Installation Manual

Subject to technical modifications without notice.
Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
5
Inset application
Face frame application — partial blockout
Side view
runner setback (see table)
Trial recommended
blocking behind frame
inside cabinet depth range
minimum
=
runner length
+
setback
+
6 (1/4")
maximum with bracket
=
runner length
+
setback
+
48 (1-7/8")
Face frame application — complete blockout
Side view
runner setback (see table)
Trial recommended
blocking behind frame
inside cabinet depth
minimum
=
runner length
+
setback
+
6 (1/4")
Setback information
Side view
NOTE: For mounting hole position add 7 (9/32") to
runner setback
Runner setback when using depth adjustable locking device (T51.1901.PS)
563/569 H/. runner setback
■ Setbacks in this table recess the
face of the drawer front inside of
the cabinet 1 (1/32
")
■ The depth adjustment can then
be used to move the drawer
f r o n t o u t t o i t s d e s i r e d p o s i t i o n ,
2.5 (3/32") out adjustment only
sub-front
thickness
13 (1/2")
20 (25/32") 23 (29/32") 26 (1-1/32")
16 (5/8")
23 (29/32") 26 (1-1/32") 29 (1-5/32")
19 (3/4")
26 (1-1/32") 29 (1-5/32") 32 (1-1/4")
16 (5/8") 19 (3/4") 22 (7/8")
drawer front thickness
calculating
runner setback
563/569 H/.
sub-front thickness
+
drawer front thickness minus 9 (11/3 2 " )
Runner setback when using all other locking devices
563/569 H/. runner setback
■ Setbacks in this table set the
face of the drawer front flush with
the face of the cabinet
■ If a depth adjustable locking
device is needed, please see
the locking device and table
above
sub-front
thickness
13 (1/2")
17. 5 (11/16") 20.5 (13/16") 23.5 (15/16")
16 (5/8")
20.5 (13/16") 23.5 (15/16") 26.5 (1-1/32")
19 (3/4")
23.5 (15/16") 26.5 (1-1/32") 29.5 (1-5/32")
16 (5/8") 19 (3/4") 22 (7/8")
drawer front thickness
calculating
runner setback
563/569 H/.
sub-front thickness
+
drawer front thickness minus 11.5 (7/16")
NOTE: Runner cannot be mounted below opening
runner setback
mounting hole position
drawer front
drawer sub-front
Panel application
Side view
runner setback (see table)
Trial recommended
inside cabinet depth range
minimum
=
runner length
+
setback
+
6 (1/4")