User's Manual

5
Step 3 Plug in the Base Station
- Plug the Base Station into the power outlet and the LED
indicator will turn green, followed by light blue and then
solid blue. The device will turn on within 2 minutes. Once
the LED indicator on the Base Station is a solid blue,
proceed to the next step.
Step 4 Connect Base Station to Internet via Ethernet Cable
(for Connection via Wi-Fi, please see page 9)
- Connect the base station to your Wi-Fi router by inserting
the Ethernet cable into the bottom of the Base Station as
shown below.
- Proceed to the next step. The Base Station LED indicator
will display steady green.
Power Outlet
Network Cable
LED Indicator
POWER
WAN LAN2 LAN4LAN1 LAN3
WPS/
RESET