Specification

*DISCLAIMER: Descriptions regarding the products described herein are based solely upon information provided by the manufacturer and are
provided for informational purposes only. NOTHING CONTAINED HEREIN SHOULD BE CONSTRUED AS CREATING AN EXPRESSED OR
IMPLIED WARRANTY, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, EACH OF WHICH IS HEREBY DISCLAIMED.
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. The final determination as to the
suitability of any product of Hanes Geo Components in any particular application rests solely with the user. Hanes Geo Components reserves the
right to alter or modify its products and descriptions at any time without notice.
2014-06-01
Silt Fence 3606-B42-7 w lathe
(Product # 76173 - Indiana)
Hanes Geo Components preassembled Silt Fence 3606-B42-7 w lathe is a preassembled silt fence with
TerraTex SF-90 woven geotextile, stapled to hardwood stakes with a lathe, 6 feet on center.
Assembled Fence Characteristics
Silt Fence Geotextile
TerraTex SF-90
Geotextile Height / Length
36 in (0.914 m) x 100 ft (30.5 m)
Post Spacing
6 feet (1.83 m)
Post Height
42 inches (1.07 m)
Post Composition
Common Hardwood
Post Size
“B” 1.5 in x 1.5 in (2 inch nominal)
Fence Assembly
5 -16g Galvanized Staples/post
Lathe / Support netting or wire
Yes 24”
The TerraTex SF-90 is made up of polypropylene filaments. These filaments are woven to form a stable
and durable network such that the filaments retain their relative position. It is non-biodegradable and
resistant to most soil chemicals, acids, and alkali with a pH range of 3 to 12. TerraTex SF-90 is
manufactured to meet or exceed the following minimum average roll values:
Silt Fence Geotextile Properties
Minimum Average
Minimum Average
Roll Value
Roll Value
Property
Test Method
English
Metric
Grab Tensile
ASTM D-4632
100 x 100 lb
0.445 x 0.445 kN
Elongation
ASTM D-4632
15% x 20%
15% x 20%
Trap Tear
ASTM D-4533
50 lb
0.223 kN
UV Resistance
ASTM D-4355
80% @ 500 hr
80% @ 500 hr
AOS*
ASTM D-4751
20 - 50 US Sieve
0.85 - 0.300 mm
Permittivity
ASTM D-4491
0.10 sec
-1
0.10 sec
-1
Flow Rate
ASTM D-4491
8 gal/min/ft
2
325.6 L/min/m
2
* Maximum Average Roll Value
5/2014