Users Manual

Pairing Steps
Step 1. Plug 2.4G USB receiver into an USB port of the computer.
Step 2. Slide the mouse ON/OFF switch to “ON” to turn on the mouse.
Step 3. On the bottom of the mouse, click the “Connect” button to choose 2.4G
channel.
Power Saving Mode
The mouse will enter sleep mode after being idle for 30 min.
Press any key to wake up.
Power Steps
If there is no light displayed at all, the battery is completely drained.
For this situation, it is time to charge.
Troubleshooting
If you are unable to connect the device to your tablet, please try the following:
1. Make sure the device be switched on.
2. Make sure the 2.4G USB receiver be inserted into a USB port of tablet.
3. Make sure that there’s enough power in the device.
4. Make sure the device are within 10m.