Visor™ Handheld User Guide
Copyright Copyright © 1999-2000 Handspring, Inc. All rights reserved. Portions copyright © 19982000 Palm Computing, Inc. or its subsidiaries. All rights reserved. Handspring, Springboard, Visor, the Handspring logo, and the Springboard logo are trademarks of Handspring, Inc., and may be registered in some jurisdictions. Palm Computing, Graffiti, and HotSync are registered trademarks, and the HotSync logo, Palm OS, Palm, and the Palm Computing Platform logo, are trademarks of Palm Computing, Inc.
Contents About This Guide ....................................................................................... 1 Chapter 1: Introduction to Your Visor Handheld Getting to know your Visor handheld ...............................................3 What is a Visor handheld? ...............................................................3 System requirements ........................................................................4 Upgrade information ...........................................................
Chapter 3: Managing Your Applications Using the Applications Launcher..................................................... 37 Selecting applications ..................................................................... 37 Switching between applications ................................................... 37 Categorizing applications .............................................................. 37 Changing the Applications Launcher display ............................ 38 Choosing preferences ................
Sorting lists of records ........................................................................73 Making records private ......................................................................74 Hiding private records ...................................................................74 Attaching notes ....................................................................................76 Choosing fonts .....................................................................................
Calculator........................................................................................... 123 Selecting the Calculator mode .................................................... 123 Using the Basic Calculator buttons ............................................ 123 Displaying Recent Calculations .................................................. 124 Using the Advanced Calculator mode ...................................... 124 Using the Advanced Calculator buttons .................................
Chapter 8: Advanced HotSync® Operations Selecting HotSync setup options.....................................................177 Customizing HotSync application settings ...................................180 Conducting a HotSync operation via modem...............................182 Preparing your computer ............................................................182 Preparing your handheld .............................................................
Appendix A: Maintaining Your Handheld Caring for your handheld................................................................ 217 Battery considerations...................................................................... 218 Resetting your handheld ................................................................. 219 Performing a soft reset ................................................................. 219 Performing a hard reset ...............................................................
About This Guide Welcome to the Visor™ handheld computer. This guide is designed to help you get up and running quickly on your handheld. It describes all you need to know about how to use your Visor handheld and the applications that come with it.
Page 2
Chapter 1 Introduction to Your Visor Handheld This chapter explains the physical buttons and controls on your Visor handheld computer, how to use your Visor handheld for the first time, and how to use HotSync® technology to synchronize your Visor handheld and Palm™ Desktop software.
System requirements To install and operate Palm Desktop software, your computer system must meet the following requirements: Windows minimum requirements ■ Windows 98 or later (for USB cradle) --or-Windows 95 or Windows NT 4.0 (for serial cradle) ■ IBM-compatible 486 (or higher) computer ■ 8 MB RAM (memory) minimum, 16 MB recommended ■ 25 MB available hard disk space ■ VGA monitor or better ■ CD-ROM drive (you can also download the Palm Desktop software from http://www.handspring.
Upgrade information If you already own a handheld that is compatible with the Palm Computing® platform, Handspring recommends that you install the version of Palm Desktop software that comes with your Visor handheld into the same folder as your current Palm Desktop software. When you install the new version in the same folder as the previous version, all your data is preserved.
Each handheld must have a unique name After you complete the upgrade process described above, you have two handhelds with the same name. This is an undesirable situation. Each handheld must have a unique name in order to prevent unexpected results during HotSync operations and other complications. We strongly recommend that you perform a hard reset on your old handheld. See “Performing a hard reset” in Appendix A for details.
Application buttons Activates the individual applications that correspond to the icons on the buttons: Date Book, Address Book, To Do List, and Memo Pad. See “Buttons preferences” in Chapter 9 for details on reassigning these buttons to activate any application on your Visor handheld. Tip: If your Visor handheld is turned off, pressing any application button activates the handheld and opens the corresponding application.
Using the backlight If you have difficulty seeing the information on your Visor handheld, you can use the backlight to illuminate your screen. To activate the backlight: ■ Press the power button and hold it down for about two seconds. Release the button when the backlight turns on. Tip: In addition, you can assign the full-screen pen stroke to activate the backlight. See “Pen preferences” in Chapter 9 for more information.
Locating back panel components Springboard expansion slot protector Stylus IR port Reset button Battery door USB and serial connector Springboard expansion slot protector Slides in and out of the Springboard expansion slot. You can replace the slot protector with a Springboard expansion module to add features to your handheld. Stylus Slides in and out of the slot in the back panel of the handheld. To use the stylus, remove it from the slot and hold it as you would a pen or pencil.
Installing the batteries To use your Visor handheld, you must install two AAA alkaline batteries. The batteries fit behind the battery door on the back of the handheld. See “Battery considerations” in Appendix A for more information. To install the batteries: 1. Press the latch on the battery door and lift the battery door away from your handheld. 2. Install the two AAA alkaline batteries supplied with your handheld into the battery compartment.
Tapping and typing Tap with the stylus to get things done Like using a mouse to click elements on a computer screen, using the stylus to tap elements on your handheld screen is the basic action that gets things done on your handheld. The first time you start your Visor handheld, setup instructions appear on the screen. These instructions include a calibration screen, or digitizer.
Elements of the handheld interface Menu bar Pick list Check box Command buttons Icons Menu bar A set of commands that are specific to the application. Not all applications have a menu bar. Command buttons Tap a button to perform a command. Command buttons appear in dialog boxes and at the bottom of application screens. Icons Tap the icons to open applications Calculator , menus , , and to find text anywhere in your data .
Previous/next arrows Scroll bar Next/ previous arrows Tap the up and down arrows to display the previous and next page of information; tap the left and right arrows to display the previous and next record. Scroll bar Drag the slider, or tap the top or bottom arrow, to scroll the display one line at a time. To scroll to the previous page, tap the scroll bar just above the slider. To scroll to the next page, tap the scroll bar just below the slider.
To open an application: 1. Tap the Applications icon . 2. Tap the icon of the application that you want to open. If you have many applications installed on your Visor handheld, tap the scroll bar to see all of your applications. Tip: To find an application quickly, you can write the Graffiti character for the first letter of its name. The Applications Launcher scrolls to the first application with a name that begins with that letter. You can also assign application icons to different categories.
Tap the Menu icon In this example, three menus are available: Record, Edit, and Options. The Record menu is selected and contains the commands New Memo, Delete Memo, and Beam Memo. Choosing a menu After you open the menu bar for an application, tap the menu that contains the command you want to use. The menus and menu commands that are available depend on the application. Also, the menus and menu commands vary depending on which part of the application you’re using.
Draw the Command stroke anywhere in the Graffiti area, and immediately write the corresponding command letter in the Graffiti letter area. When you draw the Command stroke, the word “Command” appears just above the Graffiti writing area to indicate that you are in Command mode. Command For example, to choose Select All in the Edit menu, draw the Command stroke, followed by the letter “s.
Onscreen keyboard When you create or edit a record in an application such as Address Book, you can open the onscreen alphabetic and numeric keyboards to enter data. Tap here for numeric keyboard Tap here for alphabetic keyboard After a keyboard is open, you can tap to open any of the other keyboards, including the international keyboard. See “Using the onscreen keyboard” in Chapter 2 for more information. Note: You cannot enter Graffiti characters while using the onscreen keyboard.
Write letters here Write numbers here Division marks Your Visor handheld also includes Giraffe, a game you can use to practice Graffiti writing. See “Installing and removing applications” in Chapter 3 for installation instructions. The Memo Pad application is ideal for practicing Graffiti writing. This section explains how to open Memo Pad and use it to practice Graffiti writing. To open Memo Pad: 1. Press the Memo Pad application button . 2. Tap New.
Using Palm Desktop software If you have new records you want to add to your Visor handheld and prefer to use the computer keyboard rather than the onscreen keyboard, enter the data in the Palm Desktop software or the PIM you have installed to use with your handheld. After the information is in Palm Desktop software, perform a HotSync operation to synchronize your handheld with your computer. See “Exchanging and updating data: HotSync operations” in Chapter 5 for more information.
Customizing your handheld You can customize your handheld by using the Preferences application. You can enter personal information such as your name and address; change the time and date; view different date and time formats when you travel; turn off sounds; and configure your handheld to work with a modem or network. See Chapter 9 for more information on customizing your handheld. To open the Preferences screens: 1. Tap the Applications icon 2. Tap the Preferences icon . . 3.
To set the current date: 1. Tap the Set Date box. 2. Tap the arrows to select the current year. Tap arrows to select year Tap to select month Tap to select date 3. Tap a month. 4. Tap the current date. Palm Desktop software Palm Desktop software includes the same main applications as your Visor handheld: Address Book, Date Book, To Do List, Memo Pad, Expense, and desktop e-mail connectivity.
■ Import and export data, so you can easily transfer data from other desktop applications into any of your main applications. See “Importing data” in Chapter 2 for more information. ■ Print your Date Book, Address Book, To Do List, and Memo Pad information on any printer. Connecting the cradle The cradle that comes with your Visor handheld enables you to synchronize the information on your Visor handheld with the Palm Desktop software using HotSync technology.
To ensure a safe and uninterrupted installation of Palm Desktop software, please do the following before installing: ■ If you are installing from diskettes (rather than the CD-ROM included in the box), make sure the original Palm Desktop software diskettes are write-protected, and then make backup copies of them. When you finish, use the copies to install the software, and store the original diskettes in a safe place.
Installing a Springboard module Springboard expansion modules enable you to extend the functions of your handheld. To install a Springboard module, simply remove the slot protector and insert the module in the Springboard expansion slot until the connectors are secure.
Chapter 2 Entering Data in Your Visor Handheld This chapter explains how to enter data into your Visor handheld computer, by writing with the stylus in the Graffiti® writing area, by using the onscreen keyboard, by using the computer keyboard, or by importing data from another application. Using Graffiti writing to enter data Chapter 1 introduced Graffiti writing and briefly described how to use it to enter text in your applications.
■ Most characters require only a single stroke. When you lift the stylus from the Graffiti writing area, your handheld recognizes and displays the text character immediately. To accomplish single strokes, some Graffiti strokes are portions of the regular alphabet equivalents. ■ The Graffiti writing area is divided into two parts: one for writing the letters of the alphabet and one for writing numbers. The small marks at the top and bottom of the Graffiti writing area indicate the two areas.
4. Start your stroke at the heavy dot and draw the stroke shape as it appears in the tables. 5. Lift the stylus from the screen at the end of the stroke shape. That’s all there is to it! When you lift the stylus from the screen, your handheld recognizes your stroke immediately and prints the letter at the insertion point on the screen. As soon as you lift the stylus from the screen, you can begin the stroke for the next character you want to write.
The Graffiti alphabet Letter Strokes Letter A N B O C P D Q E R F S G T H U I V J W K X L Y M Z Space Back Space Carriage Return Period Page 28 Strokes tap twice Entering Data in Your Visor Handheld
Writing capital letters You make capital letters with the same stroke shapes as the basic alphabet characters. To make capital letters, you must first “shift” to caps — just as you press the Shift key on a keyboard — and then write the character strokes. Note: Graffiti writing includes a feature that automatically capitalizes the first letter when you create a new sentence or a new record (by tapping New or a blank line).
Graffiti numbers Number Strokes Number 0 5 1 6 2 7 3 8 4 9 Strokes Writing punctuation marks Graffiti writing can create any punctuation symbol that you can enter from a standard keyboard. All punctuation marks begin with a single tap on the Graffiti writing area. When you make this tap, you activate Punctuation Shift and a dot appears to show it is active. The next stroke you make with the stylus creates a punctuation mark.
Symbol Stroke Symbol Stroke Period .
Writing accented characters To create accented characters, draw the stroke normally used to create the letter, followed by an accent stroke. Graffiti writing then adds the accent to the letter. For example, the following diagram shows the strokes required to draw an accented “e.
Navigation strokes In addition to character symbols, Graffiti writing includes special strokes that you can use to navigate within text or fields in your applications. Command Stroke Move cursor right Move cursor left Previous field (Address Book only) Next Field (Address Book only) Open Address Record (Address Book only) Graffiti ShortCuts Graffiti ShortCuts make entering commonly used words or phrases quick and easy. ShortCuts are similar to the Glossary or Autotext features of some word processors.
Your handheld includes the following predefined Graffiti ShortCuts: Entry ShortCut Date stamp ds Time stamp ts Date / time stamp dts Meeting me Breakfast br Lunch lu Dinner di Using the onscreen keyboard You can open the onscreen keyboard anytime you need to enter text or numbers on your handheld. Note that you cannot enter Graffiti characters while using the onscreen keyboard. To use the onscreen keyboard: 1. Open any application (such as Memo Pad). 2. Tap any record, or tap New. 3.
Using your computer keyboard If you have a lot of data to enter, or prefer to use the computer keyboard, you can use Palm™ Desktop software, or any supported PIM, to enter information. You can then perform a HotSync® operation to synchronize the information on your computer with the information on your handheld. All the main applications on your handheld are available in Palm Desktop software and in most PIMs. Refer to Palm Desktop online Help for more information on entering data on your computer.
To import data: 1. Open Palm Desktop software. 2. Click the application into which you want to import data. 3. If you are importing records that contain a field with category names, do the following: Select All in the Category box. Be sure that the same categories that appear in the imported file also exist in the application. If the categories do not exist, create them now; otherwise, the records are imported into the Unfiled category. 4. From the File menu, choose Import. 5.
Chapter 3 Managing Your Applications This chapter explains how to switch between applications on your Visor handheld computer, how to change application settings so they are personalized to your work methods, and how to categorize applications so you view them in related groups. Using the Applications Launcher To open the Applications Launcher, tap the Applications icon . Selecting applications Your Visor handheld is equipped with a variety of applications.
To categorize an application: 1. Tap the Applications icon 2. Tap the Menu icon . . 3. Tap App, and then tap Category. 4. Tap the pick list next to each application to select a category. Tip: To create a new category, tap Edit Categories from the pick list. Tap New, enter the category name, and then tap OK to add the category. Tap OK. 5. Tap Done. To display applications by category: 1. Tap the Applications icon . 2.
To change the Applications Launcher display: 1. Tap the Applications icon 2. Tap the Menu icon . . 3. Tap Options, and then tap Preferences. 4. Tap the View By pick list and select List. 5. Tap OK. To open the Applications Launcher to the last opened category: 1. Tap the Applications icon 2. Tap the Menu icon . . 3. Tap Options, and then tap Preferences. 4. Tap the Remember Last Category check box to select it. 5. Tap OK.
Installing and removing applications This section explains how to install and remove applications on your Visor handheld and how to remove Palm™ Desktop software from your computer. Installing add-on applications Your Visor handheld comes with the Date Book, Date Book Plus, Address Book, To Do List, Memo Pad, Expense, Calculator, City Time, and Mail applications installed and ready to use. You can also install additional applications on your handheld, such as games and other software.
3. Click Install. Tip: You can also access the Install Tool dialog by selecting Install Tool from the Palm Desktop program group or by double-clicking any file with a PRC file extension. 4. In the User drop-down list, select the name that corresponds to your Visor handheld.
5. Click Add. 6. Select the application(s) that you want to install on your handheld. 7. Click Open. Note: Review the list of applications you selected in the Install Tool dialog box. If you do not want to install an application, select it, and then click Remove. (This does not remove the application from your computer; it simply removes it from the list of applications to install.) 8. Click Done. 9. Perform a HotSync operation to install the application(s) you selected in step 6.
Removing applications In the event that you run out of memory or decide that you no longer need an application you installed, you can remove applications from your handheld. You can remove only add-on applications, patches, and extensions that you install; you cannot remove the applications that reside in the ROM portion of your handheld. To remove an add-on application: 1. Tap the Applications icon 2. Tap the Menu icon . . 3. Tap App, and then tap Delete. 4. Tap the application that you want to remove.
Security Your handheld comes with a Security application so that unauthorized users cannot view the entries you wish to protect. In Security, you can do the following: ■ Turn off and lock your handheld so that it does not operate until you enter the correct password. ■ Hide records that you mark as private. You can hide private records with or without a password. Without a password, private records are hidden until you set the Security application to show them.
Changing or deleting a password Once you define a password for your handheld, you can change or delete it at any time. You must enter the current password before you can change or delete it. To change or delete your password: 1. Tap the Password box. 2. Enter the current password. Tap here 3. Tap OK. 4. Do one of the following: To change the password, enter the new password, and tap OK. To delete the password, tap Delete.
To lock your handheld with a password: 1. Perform a HotSync operation to synchronize the data between your handheld and your computer. See “Other ways to delete records” in Chapter 5 for information on synchronizing your data. 2. Assign a password. 3. Tap Turn Off & Lock Device. Tap Off and Lock 4. Tap Off & Lock. 5. To start your handheld, turn it on, and then enter the password.
Chapter 4 Overview of Basic Applications This chapter briefly describes each application and how to open it.
Date Book Date Book lets you quickly and easily schedule appointments or any kind of activity associated with a time and date. In Date Book, you can do the following: ■ Enter a description of your appointment and assign it to a specific time and date. ■ Display a chart of your appointments for an entire week. The Week View makes it easy to spot available times and any potential scheduling overlaps or conflicts.
Date Book Plus Date Book Plus is an enhanced version of the Date Book application. In addition to all the standard Date Book features, it provides a variety of advanced views and functions. In Date Book Plus, you can do the following: ■ View To Do List items in select calendar views. ■ Display a chart of your appointments for one or two weeks complete with descriptions of each event. ■ Display a calendar of an entire year. ■ Display a list of your appointments in List View.
Address Book Address Book enables you to keep names, addresses, phone numbers, and other information about your personal or business contacts. In Address Book, you can do the following: ■ Quickly look up or enter names, addresses, phone numbers, and other information. ■ Enter up to five phone numbers (home, work, fax, car, etc.) or e-mail addresses for each name. ■ Define which phone number appears in the Address List for each Address Book entry.
To Do List To Do List is a convenient place to create reminders and prioritize the things that you have to do. In To Do List, you can do the following: ■ Make a quick and convenient list of things to do. ■ Assign a priority level to each task. ■ Assign a due date for any or all of your To Do List items. ■ Assign To Do List items to categories so that you can organize and view them in logical groups. ■ Sort your To Do List items either by due date, priority level, or category.
Memo Pad Memo Pad provides a place to take notes that are not associated with records in Date Book, Address Book, or To Do List. In Memo Pad, you can do the following: ■ Take notes or write any kind of message on your handheld computer. ■ Drag and drop memos into popular computer applications like Microsoft Word when you synchronize using Palm™ Desktop software and HotSync® technology. ■ Assign memos to categories so that you can organize and view them in logical groups.
Calculator Calculator enables you to perform addition, subtraction, multiplication, division and a variety of scientific calculations. In Calculator, you can do the following: ■ Perform basic calculations. ■ Store and retrieve values. ■ Display the last series of calculations, which is useful for confirming a series of “chain” calculations. ■ Switch to advanced mode and perform scientific calculations. To open Calculator: ■ Tap the Calculator icon Chapter 4 next to the Graffiti® writing area.
CityTime CityTime helps you keep track of the time anywhere around the globe. In CityTime, you can do the following: ■ Select a home city as a point of reference. ■ Display the day and time in four other cities simultaneously. ■ Add a definition for any city that isn’t in the default list. ■ Display sunrise and sunset information for your home city. To open CityTime: 1. Tap the Applications icon 2. Tap the CityTime icon Page 54 . .
Expense Expense lets you keep track of your expenses and then transfer the information to a spreadsheet on your computer. In Expense, you can do the following: ■ Record dates, types of expenses, amount spent, payment method, and other details associated with any money that you spend. ■ Assign expense items to categories so that you can organize and view them in logical groups. ■ Keep track of vendors (companies) and people involved with each particular expense.
Page 56 Overview of Basic Applications
Chapter 5 Common Tasks This chapter provides instructions on how to do tasks that you can do in most or all of the basic applications. It’s easy to transfer what you learn in one application to the others because the structure and behavior of all the applications are quite similar. The term “records” is used to refer to an individual item in any of the basic applications: a single Date Book event, Address Book entry, To Do List item, Memo Pad memo, or Expense item.
Editing records After you create a record, you can change, delete, or enter new text at any time. Two screen features tell you when your handheld is in editing mode: ■ A blinking cursor ■ One or more edit lines Blinking cursor Edit line Entering text For information on how to enter text using Graffiti writing, the onscreen keyboard, or the keyboard attached to your computer, see Chapter 2. Edit menu The Edit menu is available with any screen where you enter or edit text.
Undo Reverses the action of the last edit command. For example, if you used Cut to remove text, Undo restores the text you removed. Undo also reverses deletions done by using backspace. Cut Removes the selected text and stores it temporarily in the memory of your handheld. You can paste the text you cut into another area of the current application or into a different application. Copy Copies the selected text and stores it temporarily in the memory of your handheld.
Deleting records To delete a record in any of the basic applications: 1. Select the record you want to delete. 2. Tap the Menu icon . 3. Tap Record, and then tap the Delete command: Date Book: Delete Event Address Book: Delete Address To Do List: Delete Item Memo Pad: Delete Memo Expense: Delete Item A confirmation dialog box appears. If you want to save a copy of the deleted item to an archive file in Palm Desktop software, be sure that the check box is checked.
Purging records Over time, as you use Date Book, To Do List, and Expense, you’ll accumulate records in these applications that have outlived their usefulness. For example, events that occurred months ago remain in the Date Book, and To Do List items that you marked as completed remain in the list, as do Expense items. All these outdated records take up memory on your handheld, so it’s a good idea to remove them by using Purge.
Exchanging and updating data: HotSync operations The HotSync process automatically synchronizes — that is, exchanges and updates — data between your handheld and Palm Desktop software. Changes you make on your handheld or Palm Desktop software appear in both places after a HotSync operation. HotSync technology synchronizes only the needed portions of files, thus reducing synchronization time.
2. If the HotSync Manager is not running, start it: On the Windows desktop, click Start, and then choose Programs. Navigate to the Palm Desktop software program group and choose HotSync Manager. Alternatively, you can start the Palm Desktop software which automatically opens the HotSync Manager. 3. Press the HotSync button on the cradle. HotSync button Important: The first time you perform a HotSync operation, you must enter a user name in the New User dialog box and click OK.
Categorizing records Categorize records in the Address Book, To Do List, Memo Pad, and Expense applications so that they are grouped logically and are easy to review. (You can also categorize applications. See “Using the Applications Launcher” in Chapter 3 for more information.) When you create a record, your handheld automatically places it in the category that is currently displayed. If the category is All, your handheld assigns it to the Unfiled category.
To move a record into a category: 1. Select the record you want to categorize. 2. In Address Book only: Tap Edit. 3. Tap Details. 4. Tap the Category pick list to display the list of available categories. 5. Select the category for the record. 6. Tap OK. To display a category of records: 1. Tap the category pick list in the upper-right corner of the List screen. Tap here 2. Select the category you want to view. The List screen now displays only the records assigned to that category.
To define a new category: 1. Tap the category pick list in the upper-right corner of the screen. Tap here 2. Tap Edit Categories. 3. Tap New. 4. Enter the name of the new category, and then tap OK. 5. Tap OK. You can assign any of your records to the new category.
To rename a category: 1. Tap the category pick list in the upper-right corner of the screen. 2. Tap Edit Categories. 3. Select the category that you want to rename, and then tap Rename. 4. Enter the new name for the category, and then tap OK. 5. Tap OK. Tip: You can group the records in two or more categories into one category by giving the categories the same name.
Finding records Your handheld offers several ways to find information quickly: ■ All applications: Find locates any text that you specify, always starting with the current application. ■ Date Book, To Do List, Memo Pad: Phone Lookup displays the Address List screen and lets you add the information that appears in this list to a record. ■ Address Book: The Look Up line lets you enter the first letters of a name to scroll immediately to that name.
The list scrolls to the first entry that begins with that letter. If you write another letter, the list scrolls to the first entry that starts with those two letters. For example, writing an “s” scrolls to “Sands,” and writing “sm” scrolls further to “Smith.” If you sort the list by company name, the Look Up feature scrolls to the first letter of the company name. 3. Tap the record to view its contents. Using Find You can use Find to locate any text that you specify, in any application. To use Find: 1.
Using Phone Lookup Phone Lookup displays the Address List screen and lets you add the information that appears in this list to a record. To use Phone Lookup: 1. Display the record in which you want to insert a phone number. The record can be in Date Book, To Do List, or Memo Pad. 2. Tap the Menu icon . 3. Tap Options, and then tap Phone Lookup. 4. Begin to spell the last name of the name you want to find. The list scrolls to the first record in the list that starts with the first letter you enter.
Phone Lookup tips Write the Graffiti Command stroke “/L” to activate the Phone Lookup feature. You can also activate it in the following circumstances: ■ While entering text: For example, to insert the full name and phone number for someone with the last name “Williams,” write the Graffiti characters for “Wi” and then the Phone Lookup Command stroke “/L.
Tap here 4. Tap Lookup. The Attendees Lookup screen displays all the names in your Address Book that have data in the Company field. 5. Select the name you want to add, and then tap Add. The name appears in the Attendees screen. 6. Repeat steps 4 and 5 to add more names. 7. Tap Done. 8. Tap OK.
Sorting lists of records You can sort lists of records in various ways, depending on the application. Sorting is available in applications that have List screens: Address Book, To Do List, Memo Pad, and Expense. Note: You can also assign records to categories. See “Categorizing records” earlier in this chapter. To sort records in To Do List and Expense: 1. Open the application to display the List screen. 2. Tap Show. 3. Tap the Sort by pick list and select an option. 4. Tap OK.
Making records private In all basic applications except Expense, you can make individual records private. Private records remain visible and accessible, however, until you select the Security setting to hide all private records. See “Security” in Chapter 3 for more information. Hiding private records You can hide records that you mark as private. If you define a password, you must enter it to display private records. To hide private records: 1. Tap the Applications icon . 2. Tap Security. 3. Tap Hide.
Tap Show 4. Enter your password, and then tap Show. To make a record private: 1. Display the entry that you want to make private. 2. Tap Details. 3. Tap the Private check box to select it. 4. Tap OK.
Attaching notes In all basic applications except Memo Pad, you can attach a note to a record. A note can be up to several thousand characters long. For example, for an appointment in Date Book, you can attach a note with directions to the location. To attach a note to a record: 1. Display the entry to which you want to add a note. 2. In Address Book only: Tap Edit. 3. Tap Details. 4. Tap Note. 5. Enter your note. 6. Tap Done. A small note icon appears at the right side of any item that has a note.
Choosing fonts In all basic applications except Expense, you can change the font style to make text easier to read. You can choose a different font style for each application. Large font Small font Bold font To change the font style: 1. Open an application. 2. Tap the Menu icon . 3. Tap Options, and then tap Font. 4. Tap the font style you want to use. Tap here for bold font Tap here for large font Tap here for small font 5. Tap OK.
Page 78 Common Tasks
Chapter 6 Application Specific Tasks This chapter is organized by application and gives instructions on how to do tasks that are specific to each of the following applications: ■ Date Book ■ Date Book Plus ■ Address Book ■ To Do List ■ Memo Pad ■ Calculator ■ CityTime ■ Expense Chapter 6 Page 79
Date Book When you open Date Book, the screen shows the current date and a list of times for a normal business day. Scheduling an event A record in Date Book is called an “event.” An event can be any kind of activity that you associate with a day. You can enter a new event on any of the available time lines. When you schedule an event, its description appears on the time line, and its duration is automatically set to one hour. You can easily change the start time and duration for any event.
3. If the event is one hour long, skip to step 7. If the event is longer or shorter than an hour, tap the time of the event to open the Set Time dialog box. Tap the time of an event Tip: You can also open the Set Time dialog (to select a start time) by making sure no event is selected, and then writing a number on the number side of the Graffiti writing area. 4. Tap the time columns on the right side of the Set Time dialog to set the Start Time.
To schedule an event for another day: 1. Select the date you want for the event by doing one of the following: ■ Tap the day of the week that you want in the date bar at the top of the screen. If necessary, tap the Previous week or Next week scroll arrows to move to another week. Previous week Next week Tap to select a day of the current week Tip: ■ You can also use the scroll buttons on the front panel of your handheld to move forward or backward one day at a time.
To schedule an untimed event: 1. Select the date that you want for the event as described in “To schedule an event for another day.” 2. Tap New. 3. Tap OK, so that no start or end times are defined for the new event. Tip: You can also create a new untimed event by making sure no event is selected and then writing letters in the Graffiti writing area. 4. Enter a description of the event. New untimed event No time selected 5. Tap a blank area on the screen to deselect the untimed event.
Rescheduling an event You can easily make changes to your schedule with your handheld. To reschedule an event: 1. Tap the event you want to reschedule. 2. Tap Details. 3. To change the time, tap the Time box and select a new time. 4. To change the date, tap the Date box and select a new date. 5. Tap OK. Setting an alarm for an event The Alarm setting enables you to set an audible alarm for events in your Date Book. You can set an alarm to sound minutes, hours, or days before an event.
Alarm for untimed events: You can set a silent alarm for an untimed event. In this case, the alarm triggers at the specified period of minutes, hours, or days before midnight (beginning) of the day of the untimed event. No audible alarm sounds for an untimed event; instead, the reminder message appears onscreen. For example, you set an alarm for an untimed event that occurs on February 4th. If the alarm is set for 5 minutes, the reminder message appears at 11:55 PM on the night of February 3rd.
5. Enter a number that corresponds to how often you want the event to repeat on the Every line. For example, if you select Month and enter the number 2, the event repeats every other month. 6. To specify an end date for the repeating or continuous event, tap the End on pick list and tap Choose Date. Use the date picker to select an end date. 7. Tap OK. After you schedule a repeating or continuous event, this icon appears to the far right of the event.
Changing the Date Book view In addition to displaying the calendar for a specific day, you can also display a whole week or month, as well as the current time. Note: The Date Book Plus application includes additional calendar views and extended features. You can select Date Book Plus as your default Date Book application. See “Selecting the default Date Book” later in this chapter for details.
Previous week Next week Tap for that day Bar indicates earlier event Dot indicates untimed event Bar indicates later event 3. Tap an event to show a description of the event. Event details Tap to show event details Tips for using Week View Keep the following points in mind: ■ To reschedule an event, tap and drag the event to a different time or day. ■ Tap a blank time on any day to move to that day and have the time selected for a new event.
Working in Month View The Month View screen shows which days have events scheduled. Dots and lines in the Month View indicate events, repeating events, and untimed events. Previous/next month Dashed line indicates continuous event Dots on right side indicate events Dots below date indicate untimed events Month View button You can control the dots and lines that appear in the Month View. See “Options menu” later in this chapter.
Event conflicts Date Book menus Date Book menus are shown here for your reference, and Date Book features that are not explained elsewhere in this guide are described here. See “Using menus” in Chapter 1 for information about choosing menu commands.
Display Options Chapter 6 Enables you to change Date Book’s appearance and which events display. ■ Show Time Bars. Activates the time bars that appear in the Day View. The time bars show the duration of an event and illustrate event conflicts. ■ Compress Day View. Controls how times appear in the Day View. When Compress Day View is off, all time slots display.
Preferences About Date Book Page 92 ■ Start/End Time. Defines the start and end times for Date Book screens. If the time slots you select do not fit on one screen, you can tap the scroll arrows to scroll up and down. ■ Alarm Preset. Automatically sets an alarm for each new event. The silent alarm for untimed events is defined by minutes, days, or hours before midnight of the date of the event. ■ Alarm Sound. Sets the tone of the alarm. ■ Remind Me. Defines how many times the alarm sounds.
Date Book Plus In addition to all the standard Date Book features, Date Book Plus provides three extra views: Week View with Text, Year View, and List View. Date Book Plus also includes advanced features such as floating events, To Do List integration, the Daily Journal, and templates. This section describes the views and features which are unique to Date Book Plus. See “Date Book” earlier in this chapter for information on the standard Date Book features.
Working in Year View The Year View shows an overview of your calendar for an entire year. Description of event on selected date Dot indicates scheduled events Indicates selected date Scroll to other days Year View button Tips for using Year View Keep the following points in mind: ■ Tap a day to display events for that day in the title bar. A minus sign indicates only one event is scheduled on that day. A plus sign indicates multiple events are scheduled on that day.
Working in List View The List View is a text oriented view that is integrated with To Do List. It displays a list of events and To Do items for the selected week(s). Selected week’s dates Scroll to other weeks List View button Tips for using List View Keep the following points in mind: ■ Tap a line to select it. The start and end time display briefly in the title bar. To redisplay the event details, tap to the left of the description.
You can distinguish a floating event from an integrated To Do List item by the circle that appears next to the floating event (in place of the To Do List item priority number and check box). Floating events appear in alphabetical order at the top of the Day View screen between any integrated To Do List items and untimed events. To create a floating event: 1. Tap the Day View button. 2. Tap New and select Floating Event from the list. Tap to create a floating event 3. Enter a description of the event. 4.
Working with To Do List items Date Book Plus can create and display To Do List items. To Do List items appear in priority order at the top of the Day View screen. To create To Do List items in Date Book Plus: 1. Tap the Day View button. 2. Tap New and select To Do from the list. Tap to create a To Do List item 3. Enter a description of the To Do List item. 4. Tap a blank area on the screen to deselect the item. To mark a To Do List item complete: ■ Tap the check box next to the item.
Using the Daily Journal You can use the Daily Journal feature to record events as they occur. Events are recorded with automatic time-stamping as Date Book Plus Notes so they do not clutter your schedule. The Daily Journal is especially useful for tracking activities such as sales calls, start and end times for consulting or other work, or keeping a record of how you spend your time at the office. To create a Daily Journal entry: 1. Tap the Day View button. 2.
Using templates You can use templates to create a list of standard events. You can then select an event from this list and add it to your calendar. Since Date Book Plus saves all the event attributes, including alarms and notes, templates can really save you time when entering reminder notices or events that recur on different days and times. To create a template: 1. Select the event you want to save as a template. 2. Tap the Menu icon . 3. Tap Record, and then tap Create Template.
Using snooze alarms When you set alarms in Date Book Plus, the Reminder & Snooze dialog box appears in place of the standard reminder message. You can use this dialog box to reset the alarm to sound in a specified period of time. Selecting the default Date Book The default Date Book is the application that appears when you press the Date Book button on the front of your handheld. By default, this is the standard Date Book application.
Record menu New To Do Creates a new To Do List item and adds it to your Date Book Plus and To Do List database. Duplicate Item Creates a copy of the selected event and opens the Details dialog box for the new event. UnDelete from Archive Restores the last event you deleted from Date Book Plus (provided it was stored in the Archive file). You can select this command repeatedly to restore additional events.
Preferences ■ ■ Start/End Time. Defines the start and end times for Date Book Plus screens. If the time slots you select do not fit on one screen, you can tap the scroll arrows to scroll up and down. Event Duration. Defines the default duration for new events. Page 102 ■ Week Start. Defines the first day of the week. This setting overrides the System Preferences setting for all Date Book Plus views. ■ Initial View. Defines the view that appears when you start Date Book Plus. ■ Button Views.
Display Options ■ ■ ■ Show Time Bars. Activates the time bars that appear in the Day View. The time bars show the duration of an event and illustrate event conflicts Compress Day View. Controls how times appear in the Day View. When Compress Day View is off, all time slots display. When it is on, start and end times display for each event, but blank time slots toward the bottom of the screen disappear to minimize scrolling. Show PM Label. Displays a “p” after PM times. ■ Hide End Times.
Alarm Preferences Page 104 ■ Alarm Sound. Sets the tone of the alarm. ■ Snooze Sound. Sets the tone of the snooze alarm. ■ Remind Sound. Sets the tone of the reminder alarm. The reminder alarm sounds when the snooze alarm is not acknowledged. ■ Play Sound. Defines how many tones the alarm emits before it stops. The choices are Once, Twice, 3 Times, 5 Times, 10 Times, and 100 Times. ■ Repeat Alarm. Defines how many times the alarm repeats when it is not acknowledged.
To Do Preferences ■ Show Categories. Displays the To Do List items in the categories you select. ■ Priorities Displayed. Displays To Do List items with the selected priority level. The choices are 1 only, 1-2, 1-3, 1-4, and 1-5. ■ Show Priority. Displays the priority level for To Do List items. ■ Show Completed Items. Displays completed To Do List items. Go to Week Chapter 6 ■ Show Undated Items. Shows all To Do List items that have not been assigned a due date. ■ Show Dated Items.
Week Preferences Page 106 ■ Time Format. Defines the format of the time display. The choices are No Time, 11p, 11:30p, 23, 23:30. ■ Display To Do. Defines where To Do List items will appear on the Date Book Plus screen. The choices are Top, Bottom, and Hide. ■ Week Start. Defines the first day of the week for Week View with Text. ■ Wordwrap Single Entry. Wraps text in cells that contain a single event to display as much text as will fit in the cell. ■ Hide Untimed Floating Events.
Month Preferences ■ Show Timed Events. Displays events that you assigned to a specific time. ■ Show Untimed Events. Displays events that you assigned to a date, but did not assign to a specific time. ■ Show Daily Repeating Events. Displays events that repeat each day. Chapter 6 ■ Include Week Numbers in Title. Displays week numbers in the title bar for the first and last weeks in the month. ■ Show Zero Duration Events. Displays events that have no duration in the Month View display.
Year Preferences Page 108 ■ Hide Floating and Done Items. Removes floating events and completed To Do List items from the Year View display. ■ Hide Untimed Events. Removes untimed events from the Year View display. ■ Hide Zero Duration Events. Removes events without a duration from the Year View display. ■ Hide Events <. Removes events that are shorter than the time you specify from the Year View display. The choices are 0.5, 1, 2, 4, 8, and 12. ■ Hide Daily Repeating Events.
List View Preferences About Date Book+ Chapter 6 ■ Date Book. Determines which type of events appear in the List View display. The choices are: Appt, Float, Done, Alarms Only, and Repeat events only appear once. ■ To Do. Determines which type of To Do List items appear in the List View display. The choices are All, Not Complete, Complete, and None. If you choose either Not Complete or Complete, you also have the following choices: Dated & Undated, Dated only, and Undated only. ■ Filter by Text.
Address Book Address Book is the application in which you store name and address information about people or businesses. Creating an Address Book entry A record in Address Book is called an “entry.” You can create entries on your handheld, or you can use Palm Desktop software to create entries on your computer and then download the entries to your handheld with your next HotSync operation.
4. Use the Next Field Graffiti stroke to move to the First Name field. Next Field You can also move to any field by tapping it directly. Tip: 5. Enter the person's first name in the First Name field. 6. Enter the other information that you want to include in this entry. 7. Tap the scroll arrows to move to the next page of information. 8. After you finish entering information, tap Done.
3. Tap the pick list next to the label you want to change. Tap triangle 4. Select a new label. Changing Address Entry details The Address Entry Details dialog box provides a variety of options that you can associate with an entry. To open the Address Entry Details dialog box: 1. Tap the entry whose details you want to change. 2. Tap Edit. 3. Tap Details. 4. Select any of the following settings: Show in List Select which type of phone or other information appears in the Address List screen.
Address Book menus Address Book menus are shown here for your reference, and Address Book features that are not explained elsewhere in this guide are described here. See “Using menus” in Chapter 1 for information about choosing menu commands. The Record and Options menus differ depending on whether you’re displaying the Address List screen or the Address View screen. Record menus Address List Address View Options menus Address List Address View Preferences ■ Chapter 6 Remember last category.
Rename Custom Fields These custom fields appear at the end of the Address Edit screen. Rename them to identify the kind of information you enter in them. The names you give the custom fields appear in all entries. About Address Book Shows version information for Address Book.
To Do List A To Do List item is a reminder of some task that you have to complete. A record in To Do List is called an “item.” To create a To Do List item: 1. Press the To Do List application button handheld to display the To Do List. on the front of your 2. Tap New. New To Do item Tap New 3. Enter the text of the To Do List item. The text can be longer than one line. 4. Tap anywhere onscreen to deselect the To Do List item.
To set the priority of a To Do List item: 1. Tap the Priority number on the left side of the To Do List item. Tap here Tap to select priority 2. Tap the Priority number that you want to set (1 is most important). Checking off a To Do List item You can check off a To Do List item to indicate that you’ve completed it. You can set the To Do List to record the date that you complete the To Do List item, and you can choose to show or hide completed items. See “To Do Show Options” later in this chapter.
To display the To Do Item Details dialog box: 1. Tap the text of the item whose details you want to change. 2. Tap Details. Setting a due date You can associate a due date with any To Do List item. You can also sort the items that appear in the list based on their due date. To set a due date for a To Do List item: 1. In the Details dialog box, tap “No Date” to open the Due Date pick list. Tap here 2. Tap the date that you want to assign the item: Today Assigns the current date.
To Do Show Options The Show Options dialog box enables you to control the appearance of To Do List. To change the Show Options settings: 1. In To Do List, tap Show. 2. Select any of the following settings: Show Completed Items Displays your completed items in the To Do List. If you turn off this setting, your To Do items disappear from the list when you complete (check) them. Items that no longer appear on the list because you turn off this setting have not been deleted.
Show Due Dates Displays the due dates associated with items in the To Do List and displays an exclamation mark next to items that remain incomplete after the due date passes. Show Priorities Shows the priority setting for each item. Show Categories Shows the category for each item. 3. Tap OK. To Do List menus To Do List menus are shown here for your reference, and To Do List features that are not explained elsewhere in this guide are described here.
Memo Pad A memo can contain up to 4,000 characters. The number of memos you can store is dependent only on the memory available on your handheld. A record in Memo Pad is called a “memo.” To create a new memo: 1. Press the Memo Pad application button handheld to display the Memo List. on the front of your 2. Tap New. Tap New Tip: In the Memo List screen, you can also begin writing in the Graffiti writing area to create a new memo. The first letter is automatically capitalized and begins your new memo.
Reviewing memos The first line of a memo appears in the Memo List. This makes it easy to locate and review your memos. To review a memo: 1. In the Memo List, tap the text of the memo. Tap a memo to review its contents 2. Review or edit the text in the memo. 3. Tap Done. Memo Pad menus Memo Pad menus are shown here for your reference, and Memo Pad features that are not explained elsewhere in this guide are described here. See “Using menus” in Chapter 1 for information about choosing menu commands.
Options menus Memo List Memo screen Go to Top of Page Moves to the top (first) line of the memo. Go to Bottom of Page Moves to the bottom (last) line of the memo. Preferences Displays the Memo Preferences dialog box, where you define the sort order for memos. About Memo Pad Shows version information for Memo Pad.
Calculator Calculator includes two operating modes: Basic and Advanced. In Basic mode you can perform simple mathematical calculations. In Advanced mode you can access scientific functions and perform sophisticated math calculations. This section explains how to select the operating mode and use the buttons and menu options available in each mode. Selecting the Calculator mode The Change Mode dialog enables you to choose whether you want to work in Basic Calculator mode or Advanced Calculator mode.
Recalls the stored value from memory and inserts it in the current calculation. Clears any value that is stored in the Calculator memory. Displaying Recent Calculations The Basic Calculator’s Recent Calculations command enables you to review the last series of calculations and is particularly useful for confirming a series of “chain” calculations. To display recent calculations: 1. Tap the Menu icon . 2. Tap Options, and then tap Recent Calculations. 3.
Using the Advanced Calculator buttons In addition to most of the Basic Calculator buttons, the Primary buttons are available in all the Advanced Calculator views. The remaining buttons are available only in specific views. Primary buttons Clears the entire calculation and enables you to begin a fresh calculation. Clears the last digit you entered. Use this button if you make a mistake while entering a number in the middle of a calculation.
Calculates the inverse of x to the y power. Calculates the common (base 10) logarithm. Calculates the natural (base e) logarithm. Displays the remainder of x/y. Displays the decimal portion of a decimal value. Trigonometry buttons Calculates the sine of the current number. Calculates the cosine of the current number. Calculates the tangent of the current number. Calculates the hyperbolic sine of the current number. Calculates the hyperbolic cosine of the current number.
Finance buttons Finance buttons enable you to find an unknown variable value based on a group of known variable values. To solve a finance variable: 1. Enter a value and tap the corresponding button. 2. Repeat step 1 until you’ve entered four of the following five variables: N, APR, PV, Pmt, and FV. 3. Tap Edit. 4. Tap the variable you want to solve. Note: The variable line must be completely blank. Erase all values on the line including zero. 5. Tap Solve. 6. Tap Done.
Calculates the change in a value by a given percentage. To use this button, enter a value, tap this button, enter the percent, and then tap the equal sign button. Calculates the percentage of one number relative to another number. To use this button, enter the first number, tap this button, enter the second number, and then tap the equal sign button. Calculates the percentage required to get to one value from another value.
Statistics buttons Adds the current value to the end of the statistics memory list. You can store up to 200 values. Calculates the mean of the values in the statistics memory list. Calculates the standard deviation based on a population of n. Calculates the standard deviation based on a population of n-1. Calculates the sum of the values in the statistics memory list. Calculates the square of the sum of the values in the statistics memory list.
Indicates the current value is entered in tons. When you tap this button after tapping another unit of measure, it converts the value to tons. Indicates the current value is entered in milligrams. When you tap this button after tapping another unit of measure, it converts the value to milligrams. Indicates the current value is entered in grams. When you tap this button after tapping another unit of measure, it converts the value to grams. Indicates the current value is entered in kilograms.
Indicates the current value is entered in millimeters. When you tap this button after tapping another unit of measure, it converts the value to millimeters. Indicates the current value is entered in centimeters. When you tap this button after tapping another unit of measure, it converts the value to centimeters. Indicates the current value is entered in meters. When you tap this button after tapping another unit of measure, it converts the value to meters.
Indicates the current value is entered in square meters. When you tap this button after tapping another unit of measure, it converts the value to square meters. Indicates the current value is entered in hectares. When you tap this button after tapping another unit of measure, it converts the value to hectares. Indicates the current value is entered in square kilometers. When you tap this button after tapping another unit of measure, it converts the value to square kilometers.
Indicates the current value is entered in liters. When you tap this button after tapping another unit of measure, it converts the value to liters. Indicates the current value is entered in cubic inches. When you tap this button after tapping another unit of measure, it converts the value to cubic inches. Indicates the current value is entered in cubic feet. When you tap this button after tapping another unit of measure, it converts the value to cubic feet.
Calculator menus Calculator menus are shown here for your reference, and Calculator features that are not explained elsewhere in this guide are described here. See “Using menus” in Chapter 1 for information about choosing menu commands. Options menus Basic Calculator About Calculator Advanced Calculator Shows version information for Calculator. Program menu Advanced Calculator Export Opens the Export dialog box where you can select a view definition to export to Memo Pad.
CityTime CityTime enables you to display the day and time in your home city and in four other cities around the globe. Whether you’re travelling or at home, now it’s easy to keep track of the best time to reach your business associates, friends, and family in far away places. Setting your home city The home city serves as a point of reference for your other city selections. The information displayed for all the other cities is based on the day and time in your home city.
Selecting remote cities In addition to your home city, you can display the day and time for four other cities anywhere around the globe. These other cities are called remote cities. To set your remote cities: 1. Tap a pick list in the lower part of the CityTime screen and select the city closest to the city you want to display. Tap to select a remote city If a nearby city isn’t in the list, you can use the Edit Cities command to add a new city to the list.
CityTime menus CityTime menus are shown here for your reference, and CityTime features that are not explained elsewhere in this guide are described here. See “Using menus” in Chapter 1 for information about choosing menu commands. Options menu About CityTime Shows version information for CityTime. Help Displays online help for the CityTime screens. Utilities menu Change Location Opens the Change Location dialog box where you can select the city to which you are moving or travelling.
Expense Expense enables you to record the date, expense type, and the amount that you spent. A record in Expense is called an “item.” You can sort your Expense items into categories or add other information that you want to associate with the item. To create an Expense item: 1. Tap the Applications icon 2. Tap the Expense icon . . 3. Tap New.
Tip: A quick way to create a new Expense item is to make sure that no Expense item is selected in the Expense List, write the first letter(s) of the expense type, and then write the numerical amount. This technique takes advantage of the automatic fill feature. See “Options menu” later in this chapter for details. Changing the date of an Expense item Initially, Expense items appear with the date you enter them. You can use Expense to change the date associated with any Expense item.
3. Select any of the following options: Category See “Performing a HotSync operation for the first time” in Chapter 5. Type Opens a pick list of expense types. Payment Lets you choose the payment method used to pay the Expense item. If the item is prepaid (such as airline tickets supplied by your company), you can choose Prepaid to place your expense in the appropriate companypaid cell of your printed expense report spreadsheet.
Tap Edit currencies 2. Tap each Currency pick list and select the country whose currency you want to display on that line. 3. Tap OK to close the Select Currencies dialog box. 4. Tap OK. Defining a custom currency symbol If the currency you want to use is not in the list of countries, you can create your own custom country and currency symbol. To define a custom currency symbol: 1. Tap the Menu icon . 2. Tap Options, and then tap Custom Currencies. 3. Tap one of the four Country boxes.
5. Tap OK to close the Currency Properties dialog box. 6. Tap OK. Note: If you want to use your custom currency symbol as the default for all Expense items, select the symbol in the Preferences dialog box. If you want to use your custom currency symbol only for a particular Expense item, select the symbol in the Receipt Details dialog box associated with that item. Show Options Show Options define the sort order and other settings that relate to your Expense items. To open the Show Options dialog box: 1.
Transferring your data to Microsoft Excel After you enter your expenses into the Expense application on your handheld, Palm Desktop software enables you to view and print the data with your Windows-based computer. For information on using Expense with a Macintosh, visit this web site: http://www.handspring.com Note: You need Microsoft Excel version 5.0 (or later) to view and print your Expense data using one of the provided templates. Microsoft Excel is not included with the Visor handheld package.
4. If you want to define an end date for the expense report, enter the date in the End Date box. Note: If you do not specify an end date, all expense entries for the selected categories appear — up to the date of the last HotSync operation. 5. Do one of the following: Click Print to display the expense report in the Print Preview window, and then click Print in the Microsoft Excel window to print your expense report. Click Create to display a Microsoft Excel spreadsheet containing your expense data.
If you want to streamline or customize your expense reports, you can change these templates. For example, you can add your company name to a template. See Appendix C for information on changing templates.
To view your expense data using a Microsoft Excel template: 1. Display your expense data in a Microsoft Excel spreadsheet as described in the previous procedure. 2. Click Options. Enter name and other information Choose expense template 3. Enter name, department, and other information as necessary for your expense report. 4. Click the Templates menu; then select an expense template.
Expense menus Expense menus are shown here for your reference, and Expense features that are not explained elsewhere in this guide are described here. See “Using menus” in Chapter 1 for information about choosing menu commands. Record menu Options menu Preferences About Expense Chapter 6 ■ Use automatic fill. Lets you select an expense type by writing the first letter of an expense type in the Graffiti writing area. For example, if you write the letter “T,” it enters the “Taxi” expense type.
Page 148 Application Specific Tasks
Chapter 7 Communicating Using Your Handheld The previous chapter described the features of your Visor handheld computer that help you stay organized. This chapter describes the features that help you stay connected. ■ Managing desktop E-Mail: Using your handheld, you can read, reply to, compose, and delete e-mail from your desktop E-Mail application while you’re away from your desk.
In Mail, you can do the following: ■ View, delete, file, and reply to incoming mail. ■ Create outgoing e-mail items and drafts of e-mail items. ■ Create simple or complex filters, which allow you to decide the type of e-mail that your handheld retrieves from your desktop E-mail application. ■ Use your handheld in its cradle to send and retrieve e-mail items from your desktop E-Mail application.
To select HotSync options: 1. Click the HotSync icon in the Windows system tray (bottomright corner of the taskbar). 2. Choose Custom. Tip: You can also choose Custom from the HotSync menu in Palm Desktop software. 3. Select Mail in the list box. 4. Click Change. 5. Click one of the following settings: Synchronize the files Synchronizes the mail on your handheld and your desktop E-Mail application.
Tip: To turn off Mail, select Do Nothing and then select the Set As Default check box. To change your Mail setup options: 1. Click the HotSync icon in the Windows system tray. 2. Choose Custom. Tip: You can also choose Custom from the HotSync menu in Palm Desktop software. 3. Select Mail in the list box. 4. Click Change. 5. Modify your settings as needed. 6. Click OK.
To open an e-mail item: ■ Tap an e-mail item to open it. Header mode icons Recipient Subject Sender Time and date sent E-mail body To close an e-mail item: ■ Tap Done to close the e-mail item. Displaying full header information By default, Mail displays abbreviated header information, which comprises only the From: and Subj: fields. The full header provides complete information about the sender, receiver, and copied recipients, in addition to the subject and date the e-mail item was created.
To create an e-mail item: 1. Tap New. Tap New Tip: You can also create an e-mail item by tapping New from the Message menu. 2. Enter the e-mail address of the recipient. Note: Enter the address as if you were entering it from your desktop E-Mail application. For example, network users sending an e-mail item to a user on the same network do not need to add Internet information, such as @mycorp.com. 3.
Tip: If the address, CC, subject, or body exceeds the capacity of the screen display, tap the name of the field (for example, tap “To:”) to expand that field. Tap the Done button to return to the New Message screen. Tap the name of the field to open Tap to return to New Message screen To reply to an e-mail item: 1. Tap an e-mail item in the Message List to display it onscreen. 2. Tap Reply. 3.
Looking up an address To identify the recipient of an e-mail item, you need to enter that person’s e-mail address. You can do this either by entering the data directly into the field or by using the Look Up command to access the information in your Address Book. To look up an e-mail address: 1. Tap either the To: or CC: field name to expand it. 2. Enter the first few letters of the last name of the person whose address you want to find. 3. Tap Lookup. 4.
Tap to select Tap here to enter address in field Adding details to e-mail items Before you send your e-mail item, you can attach additional attributes to it, such as a signature or a priority level. These features are dependent on the desktop E-mail application you use. If your application does not support the attribute you select, your handheld cannot attach that attribute to the e-mail item. The following details are available: Priority Flags an e-mail item as High, Normal, or Low priority.
Setting a priority To set a priority for your e-mail item: 1. In the New Message screen, tap Details. Tap here 2. Tap the Priority pick list and select the priority you want. Tap here Tap to select priority 3. Tap OK. Tip: Your handheld can flag e-mail items with a specific priority only if your desktop E-Mail application supports this feature. Sending a blind carbon copy To add a BCC field to your e-mail item: 1. In the New Message screen, tap Details. 2. Tap the BCC check box to select it. 3.
BCC field 4. Tap the BCC: field and enter an address. Adding a signature to your e-mail item A signature consists of information about yourself that is appended to your e-mail item as its closing. For example, a signature can contain your name, address, phone and fax numbers, and any other text you want to include. By defining such information as a signature, you save yourself the trouble of having to enter it every time you create an e-mail item. Adding a signature to your message is a two-part process.
To add a signature to your e-mail item: 1. In the New Message screen, tap Details. 2. Tap the Signature check box to select it and add your signature to the e-mail item. Note: The check box stays selected, so all subsequent e-mail items you create will also contain your signature until you deselect the Signature option. 3. Tap OK. Note: The signature does not display in your e-mail item; only your recipient sees the signature.
To retrieve an e-mail item: 1. In the Message List, tap Outbox from the pick list in the upperright corner. Tap here to display folder 2. Tap the e-mail item you want to retrieve. Tap here to select item Tap to edit item 3. Tap Edit. Draft e-mail Sometimes you may not want to send an e-mail item immediately; for example, you may want to add additional information before sending it. Your handheld stores such e-mail items in the Draft folder until you are ready to edit them again.
To save an e-mail item as a draft: 1. Create an e-mail item. 2. Tap the Menu icon . 3. Tap Message, and then tap Save Draft. To edit an e-mail item saved as a draft: 1. In the Message List, tap Draft from the pick list in the upper-right corner. 2. Tap the draft you want to display. Tap here to select item Tap to edit item 3. Tap Edit. 4. Enter your changes; then either save the e-mail item again as a draft, or tap Send to move the item to your Outbox folder.
To remove e-mail from the Filed folder: 1. In the Message List, tap Filed from the pick list in the upper-right corner. 2. Tap the e-mail item you want to restore. 3. Tap Edit to display and modify the item. Tip: After you display and modify the e-mail item, you can send it, save it as a draft, or return it to the Filed folder. Deleting e-mail Your handheld stores deleted e-mail in the Deleted folder until you perform the next HotSync operation.
Purging deleted e-mail Because your handheld stores deleted e-mail in the Deleted folder until you perform a HotSync operation, deleted e-mail can monopolize storage space. To avoid or correct this problem, purge the contents of your Deleted folder. E-mail that you purge is still deleted from your desktop E-Mail application when you perform the next HotSync operation. To purge the contents of the Deleted folder: 1. Tap the Menu icon . 2. Tap Message, and then tap Purge Deleted. 3. Tap Yes.
Date column The Date column is optional in the Message List. By default, the Date column is hidden to increase the available screen space. To show the Date column: 1. In the Message List, tap Show. Tap Show 2. Tap the Show Date check box to select it. 3. Tap OK. Sorting the Message List You can sort e-mail items by the date sent, by sender, or by subject. Note: High-priority e-mail items always appear first, no matter how you sort the list. To sort the Message List: 1. In the Message List, tap Show. 2.
HotSync options HotSync options enable you to manage your e-mail more effectively by selecting which e-mail items download when you synchronize your computer and your handheld. You can define different settings for local and remote synchronization. For example, you may want to download all of your e-mail during local synchronization and only urgent e-mail during remote synchronization.
Filter During synchronization, all e-mail items in your handheld Outbox are sent to your desktop E-Mail application, and items in your desktop E-Mail Inbox that meet specific criteria download to your handheld. When you select the Filter setting, the HotSync Options dialog box opens and displays additional filter settings. See “Creating special filters” later in this chapter.
To access the special filter settings: ■ Tap the Filter box in the HotSync Options dialog box. Tap here to display Filter options Ignoring or receiving e-mail The first step in establishing a special filter is to determine whether you want to ignore or retrieve e-mail that matches the information you specify.
Retrieve Only Msgs Containing Tells your handheld to include only the e-mail items that meet the criteria you define and to ignore all other e-mail items during synchronization. This filter has the potential to block more e-mail during synchronization because it downloads only one subset of e-mail. Defining filter strings E-mail items are filtered based on the information contained in their To:, From:, and Subj: fields.
To define a filter string: 1. Tap a header field in the HotSync Options dialog box. Tap here to insert cursor 2. Enter your filter string, using commas or spaces to separate the words. Do not add connectors, such as AND or OR, between words in a string. 3. If your string exceeds the length of the field, tap the name of the field to display the Notes screen for that header field. For more information about header field Notes screens, see “Creating e-mail items” earlier in this chapter.
2. Tap the Retrieve All High Priority check box to select it. Tap check box 3. Tap OK. Note: This setting is applicable only if your E-Mail application has the capacity to flag high-priority e-mail items. Truncating e-mail items The Truncate feature lets you set a point at which long e-mail items truncate when downloading to your handheld. By default, this Truncate value is 4,000 characters.
Mail menus Mail menus are shown here for your reference, and Mail features that are not explained elsewhere in this guide are described here. See “Using menus” in Chapter 1 for information about choosing menu commands. Message menus The Message menu varies depending on whether you are viewing an e-mail item, creating an e-mail item, or viewing the Message List. Message List New Message View Message Options menus The Options menu varies depending on whether you are creating or editing an e-mail item.
Beaming information Your Visor handheld is equipped with an IR (infrared) port that you can use to beam information to another Palm Computing platform device that’s close by and also has an IR port. The IR port is located on the side of the handheld, behind the small dark shield. You can beam the following information between Palm Computing platform devices: ■ The record currently displayed in Date Book, Address Book, To Do List, or Memo Pad Note: You cannot beam records from Date Book Plus.
the two devices must be clear of obstacles. Beaming distance to other Palm Computing platform devices may be different. 5. Wait for the Beam Status dialog box to indicate that the transfer is complete before you continue working on your handheld. To beam an application: 1. Open the Applications Launcher. 2. Tap the Menu icon . 3. Tap App, and then tap Beam. 4. Tap the application you want to transfer. Note: Some applications are copy-protected and cannot be beamed.
Tips on beaming information ■ You can press the Address Book application button two seconds to beam your business card. ■ You can set the full-screen pen stroke to beam the current entry. See “Pen preferences” in Chapter 9 for more information. ■ You can use the Graffiti Command stroke /B to beam the current entry.
Page 176 Communicating Using Your Handheld
Chapter 8 Advanced HotSync® Operations HotSync® technology enables you to synchronize data between one or more Palm Computing® platform devices and Palm™ Desktop software or another PIM such as Microsoft Outlook. To synchronize data, you must connect your Visor handheld and Palm Desktop software either directly, by placing your handheld in the cradle attached to your computer, or indirectly, with a modem or network.
Always available Adds HotSync Manager to the Startup folder and constantly monitors the communication port for synchronization requests from your handheld. With this option, the HotSync Manager synchronizes data even when Palm Desktop software is not running. Available only when Palm Desktop software is running Starts HotSync Manager and monitors requests automatically when you open Palm Desktop software. Manual Monitors requests only when you select HotSync Manager from the Start menu.
Serial Port Identifies the port that Palm Desktop software uses to communicate with the optional serial cradle. This selection should match the number of the port to which you connected the optional cradle. Note: Your handheld cannot share this port with an internal modem or other device. Speed Determines the speed at which data is transferred between your handheld and Palm Desktop software. Try the As Fast As Possible rate first, and adjust downward if you experience problems.
Customizing HotSync application settings For each application, you can define a set of options that determines how records are handled during synchronization. These options are called a “conduit.” By default, a HotSync operation synchronizes all files between the handheld and Palm Desktop software. In general, you should leave the settings to synchronize all files.
6. Click the direction in which you want to write data, or click Do Nothing to skip data transfer for an application. Note: Changing the HotSync setting from the default affects only the next HotSync operation. Thereafter, the HotSync Actions revert to their default settings. To use a new setting on an ongoing basis, select the Set As Default box. Thereafter, whatever you selected as the default setting is used when you click the Default button in the Custom dialog. 7. Click OK. 8.
Conducting a HotSync operation via modem You can use a modem, such as the Springboard™ modem accessory, to synchronize your handheld when you are away from your computer. Note: The first HotSync operation must be local, using the cradle. After that, you can perform a modem HotSync operation.
Serial Port Identifies the port for the modem. If you are unsure of the port assignment, look at the Modem Properties in the Windows Control Panel. Speed Determines the speed at which data is transferred. Try the As Fast As Possible rate first, and adjust downward if you experience problems. This setting allows Palm Desktop software and your handheld to find and use the fastest speed. Modem Identifies the modem type or manufacturer. Refer to your modem manual or face plate for its type or settings.
To prepare your handheld for a modem HotSync operation: 1. Tap the Applications icon 2. Tap the HotSync icon . . 3. Tap the Enter Phone # field. Note: If you plan to connect to your company’s dial-in server (network modem) instead of connecting to a computer modem, see “Conducting a HotSync operation via a network” later in this chapter. 4. Enter the telephone number to access the modem connected to your computer. 5.
Selecting the conduits for a modem HotSync operation The Conduit Setup dialog box on your handheld enables you to define which files and/or applications synchronize during a modem HotSync operation. You can use these settings to minimize the time required to synchronize data with a Springboard modem accessory. To change the Conduit Setup for a modem HotSync operation: 1. Tap the Applications icon 2. Tap the HotSync icon 3. Tap the Menu icon . . . 4. Tap Options, and then tap Conduit Setup. 5.
Performing a HotSync operation via a modem After you prepare your computer and your handheld, and select your Conduit Setup options, you are ready to perform a modem HotSync operation. To perform a modem HotSync operation: 1. Tap the Applications icon 2. Tap the HotSync icon . . 3. Tap the Modem icon to dial the Palm Desktop modem and synchronize the applications. 4. Wait for the HotSync operation to finish. If you have any problems conducting a successful HotSync operation, see Appendix B.
To prepare your computer for a network HotSync operation: 1. Click the HotSync Manager icon in the Windows system tray (bottom-right corner of the taskbar). 2. From the HotSync Manager menu, choose Network. Note: To perform a Network HotSync from another computer on your network, you must select Network from the HotSync Manager menu on both your primary computer and the computer you want to use. 3. From the HotSync Manager menu, choose Setup. 4.
To prepare your handheld for a network HotSync operation: 1. Tap the Applications icon 2. Tap the HotSync icon 3. Tap the Menu icon . . . 4. Tap Options, then tap Modem Sync Prefs. 5. Tap Network. 6. Tap OK. Note: For more information on the Network HotSync feature, see the web site http://www.handspring.com. See “Network preferences and TCP/IP software” in Chapter 9 for information on configuring Network HotSync preferences.
Creating a user profile If you use the File Link feature to configure several Handspring, Inc. handheld computers with specific information (such as a company phone list) before distributing them to their actual users, you can create a user profile to load the data into an handheld without associating that data with a user name. The User Profile feature is designed only for the first-time HotSync operation, before you assign a User ID to a particular handheld. To create a user profile: 1.
To use a profile for the first-time HotSync operation: 1. Place the new handheld in the cradle. 2. Press the HotSync button on the cradle. 3. Click Profiles. 4. Select the profile that you want to load on the handheld, and click OK. 5. Click Yes to transfer all the profile data to the handheld. The next time you perform a HotSync operation, Palm Desktop software prompts you to assign a user name to the handheld.
Chapter 9 Setting Preferences for Your Handheld The Preferences screens enable you to customize the configuration options on your Visor handheld. In the Preferences screens, you can do the following: General Set the current date and time, the auto shut-off interval, the Beam Receive feature, and the system, alarm, and game sounds. Formats Set the country default and the formats for dates, times, calendar, and numbers.
Buttons preferences The Buttons Preferences screen enables you to associate different applications with the buttons on the front of the handheld. For example, if you find that you seldom use To Do List and often use Expense, you can assign the To Do List button to start Expense. Any changes you make in the Buttons Preferences screen become effective immediately; you do not have to change to a different screen or application.
Drag to top of screen To change the Pen preferences: 1. Tap Pen. 2. Tap the pick list and select one of the following settings for the fullscreen pen stroke: Backlight Turns on the backlight of your handheld. Keyboard Opens the onscreen keyboard for entering text characters. Graffiti Help Opens a series of screens that show the complete Graffiti character set. Turn Off & Lock Turns off and locks the handheld. You must assign a password to lock the handheld.
HotSync buttons preferences The Buttons Preferences screen also enables you to associate different applications with the HotSync button on the cradle and the HotSync button on the optional Springboard modem. Any changes that you make in the HotSync Buttons dialog box become effective immediately; you do not have to change to a different screen or application. To change the HotSync buttons preferences: 1. Tap HotSync. 2. Tap the pick list next to the button you want to assign.
Country default The country default sets date, time, week start day, and number conventions based on geographic regions where you might use your handheld. For example, in the United Kingdom, time often is expressed using a 24-hour clock. In the United States, time is expressed using a 12-hour clock with an AM or PM suffix. All your handheld applications use the Country default settings. You can, however, customize your own preferences.
General preferences The General Preferences screen enables you to set the time, date, auto shutoff interval, and sounds for your handheld. See Chapter 1 for information on setting the time and date. Auto-off delay Your handheld has an automatic shutoff feature that turns off the power and backlight after a period of inactivity. This feature helps conserve battery power in case you forget to turn off your handheld.
System, alarm, and game sounds Your handheld uses a variety of sounds. The System, Alarm, and Game Sound settings enable you to turn the sounds on or off, and to adjust the volume level. To set the system and alarm sounds: 1. Tap the System Sound pick list and select the sound level. Note: When you turn off the System Sounds, you also turn off the “chime” tones associated with the HotSync operation. 2. Tap the Alarm Sound pick list and select the sound level. 3.
Modem preferences The Modem Preferences screen enables you to define the settings for a modem that is directly connected to your handheld. These settings are for applications that activate and use the modem. Note: You can purchase a Springboard modem for use with your handheld. See http://www.handspring.com. To define the Modem preferences: 1. Tap TouchTone or Rotary. Note: Select the Rotary setting only if you are certain that your telephone service does not support TouchTone dialing. 2.
Network preferences and TCP/IP software The Network Preferences settings enable you to use the TCP/IP software that is included in the handheld operating system. You can use the TCP/IP software to connect with Internet Service Providers (ISPs) or dial-in (remote access) servers. Because the TCP/IP software is a feature of the operating system, you configure all parameters relating to it from the Preferences application.
To select a service: 1. Tap the Service pick list. Tap here to display a list of service templates 2. Tap the predefined service template you want to use. Entering a user name The User Name setting identifies the name you use when you log into your Internet Service Provider or your dial-in server. Although this field can contain multiple lines of text, only two lines appear onscreen. To enter a user name: 1. Tap the User Name field. 2. Enter your user name.
Entering a password The Password box identifies the password you use to log into your server or ISP. Your entry in this field determines whether your handheld prompts you to enter a password each time you log into your network: ■ If you do not enter a password, your handheld displays the word “Prompt” in this field and asks you to enter a password during the login procedure.
Adding telephone settings When you select the Phone field, your handheld opens a dialog box in which you define the telephone number you use to connect with your ISP or dial-in server. In addition, you can also define a prefix, disable Call Waiting, and give special instructions for using a calling card. Note: The Phone Setup dialog box works correctly for AT&T and Sprint long-distance services.
To enter a prefix: 1. Tap the Dial Prefix check box to select it. Select this box if you need to use a prefix Enter your prefix here 2. Enter the prefix. 3. Tap OK. Disabling Call Waiting Call Waiting can cause your session to terminate if you receive a call while you are connected. If your telephone has Call Waiting, you need to disable this feature before logging into your ISP or dial-in server. To disable Call Waiting: 1. Tap the Disable call waiting check box to select it.
Using a calling card The Use calling card field enables you to use your calling card when dialing your ISP or Intranet server. Keep in mind that there is usually a delay before you enter your calling card number. When you define your calling card number, you need to add commas at the beginning to compensate for this delay. Each comma delays transmission of your calling card number for two seconds. To use a calling card: 1. Tap the Use calling card check box to select it.
Connecting to your service After you set your Modem and Network Preferences, establishing a connection to your Internet Service Provider (ISP) or your company’s network (dial-in server) is easy. Note: If you are connecting to an ISP, you need a third-party application, such as a web browser or news reader, to take advantage of this connection. For information about thirdparty applications that support TCP/IP, check the web site http://www.handspring.com.
Adding detailed information to a service template If you are using one of the predefined service templates, you probably only need to enter your user name and telephone number. If you are creating a new service template, you may need to provide additional information to your ISP or dial-in server. You use the Details dialog box to add additional information to a selected service template. To select a connection type: 1. Tap the service field. 2. Tap Details. Select connection type 3.
Immediate Drops the connection to your ISP immediately when you switch to another application. 1 minute Waits one minute for you to open another application before it drops the connection. 2 minutes Waits two minutes. 3 minutes Waits three minutes. Power Off Keeps your PPP or SLIP connection until you turn off your handheld (or until it times out). This option works best with the Springboard modem. 2. Tap OK.
IP address Everyone who logs on to the Internet needs to have a unique identifier (an IP address), whether permanent or temporary. Some networks dynamically assign a temporary IP address when clients log in. The IP Address field lets you identify whether your network provides automatic (dynamic) temporary IP addressing. Note: If your IP address is permanently assigned, you need to get that information from your System Administrator. If you are not sure, select Automatic.
Creating a login script A login script is a series of commands, similar to an autoexec.bat file, that automates logging into your ISP. You can create login script files by selecting commands from the Command pick list in the Login Script dialog. Some commands from the Command pick list, such as Send, require you to supply additional information. Those commands have a parameter field so that you can add the necessary data. Note: You can also use non-ASCII and literal characters in your login script.
Send User ID Transmits the User ID information entered in the User ID field of the Network Preferences screen. Send Password Transmits the password entered in the Password field of the Network Preferences screen. If you did not enter a password, this command prompts you to enter one. The Password command is usually followed by a Send CR command. Delay Tells your handheld to wait a specific number of seconds before executing the next command in the login script.
Network preferences menu commands The Network Preferences screen includes menu commands to make it fast and easy to create and edit service templates. TCP/IP application menus are show here for your reference. See “Using menus” in Chapter 1 for more information about choosing menu commands. Service menu Options menu TCP/IP troubleshooting If you are having a problem establishing a network connection using TCP/IP, check this section and try the suggestions listed.
To view the Network Log: 1. Tap Options, and then tap View Log. 2. Tap the up and down arrows of the scroll bar to see the entire Network Log. 3. Tap Done. Adding a DNS number If your ISP or dial-in server requires a DNS number and you did not enter that information in the Network Preferences screen, it will appear that you successfully logged into your network. When you try to use an application or look up information, however, the connection fails. If this occurs, try adding a DNS number.
Owner preferences The Owner Preferences screen enables you to record a name, company name, phone number, or any other information that you want to associate with your handheld. If you use the Security application to turn off and lock your handheld with a password, information that you put in the Owner Preferences displays the next time you turn on your handheld. See Chapter 1 for more information.
ShortCuts preferences The ShortCuts Preferences screen enables you to define abbreviations for entering text with Graffiti strokes. This section describes how to create, edit, and delete a ShortCut. See Chapter 2 for more information on the use of ShortCuts. Creating a ShortCut You can create a ShortCut for any words, letters, or numbers. All ShortCuts you create appear on the list in the ShortCut Preferences screen.
ShortCut Editing a ShortCut After you create a ShortCut, you can modify it at any time. To edit a ShortCut: 1. Tap the ShortCut you want to edit. 2. Tap Edit. 3. Make the changes you want and tap OK. Deleting a ShortCut If you no longer need a ShortCut, you can delete it from the list of ShortCuts. To delete a ShortCut: 1. Tap the ShortCut you want to delete. 2. Tap Delete. 3. Tap Yes.
Page 216 Setting Preferences for Your Handheld
Appendix A Maintaining Your Handheld This chapter provides information on the following: ■ Proper care of your handheld ■ Prolonging battery life ■ Resetting your handheld Caring for your handheld Your handheld is designed to be rugged and reliable and to provide years of trouble-free service. Please observe the following general tips when using your handheld: ■ Take care not to scratch the screen of your handheld. Keep the screen clean.
Battery considerations Please note the following considerations when replacing the batteries in your handheld: ■ Under normal conditions, your handheld batteries should provide several months of use. You can conserve battery life by minimizing the use of the backlight feature, and changing the Auto-off setting that automatically turns the handheld off after a period of inactivity. See “General preferences” in Chapter 9 for more information.
Resetting your handheld Under normal circumstances, you will not have to use the reset button. On rare occasions, however, your handheld may no longer respond to buttons or the screen. In this case, you need to perform a reset to get your handheld running again. Performing a soft reset A soft reset tells your handheld to stop what it’s doing and start over again. All records and entries stored in your handheld are retained with a soft reset.
Performing a hard reset With a hard reset, all records and entries stored in your handheld are erased. Never perform a hard reset unless a soft reset does not solve your problem. Note: You can restore any data previously synchronized with your computer during the next HotSync operation. To perform a hard reset: 1. Hold down the power button on the front panel of the handheld. 2.
3. Select the appropriate user name from the list. 4. Select an application in the Conduit list. 5. Click Change. 6. Select Desktop overwrites handheld. Note: Changing the HotSync setting from the default affects only the next HotSync operation. Thereafter, the HotSync Actions revert to their default settings. 7. Click OK. 8. Repeat steps 4 through 7 to change conduit settings for other applications. 9. Click Done to activate your settings. 10. Perform a HotSync operation.
Page 222 Maintaining Your Handheld
Appendix B Troubleshooting Tips If you encounter a problem with your Visor handheld: ■ Review this section to see if your problem is listed ■ Check our web site at http://www.handspring.com for the latest technical support information Note: Thousands of third-party add-on applications have been written for the Palm Computing® platform. Unfortunately, we are not able to support such a large number of third-party applications.
I replaced the batteries, but I am still getting a low battery warning. The battery warning message may appear immediately after replacing the batteries. Also, if you check the battery gauge in the Applications Launcher immediately after replacing the batteries, the gauge may start at “empty” and slowly rise to “full.” This is normal. It takes a few minutes for the battery gauge to accurately show the condition of the batteries. I get a warning message telling me my handheld memory is full.
Tapping and writing problems Problem Solution When I tap the buttons or screen icons, it activates the wrong feature. Calibrate the screen. See “Digitizer preferences” in Chapter 9. When I tap the Menu Not all applications or screens have menus. Try changing to a different application. icon , nothing happens. I can’t get my handheld to recognize my handwriting. Appendix B ■ For your handheld to recognize handwriting input with the stylus, you need to use Graffiti® writing.
Application problems Problem Solution I tapped the Today button, but it does not show the correct date. Your handheld is not set to the current date. Make sure the Set Date box in the General Preferences screen displays the current date. See “General preferences” in Chapter 9 for more information. I know I entered some records, but they do not appear in the application. ■ Check the Categories pick list (upperright corner of the screen). Choose All to display all of the records for the application.
HotSync problems Problem Solution I cannot do a HotSync operation; what should I check to make sure I am doing it correctly? ■ Check the Windows system tray to make sure the HotSync Manager is running. If it is not, open Palm Desktop software. ■ Click the HotSync Manager and make sure that the Local USB option has a check next to it.
I am using Outlook as my PIM, but I cannot do a HotSync operation. ■ Click the HotSync Manager and choose Custom. Check that the correct conduit is active. ■ Check that the correct conduit is installed. Reinstall the HotSync Manager and make sure the correct conduit is selected. I tried to do a local HotSync operation, but it did not complete successfully. Try each of these in turn: Page 228 ■ Make sure HotSync Manager is running. If HotSync Manager is running, exit and restart it.
I tried to do a local HotSync operation, but it did not complete successfully. (continued) I tried to do a modem HotSync operation, but it did not complete successfully. ■ ■ ■ Perform a soft reset. See “Resetting your handheld” in Appendix A. Check the following on your computer: ■ Make sure your computer is turned on and that it does not shut down automatically as part of an energysaving feature.
I tried to do a modem HotSync operation, but it did not complete successfully. (continued) Check the following on your computer: (continued) ■ Make sure you are not running another program, such as WinFax, CompuServe, or America Online, that uses the serial port you selected in the Setup dialog box. ■ Make sure your modem resets before you try again. (Turn off your modem, wait a minute, then turn it back on.
Beaming problems Problem Solution I cannot beam data to another Handspring, Inc. handheld computer. ■ Confirm that your handheld and the other Visor handheld are between ten centimeters (approximately 4") and one meter (approximately 39") apart, and that the path between the two devices is clear of obstacles. Beaming distance to other handheld computers based on the Palm Computing platform may be different. ■ Move your handheld closer to the receiving device. ■ Perform a soft reset.
Password problems Problem Solution I forgot the password, and my handheld is not locked. You can use Security to delete the password. If you do this, your handheld deletes all entries marked as private. You can, however, perform a HotSync operation before you delete the password: the HotSync process backs up all entries, whether or not they are marked private. In this case, the following procedure restores your private entries and lets you access them: 1.
Technical support If you cannot solve your problem after reviewing the sources listed at the beginning of this appendix, check our web site http://www.handspring.com for the latest technical support information. Before requesting support, please experiment a bit to reproduce and isolate the problem.
Page 234 Troubleshooting Tips
Appendix C Creating a Custom Expense Report This section explains how to modify existing Expense application templates and how to create your own custom expense report templates for use with the Expense application. Note: This section assumes that you are familiar with Microsoft Excel or a similar spreadsheet application. If you are not familiar with Microsoft Excel, consult your company’s Information Services department or another experienced user.
Customizing existing sample templates Four sample Expense Report templates come with Palm Desktop software. These templates are stored in the Template folder (which is in the same folder as the Palm Desktop software application). If the layout of one (or more) of these templates is appropriate for your reporting needs, you can easily customize the templates with your company name and other information. To customize a sample Expense Report template: 1.
4. From the File menu, choose Save As. 5. Click the Save as type drop-down list and choose Template (*.xlt). 6. Navigate to the Template folder (in the Palm Desktop software directory). Note: If you do not need to change the Maptable.xls file, save the template file with its original file name (e.g., Sample2.xlt). If you do need to change the Maptable.xls file, give your modified template a unique name. Be sure to use the .xlt file suffix, which defines the file as a Microsoft Excel template. 7.
Sections A Section is an area of the report that has common formatting. It is common for an Expense report to have more than one Section. For example, the following sample Expense Report named Sample3.xlt contains several Sections. Section 1 (not prepaid) Section 2 (prepaid) Section 3 Because your Expense data maps to row and column areas of your final report, different Sections require different definitions for the data mapping.
Analyzing your custom Expense Report If you already have a custom Excel expense report, you can use it with a modified mapping table. However, before you can create a Maptable.xls file that corresponds to your custom Expense Report, you must first analyze the characteristics of your report. Perform the following before you begin a custom mapping table: ■ Print a copy of your custom expense report. Activate the Row and Column Headings option in the Sheet settings of the Page Setup command.
Programming the mapping table Once you have analyzed the components of your custom Expense Report, you can program the mapping table to fill the report with data from the handheld. To program a new custom mapping table: 1. Open a copy of the Maptable.xls file in Microsoft Excel. Note: This file is located in the same folder as the Palm Desktop software application. Make a backup copy of this file before you make your modifications. 2. Mapping a new template.
5. Scroll down to a blank area of the Maptable.xls file (below the rows used for Sample4.xlt), and click on a row number to select a blank row. 6. From the Edit menu, choose Paste. A copy of the rows you selected in step 3 is pasted into the Maptable.xls file. 7. Name the table. In the cell immediately to the right of the cell entitled Template Name, enter the exact file name of your custom Expense Report template. 8. Define the number of Sections.
10. Define the dimensions of the Section. The dimensions of the Section appear in the green columns (10–13). # of Rows Represents the total number of rows in the Section, excluding any header or total rows. In other words, this includes only the number of rows in the Section where your handheld data will be placed. # of Columns Represents the total number of columns in the Section, excluding any header or total columns.
12. Define whether the Section is in list format. This setting appears in the light purple columns (18–19). If the Section will present the data in a list format, enter the word “yes”. Otherwise, enter the word “no”. The following diagram shows data presented in a list format: Only if your section is in list format: In the Expense Type cell, enter the number of the row or column where the expense description will be placed.
15. Mark a Section for prepaid expenses (yellow column). If a row in the map table is for prepaid (company paid) expenses, type a “yes” in the cell on that Section’s row. Type “no” in all the cells of this column that do not pertain to prepaid expenses. 16. Repeat steps 9 through 15 for each Section that you have defined for your custom Expense Report. 17. Map Expense Report Options dialog (magenta section).
Expense file details The Expense.txt file contains four groups of data. It will be easier to see these four distinct groups of data if you open the file with a spreadsheet application. Trips Shows the number of Expense application categories, and lists each one followed by an “end” statement. Currency Shows how many currencies were used for the Expense data, and lists the countries that correspond to that currency. Trip Shows the number of expenses by category, and lists the expenses for each category.
Page 246 Creating a Custom Expense Report
Appendix D Non-ASCII Characters for Login Scripts The following information enables you to create custom login scripts that require non-ASCII characters. It is provided for advanced users who understand the use and requirements of such characters in a custom login script. Use of ^char You may use the caret ( ^ ) to transmit ASCII command characters. If you send ^char, and the ASCII value of char is between @ and _, then the character is automatically translated to a single-byte value between 0 and 31.
Literal characters The backslash ( \ ) character defines that the next character is transmitted as a literal character, and is not subject to any special processing ordinarily associated with that character.
Warranty and Other Product Information Handspring, Inc. Limited Warranty HARDWARE: Handspring, Inc. (“Handspring”), warrants to the original end user (“Customer”) that this product will be free from defects in workmanship and materials, under normal intended use, for one year from the date of original purchase from Handspring.
Products or parts shipped by Customer to Handspring must be sent prepaid and packaged appropriately for safe shipment, and it is recommended that they be insured or sent by a method that provides for tracking of the package.
NOTICE TO CONSUMERS: Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to you. When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty.
Handspring, Inc. End User Software License Agreement THIS PRODUCT CONTAINS SOFTWARE, THE USE OF WHICH IS LICENSED BY HANDSPRING, INC. AND ITS SUPPLIERS (COLLECTIVELY, “HANDSPRING”), TO ITS CUSTOMERS FOR THEIR USE ONLY AS SET FORTH BELOW. SOFTWARE LICENSE: Handspring grants you a nonexclusive license to use the accompanying software program(s) (the “Software”) subject to the terms and restrictions set forth in this End User Software License Agreement (“License Agreement”).
EXPORT RESTRICTIONS: You agree that you will not export or re-export the Software or accompanying documentation (or any copies thereof) or any products utilizing the Software or such documentation in violation of any applicable laws or regulations of the United States or the country in which you obtained them. The software covered by this License Agreement may contain strong data encryption code which cannot be exported outside of the U.S. or Canada.
GNU Library General Public License Version 2, June 1991 Copyright (C) 1991 Free Software Foundation, Inc. 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the library GPL. It is numbered 2 because it goes with version 2 of the ordinary GPL.] PREAMBLE: The licenses for most software are designed to take away your freedom to share and change it.
The reason we have a separate public license for some libraries is that they blur the distinction we usually make between modifying or adding to a program and simply using it. Linking a program with a library, without changing the library, is in some sense simply using the library, and is analogous to running a utility program or application program.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
c) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. d) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable from it.
through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
16.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Acknowledgments We would like to thank the following developers whose contributions were an integral part of the Handspring product: ■ C.E. Steuart Dewar Pimlico Software, Inc. www.gorilla-haven.org/pimlico ■ Darren Beck Code City www.codecity.com.au ■ Rick Huebner www.probe.net/~rhuebner/index.
Index A ABA (Address Book archive file) 35 Accented characters Graffiti writing 32 onscreen keyboard 34 Add-on applications 40–43 Address Book *If Found Call* entry 111 adding custom fields 114 archive files (.
Birthdays.
Cradle connecting to computer 9, 22 for local HotSync operations 62 serial 4, 22, 179, 227, 228 USB 4, 22 Creating Address Book entries 110–111 categories 37–38, 66 currency symbols 141 custom fields in Address Book 114 Date Book events 80 e-mail 153–155 Expense items 138 expense reports in Excel 143–146 memos 120 notes for records 76 records 57 To Do List items 115 Currency default 147 defining 141 for Expense items 140 Current date 21, 226 Current time 13 displaying in Date Book 87 setting 20 Customizing
Dates Expense item 139 setting current 21, 226 showing in Mail list 165 To Do List record due 117 Day (Date Book view) 80, 91, 103 DBA (Date Book archive file) 35 Decimal point 195 Default categories 64 currency in Expense 147 settings.
numbers 29 online Help 59, 192 problems using 225 punctuation marks 30 ShortCuts for entering data 33, 214–215 symbols 31 tips 27 writing 25–34 writing area 6, 26 reports in Excel 143–146, 235–245 sorting records 73 templates for reports 144 type 140, 147 vendor 140 F FCC Statement 261 Files, linking to external 188 Filing e-mail 162 Filters for e-mail 167–171 Finding applications, using Graffiti writing 14 e-mail addresses 156–157 information in applications 68–72 phone numbers 70–71 using the Find appli
I Icons alarm 84 application 12, 38 note 76 online Tips 16 onscreen 225 repeating event 86 Idle timeout of ISP or server connection 206 Ignoring e-mail. See Filters for e-mail Importing data 19, 35–36 Inbox 164 Infrared port. See IR port Installing applications 40–42 batteries 10 conduit to install applications 180 Desktop software 22–23, 223 Mail.
recovering deleted 163 replying to e-mail 155 sending 160 showing dates 165 signature 157, 159–160 sorting 165 synchronizing 152 truncating 171 viewing e-mail 152 Main applications 13 Maintenance information 217 Meetings. See Date Book Memo Pad adding Address Book data to records 70–71 archive files (.
O 1-2-3, for expense reports 244 Onscreen keyboard 17, 34, 59 pen stroke to open 193 Opening Address Book 50 applications 13–14 Calculator 53, 123 CityTime 54 Date Book 48 Date Book Plus 49 Expense 55 Mail 152 Memo Pad 52 To Do List 51 Organizer (Lotus PIM) 35 Outbox 160, 164 Outlook, connecting to 228 Overlapping events 89 Owner preferences 213 P Palm Desktop software.
Q Quattro Pro, for expense reports 244 R Range of times in Day view 92, 102 Reading e-mail on handheld 152 Receipts, recording in Expense 139 Receiving data.
ShortCuts backing up 180 managing 214–215 menu commands 15 predefined 34 using 33 Showing dates in Mail list 165 Signature for e-mail 159–160 Soft reset 219 Sorting applications 38 e-mail items 165 records 73, 226 Sounds. See Alarm and System sounds Springboard expansion module 9, 24 Stand. See Cradle Standing Meetings.
Today. See Current date Tracking events 98 Transferring data. See HotSync Transmitting data. See Beaming information Truncating e-mail 171 Turning off handheld automatically 196 pen stroke for 193 problems with 224 Turning on handheld application buttons 7 displaying owner’s name 213 power button 7 problems with 223 U Undoing actions 59 Uninstalling Desktop software 43 Unresponsive handheld 224 Unsent e-mail, editing 160 Untimed events 80, 83, 85 Updating data.
