AssemblyInstructions

1"
(2.5 cm)
NAILS
Sealing Strip
1"
(2.5 cm)
1/2"
(1.3 cm)
First row of Shingles are installed backwards
to make a seal barrier-flush to bottom of Drip Edge
It is okay if last Shingle
overlaps it will be cut
off later
Line up notch on
top of Shingle with
edge of Roof to stagger
the Shingles
Line up notch on
side of Shingle with
edge of Roof to stagger
the Shingles
Roof
Shingle
Cut any Shingles
Overhanging Sides
Cut single Shingle
into three pieces
5-1/8"
(13cm)
5-7/8"
(14.9cm)
INSTALLING SHINGLES
A
Important: Make sure shingles overhang glass by approx. 3”.
B
C
Note: Refer to shingle manufacturers
instructions for further details.