User Guide

Chapter 8 Page 209
Note:
See “Network preferences and TCP/IP software” in Chapter 9
for information on configuring Network HotSync preferences.
Performing a dial-in network HotSync operation
You are ready to perform a dial-in network HotSync operation after
you prepare your computer and handheld, and select your Conduit
Setup options.
To perform a dial-in network HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap the modem HotSync icon to begin the operation.
Performing a network HotSync operation via a LAN
You are ready to perform a network HotSync from another computer
on your network after you select Network from the HotSync Manager
menu on both your primary computer and the computer you want to
use for the network HotSync operation.
To perform a network HotSync operation via a LAN:
1. Place your handheld in a cradle that is connected to a computer on
the LAN.
2. Press the HotSync button on the cradle.
HotSync Manager finds your primary computer on the LAN and
synchronizes with the data on your primary computer.