User's Manual
Table Of Contents
- 1. Introduction
- 1.1 Overview
- 1.2 Applications
- 1.3 Key Features
- 2. Product Overview
- 2.1 Product Picture
- 2.2 Block Diagram
- 3. Electrical Characteristics
- 3.1 Absolute Maximum Ratings – Voltage & Current
- 3.2Current consumption
- 3.3 Absolute maximum ratings – Temperature
- 3.4Absolute maximum ratings – ESD
- 4. RF Characteristics
- 4.1Basic Characteristics
- 4.2 IEEE802.11b Mode
- 4.3 IEEE802.11g Mode
- 4.4 IEEE802.11n 20Mhz Bandwidth Mode
- 4.5 IEEE802.11n 40Mhz Bandwidth Mode
- Mechanical Characteristics
- 6. Module Interfaces
- 6.1 PIN Layout
- 6.2 PIN Definitions
- 7. Reference Design
- 8.1 Antenna Selection
- 8.2 Minimizing Radio Interference
- 8.3 Specification of On-Board Antenna
- Appendix A Glossary（Quentin respible）
- Appendix B Reference paper（Quentin respible）
- Contact Us
4
www.ibroadlink.com
1.2 Applications
Smart home appliances
Remote Control
Medical/Health Care
Network consumer devices
1.3 Key Features
a． Support IEEE802.11b/g/n
Frequency Range
2.412 GHz - 2.484 GHz
Wi-Fi Standard
IEEE 802.11 b/g/n
Transmitter Power
802.11b:18dBm
802.11g:16dBm
802.11n:15dBm
MIN Receiver Sensitivity
802.11b<-82dBm@11Mbps
802.11g<-72dBm@54Mbps
802.11n<-71dBm@MCS7
Data rate
11M@802.11b, 54M@802.11g, MCS7@802.11n
Security
Encryption Standard：WEP/WEPA/WPA2
EncryptionAlgorithm：WEP64/WEP128/TKIP/AES
Wi-Fi Modes
STA/AP/STA+AP/WIFI Direct
b． Support UART\PWM\ADC\GPIO\I2C port
c． Support STA\AP\AP+STA
d． Patent Smart Config™ technology
e． Support TLS\SSL\mDNS
f． PCB printed antenna
Antenna type
PCB printed ANT
g． Power source: 3.3V
h． Dimension （L*W*H) : 31mm*17.7mm*3.6mm (Including shielding cover height)
i． ESD: 2KV