Smart Baby Monitor
Contents: Packing list .....................................................................................................1 Safety .............................................................................................................2 Product Introduction........................................................................................3 Installation ......................................................................................................
Packing list: Clip-on Mounting Cheego Smart Baby Camera x1 Crib Clip Bracket x1 Allen wrench for Installation x1 M8*25 Screw x1 DC 12V Power Adapter x1 QSG x1 Floor Stand Mounting Cheego Smart Baby Camera x1 Floor Stand (Bracket) x1 Counterweight plate x1 DC 12V Power Adapter x1 QSG x1 —2—
Safety and RF Statement ⚠ WARNING: Strangulation Hazard—Children have STRANGLED in cords. NEVER attempt to use cord without the protective covering. Check protective covering before each use to ensure that the cord is not exposed to your child. Immediately discontinue use if protective covering is damaged or broken. This device is designed to be used on or next to a standard crib, in the middle of the long side of the crib. Adult assembly is required.
minimum distance 20cm between the radiator and your body. Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Product Introduction Please read this user manual carefully before using the device Live Video and Two-Way Audio You could watch& record the video, set the resolution, and adjust the pan/tilt angle of the image anytime via Cheego Smart Application. Hear or speak to your baby with two-way audio of the device. Infrared Night Vision The camera will be switch to night vision mode based on the ambient light changes.
Installation Cheego Baby Monitor supports two installations: Clip-on Mounting and Floor Stand Mounting. Please watch the installation video before you start install it. 1) Clip-on Mounting The device is with Temperature Measurement function, so you need to choose one position from below three positions to install. Use the Allen wrench and M8*25 Screw to connect the camera and the clip bracket, then to fix the baby monitor to the selected position on the crib and tighten the screw.
Cheego Smart Application Download the Cheego Smart App and set up your account. Follow the in-app instructions to set up your Cheego Smart Camera. Choose: Homepage > Add your device > Scan QR code to connect>Pair succeed> Choose installation way> Choose installation position You can choose to follow the assembly instructions in-app or in this booklet.
Technical Data Model CCA3-* Sensor 1/2.5” 5MP CMOS Focal Lens 2.1mm Iris F2.0 Horizontal Viewing Angle 120° Wi-Fi 2.4GHz, IEEE 802.11b/g/n Support System Android 7.0 or IOS 11.0 or above Power DC12V, 1A, ≤10W Operationg Temperature 0-35℃ Net Weight 500 g Resolution 1280×720 TF card 32G Installation Clip-on Mounting Speaker Power 3W Frequency Range 150-20000Hz Temperature Measurement Accuracy ±0.
