Brezina Installation Manual
STAMP ID WOOD COMPONENTS
K RAFTER SHORT LH X 4
L RAFTER SHORT RH X 4
M RAFTER LONG LH X 4
N RAFTER LONG RH X 4
BAG # HARDWARE
1327PC #8 X 2-1/2" WOOD SCREW X 32
STEP 12: ROOF FRAME ASSEMBLY (CONT'D)
PLACE ALL RAFTERS FLUSH TO INSIDE AND TOP OF FASCIA AND CENTERED AT EACH HOLE •
LOCATION AS SHOWN BELOW.
FASTEN RAFTERS TO FASCIA ONLY.•
SCREWS HERE YET!!
CENTER RAFTER
K
FASCIA ASSEMBLY
CORNER RAFTER LH
M
DO NOT INSTALL
CORNER
RAFTER RH
N
L
#8 x 2-1/2" Wood Screw
USE HOLES TO CENTER RAFTERS
AT ALL POSITIONS
TOPS
FLUSH
35