User's Manual

Installation Manual
H3C WA2200 Series WLAN Access Points Chapter 5 Software Setting
5-11
Follow these steps to set a system name:
Step Operation
1
Enter system view.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C]
2
Use the sysname command to set a system name for the AP, for example,
AP.
<H3C>system-view
[H3C]sysname AP
[AP]
II. Setting the system clock
Follow these steps to set the system clock:
Step Operation
1
Run the clock datetime command in user view to set a system time, for
example, 10:35:46, November 28, 2007.
<H3C>clock datetime 10:35:46 2007/11/28
5.4.3 Security Setting
For the purpose of security, an encryption method can be applied to the authentication
of stations and communication between wireless stations and the FAT AP. The
following describes how to set TKIP encryption.
I. Setting port encryption for WLAN-BSS
Follow these steps to set port encryption for WLAN-BSS:
Step Operation
1
Enter system view.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C]
2
Enter WLAN-BSS view, for example, WLAN-BSS 3 view.
[H3C]interface WLAN-BSS 3
[H3C-WLAN-BSS3]
3
Set an encryption method for WLAN-BSS, for example, PSK authentication
with the key being 12345678.
[H3C-WLAN-BSS3]port-security port-mode psk
[H3C-WLAN-BSS3]port-security tx-key-type 11key
[H3C-WLAN-BSS3]port-security preshared-key pass-phrase 12345678
[H3C-WLAN-BSS3]undo dot1x multicast-trigger
[H3C-WLAN-BSS3]