Brezina Installation Manual

STAMP ID WOOD COMPONENTS

T BEAM FRONT LONG LH X 2

U BEAM FRONT LONG RH X 2

BAG # HARDWARE

1381BZ 5/16" T-NUT X 4

1703BZ 5/16" X 1-1/2" HEX BOLT X 4

1721BZ 5/16" WIDE WASHER X 4

STEP 2: LONG BEAM ASSEMBLY

ASSEMBLE TWO BEAM PARTS T + U AS SHOWN BELOW. (FIG 2.1)•

VERIFY THE ASSEMBLY IS STRAIGHT ALONG THE BEAMS AND FULLY TIGHTEN ALL HARDWARE. •

(FIG 2.2)

FIG 2.2

5/16" T-NUT

5/16" WIDE WASHER

5/16" X 1-1/2" HEX BOLTS

FIG 2.1

NOTCHES UP

BEAMS MUST BE STRAIGHT