Technical Specs

Upload Data to the App 3. ALERTS & SOUNDS
5
Step 1: Once your temperature
has been taken, your phone’s
Bluetooth must be on, the data
can be transmitted from the
Femometer to your phone.
When you remove the
Femometer from the case, a
single beep indicates that it is
on.
When you close the case, a
single beep indicates that the
Femometer is off.
When taking your
temperature,3 consecutive
beeps indicate that the
measurement is complete.
-
-
-
A beep lasting longer than 2
seconds indicates an error.
Please close the case and
reopen the Femometer until
the measurement is complete.
-
Step 2: The data from the
Femometer will sync
automatically to the Femometer
app. If the data does not sync,
remove the cap from the
Femometer, and tap the scale
ring in the Femometer app to
transmit the data.
EN
6 EN