User Guide

Page 204 Advanced HotSync® Operations
4. Click OK.
Preparing your handheld
There are a few steps you must perform to prepare your handheld for
a modem HotSync operation.
To prepare your handheld for a modem HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap Modem.
4. Tap the pick list below the HotSync icon and select Standard
Modem.
5. Tap the Enter Phone # field.
Note:
If you plan to connect to your company’s dial-in server
(network modem) instead of connecting to a computer
modem, see “Conducting a HotSync operation via a
network” later in this chapter.
Modem
Identifies the modem type or manufacturer.
Refer to your modem manual or face plate for
its type or settings. If you’re not sure of your
modem type or your modem doesn’t match
any that appear in the list, select Hayes Basic.
Setup String
Identifies the setup string for your particular
modem. Not all modems require a setup
string. Refer to your modem manual and enter
the setup string if recommended by the
manufacturer.