Quick Start Guide

Radar PTZ Camera·Quick Start Guide
3
2 Installation
Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
Notes:
 For better detection effect, it is recommended to install the device in spacious area
without blocking.
 The tilt angle of the device should be less than 5°.
 The recommended mounting height is 4 to 5 m.
 The radar module should directly face to the target.
 Do not touch the bubble directly by hand. The image blurs otherwise.
 Do not power the speed dome up until the installation is finished. To ensure the
safety of personnel and equipment, all the installation steps should be done with
power supply off.
 Do not drag the speed dome with its waterproof cables; otherwise the waterproof
performance is affected.
Figure 2-1 Do Not Drag the Cables
2.1 Wall Mounting
Notes: