Brezina Installation Manual

STAMP ID WOOD COMPONENTS

R BEAM FRONT SHORT LH X 2

S BEAM FRONT SHORT RH X 2

BAG # HARDWARE

1381BZ 5/16" T-NUT X 4

1703BZ 5/16" X 1-1/2" HEX BOLT X 4

1721BZ 5/16" WIDE WASHER X 4

STEP 3: SHORT BEAM ASSEMBLY

ASSEMBLE TWO SHORT BEAM ASSEMBLIES R + S AS SHOWN BELOW. (FIG 3.1)•

VERIFY THE ASSEMBLY IS STRAIGHT ALONG THE BEAMS AND FULLY TIGHTEN ALL HARDWARE. •

(FIG 3.2)

5/16" T-NUT

5/16" WIDE WASHER

5/16" X 1-1/2" HEX BOLTS

FIG 3.1

FIG 3.2

X2RS

BEAMS MUST BE STRAIGHT