User's Manual

Quick Start
H3C WA2110-AG Wireless LAN Access Point
Chapter 2
Installation
2-2
The figure below shows its LEDs.
(1) Power LED (2) 802.11a LED
(3) 802.11b/g LED (4) Ethernet status LED
Figure 2-2 LEDs of an H3C WA2110-AG
Table 2-1 describes the meaning of the LEDs.
Table 2-1 Status of LEDs
LED Meaning
Power
Indicate the working status of power supply:
ON: The device works properly.
OFF: The device is not powered on or the device is
faulty.
11a
Indicate the status of the wireless link (the device works
in the 11a mode):
OFF: The wireless line is not initialized or is faulty.
Slow blinking: Only a small amount of data is
transmitted or received through the wireless line.
Fast blinking: A large amount of data is transmitted or
received through the wireless line.