User's Manual

8
Important Notes on Reducing False Alarms:
• Do not install the camera under strong light conditions, including sunshine, bright lamp lights, etc.
• Do notplacethecameranearanyoutlets,includingtheairconditioner vents,humidier outlets,theheattransfer
vents of projectors, etc
• Do not install the camera at places with strong wind.
• Do not install the camera in front of a mirror.
• Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers and phones in order to avoid
wireless interference.
2� Installation Steps
1. Pleaseseparatethemountingplatefromthescrewbaserst.
Mounting Plate
Screw Base
2. Removetheprotectivelmfromthelens.
3. Placedrilltemplateontoacleanandatsurface.
4. (For cement wall only) Drill screw holes according to the template, and insert anchors.
5. Use screws (PA4×25)toxthemountingplateaccordingtothetemplate.
6. Rotate the screw base to the mounting plate.
7. Mount the camera to the base.
Mounting Plate
Anchor
Drill Template
Screw
Screw Base
Camera