User Guide

Chapter 8 Page 203
Preparing your computer
There are a few steps you must perform to prepare your computer for
a modem HotSync operation. Be sure to perform these steps before
you leave your office so that your computer is ready to receive a call
from your handheld.
To prepare your computer for a modem HotSync operation:
1. Confirm that the computer modem is connected and turned on,
and that no communications applications, such as fax or telephony
software, are running on a COM port.
Note:
Make sure the computer is disconnected from all
online services, such as America Online (AOL) and
CompuServe. This helps to avoid conflicts with the
COM port.
2. Start HotSync Manager if it is not already running, and from the
HotSync Manager menu, choose
Modem.
3. Adjust the following options as needed.
Serial Port
Identifies the port for the modem. If you are
unsure of the port assignment, look at the
Modem Properties in the Windows Control
Panel.
Speed
Determines the speed at which data is
transferred. Try the As Fast As Possible rate
first, and adjust downward if you experience
problems. This setting allows Palm Desktop
software and your handheld to find and use
the fastest speed.