Users Manual

Power Switch

1. Standard mode (Model 60A, 132A, 132B, 192B) is equipped with a power switch and a power indicator. Touch the

power switch to power on, touch it again to shut down all circuits, and stand by for more than 30 minutes.

2. Three power indicators, each representing about 33.3% of the power from left to right. When charging, the

indicators equal to the battery capacity will ﬂash, and the three indicators will be on normally after the battery is fully

charged!

Each represents about 33.3% of the electricity

Touch the power switch lightly

Can use it when the power lamp lights up