Brezina Installation Manual

STEP 17: ADJUSTING ROOF
PUSH UPWARD IN CENTER OF ROOF UNTIL ALL CORNERS ARE TIGHT AS SHOWN BELOW.•
YOU MAY HAVE TO REMOVE ONE SCREW FROM PEAK BRACKET ASSEMBLY TO LOOSEN UP •
THE ROOF FRAMES FROM EACH OTHER.
ASSISTANCE REQUIRED•
TIGHTEN ONLY THIS HEX BOLT CLOSEST TO THE CORNER
TIGHT
IF NEEDED.
CORNER SEAM
TO FLUSH UP FRAMES
*DO THIS AT EACH CORNER*
WHEN CORNER SEAMS ARE TIGHT,
USE BAR CLAMP(S)
PUSH UPWARD
44