User's Manual

Network Bullet CameragQuick Start Guide

3. Hammer the plugs of the expansion screws to the ceiling.

4. Connect the power cable, network cable, and the audio/alarm

cables.

5. Fix the camera body to the ceiling with the supplied expansion

screws.

Fix the Adapter Plate Figure 2-3

6. View the image via the web browser.

7. Slightly loosen the hex screw beside the WPS/RESET button to

adjust the surveillance angle.

8. Use the supplied adjusting tool to adjust the pan [ᱡ30ᲄ], tilt

[0~80ᲄ], and rotation direction [0~360ᲄ].