Brezina Installation Manual

STEP 16: ROOF ASSEMBLY (CONT'D)

LINE-UP ALL HOLES AND INSERT HARDWARE AS SHOWN BELOW.•

HAND TIGHTEN ALL HARDWARE. ASSEMBLY MUST REMAIN LOOSE FOR ADJUSTMENT IN •

FURTHER STEPS.

BAG # HARDWARE

1719BZ 1/4" X 2-3/4" HEX BOLT X 12

1499BZ 1/4" WIDE WASHER X 24

1386BZ 1/4" LOCK NUT X 12

1/4" Wide Washer

1/4" Lock Nut1/4" x 2-3/4" Hex Bolt

1/4" Wide Washer

!!HAND TIGHTEN ALL HARDWARE AT THIS TIME!!