AssemblyInstructions

8
Solar Shed
Phoenix 10 x 8 Floor Kit Instructions
Optional Floor Kit not supplied with Building Kit
For Handy Home optional Wood Floor Kit, refer to instructions
included with floor. Floor Instructions maybe different from this manual.
B
A
Y
Y
X
X
(2) 3" Nails
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
92-5/8"
(4) 3" Nails
at Joint
120"
(305 cm)
Center of
Stud
Center of
Stud
Center of
Stud
Center of
Stud
C
C C
C
C
D
D
D
D
E
E
E
NOTE: Part letters are not stamped on
floor kits.
ASSEMBLY OF 10’ X 92-5/8” FLOOR
FRAME
A: Position Floor Joists 89-1/2”, Floor
Bond Boards 72”, and Floor Bond
Boards 48” as shown.
Using 3” nails, nail twice through
each Bond Board & into each
end of each Joist , keeping pieces
flush at top and ends, and maintain 24”
spacing. Where & join together
use 4-3” nails.
B: Completed Floor Frame should be
positioned at building site, leveled,
using shims between floor frame and
ground before proceeding to Floor
Panel Attachment.
Square frame by making corner-to-
corner measurements (X to X and
Y to Y) the same.
2 - 48x92-5/8x5/8" Floor Panels
1 - 23-7/8x92-5/8x5/8" Floor Panel
6 - 2x4x89-1/2" Floor Joist
2 - 2x4x72" Bond Boards
2 - 2x4x48" Bond Boards
- 2" and 3" Nails
A
B
C
D
E
Parts Needed:
C
D
E
D
E
C
D
E