AssemblyInstructions

49
Solar Shed
Erect Trusses All Size Buildings Cont.
6
Install Rafter Tie and Rafter Spacer
Refer to Step that correlates to the size building
you are installing.
6C. 10 x 8
Starting with the window side single gusset
rafter, place CG Rafter Tie in notch as
shown (leaving 3/4” gap
A
) attach using
one 2” (5
cm) nail. Next attach BU Rafter
Spacer using three 1
1
/4” (3cm) screws.
Continuing in this manner until all rafters
are completed will ensure proper spacing
between rafters.
10x8 Parts List
❒ 1 CG Rafter Tie 1 x 2 x 91
1
/8” 2.5 x 5 x 231.4cm
❒ 4 BU Rafter Spacer 1x2x21
1
/4” 2.5 x 5 x 54cm
3
/ 4 ”
(
1.9 cm )
6C. 10 x 8 Bldg
3
/ 4 ”
(
1.9 cm )
Rafter Tie
CG
Rafter Spacer
BU Attached
to Rafter T ie
with (3) 1/1-4”
Screws
(1) 2” Nail
A
A