Treo™ 270 Communicator User Guide Macintosh Edition
Copyright Copyright © 2002 Handspring, Inc. All Rights Reserved. Handspring, Treo, and the Treo logo are trademarks of Handspring, Inc. and may be registered in some jurisdictions. Blazer and the Handspring logo are trademarks of Handspring Inc., are registered trademarks in the U.S.A., and may be registered in other jurisdictions. Portions copyright © 1998-2002 Palm, Inc. or its subsidiaries. All rights reserved.
Contents Introduction to Your Treo™ 270 Communicator . . . . . . . . . . . . . . . . . . . . . . . . . 11 Getting to know your communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 What is a Treo communicator? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Managing Your Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Using the Applications Launcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Opening applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Switching between applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Looking up Contacts records in PhoneBook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Using Find . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Using Phone Number Lookup . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Blazer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Viewing web pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Working with bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 Blazer menus . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Expense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 Changing the date of an Expense item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 Entering receipt details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 Customizing the Currency pick list . . . . . . . . . . . . . . . . . . . . . . . . . .
Ringer Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 ShortCuts Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 Creating a ShortCut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 Editing a ShortCut . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Call Forwarding Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Forwarding calls when your communicator is busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219 Forwarding calls that you do not answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220 Forwarding calls when your communicator is unreachable . . . . . . . . . . . . . . . . . . . . . . . . .220 General Commands . . . . . . . . . . . . . . . . . . . . .
Page 10 Contents
Chapter 1 Introduction to Your Treo™ 270 Communicator This chapter explains the physical buttons and controls on your Treo™ 270 communicator, how to use your communicator for the first time, and how to install Palm™ Desktop software and the HotSync® Manager synchronization software so you can synchronize your communicator and your computer.
System requirements To install and operate Palm Desktop software and the HotSync Manager synchronization software, your computer system must meet the following requirements: Minimum requirements ■ Mac OS 8.5 or later with USB port (for USB HotSync® cable) ■ Apple Macintosh or compatible computer with a PowerPC processor ■ 8 MB RAM (memory) minimum, 16 MB recommended ■ 25 MB available hard disk space ■ VGA monitor or better ■ CD-ROM drive (you can also download Palm Desktop software from www.
8. If you created a password on your old handheld, enter it on your new communicator. Note: Records you previously marked Private remain marked Private, but you need to reenter a password on your new communicator. 9. If you had any important settings on your old handheld, such as Network Preferences, manually copy them from your old handheld to your new communicator. Each device must have a unique name After you complete the upgrade process described above, you have two devices with the same name.
Speaker Functions as the earpiece on your Treo. Headset jack Enables you to connect a hands-free headset for use with the wireless features. Use only headsets that are compatible with your communicator. Rocker switch Enables you to navigate on your communicator with just one hand. You can use the rocker switch as an alternate method to perform a variety of tasks, such as adjusting the call volume level on your phone.
Locating top panel controls Antenna Power button IR port Stylus LED Ringer switch Antenna Receives and sends wireless communication signals. The antenna does not telescope out of your communicator. Stylus Serves as the instrument used to tap options on your communicator screen. To use the stylus, slide the stylus out of the slot, and hold it as you would a pen or pencil. Power button Turns your communicator and wireless mode on and off, and controls the keyboard backlight. See page 18 for details.
Locating back panel components Reset button SIM card door Charger and USB/serial connector SIM card door Secures your SIM (Subscriber Identity Module) card in your phone. Reset button Under normal use, you should not have to use the reset button. See Appendix A for information about when and how to use the reset button. Charger and USB/serial connector The connector that connects your communicator to the travel charger and HotSync cable.
Charging the battery To use your communicator, you must connect the travel charger or the HotSync cable and charge the battery. When you’re near your computer, connect your communicator to the HotSync cable with the travel charger connected to a wall outlet as shown in the section that begins on page 23. When travelling, connect the travel charger cable directly to your communicator as shown in this section.
Turning your Treo on and off Your Treo communicator has two operating modes: a handheld mode and a wireless mode. You can turn the handheld mode and the wireless mode on and off independent of each other. When you turn on the handheld mode, you can use organizer applications such as Date Book Plus and To Do List. When you turn on the wireless mode, you can make or receive calls. You can also turn both modes on at the same time.
Adjusting the display Depending on the lighting conditions or temperature of the environment where you use your communicator, you may need to adjust the brightness and color saturation of the display. The Adjust Display dialog box contains two sliders. The upper slider adjusts color saturation and the lower slider adjusts brightness. The display usually looks best at maximum brightness but you may want to decrease the brightness to conserve battery power. To adjust the display: 1. Press Option . 2.
Elements of the communicator interface Menu bar Pick list Check box Command buttons Menu bar A set of commands that are specific to the application. Not all applications have a menu bar. Command Tap a button to perform a command. Command buttons appear in dialog boxes buttons and at the bottom of application screens. Check box When a check mark appears in a check box, the corresponding option is active. If a check box is empty, tapping it inserts a check mark.
Moving around the screen You can move between entry fields, pick lists, check boxes, and other options by using the stylus, the scroll buttons, or the rocker switch. To move around the screen do one of the following: ■ Tap an item with the stylus. ■ Press the scroll buttons to scroll through the items on the screen. ■ Roll the rocker switch up or down to scroll through the items on the screen. Tip: To learn how to move around the screen using the Treo keyboard, see page 30.
The following procedures for setting the time and date give you an example of how to customize your communicator. You make changes to the time and date in General preferences. To set the current time: 1. Tap the Set Time box. Tap here 2. Tap the up or down arrows to change the hour. 3. Tap each minute number, and then tap the arrows to change them. 4. Tap AM or PM. Note: Your communicator can also display time based on a 24-hour clock. See page 172 for details. 5.
Using the headset You can connect a headset for hands-free operation. Your Treo is compatible with the included headset and other headsets listed at www.handspring.com. If you need to use your phone while driving and this is permitted in your area, we recommend using a headset. Note: Treo is not compatible with three-pin (also called three-pole) style headsets. You can determine whether a headset is a three-pin headset by counting the number of silver rings on the headset pin.
To connect the HotSync cable: 1. Connect the travel charger cable to the short end of the Hotsync cable. Be sure to match the sides of the connectors labeled “UP.” 2. Connect the USB HotSync cable to a USB port on your computer. 3. Connect the long end of the HotSync cable to your communicator with the button facing up. USB cable and port Note: If you are unsure about the exact location of the USB port on your computer, refer to the manual supplied with the computer. 4.
Palm Desktop software Your communicator comes with Palm Desktop software. Palm Desktop software includes many of the same applications as your communicator: Daily Calendar (Date Book Plus), Contact List (the Contacts view in PhoneBook), Task (To Do List), and Note (Memo Pad). The following instructions guide you through installing Palm Desktop software. After installation, refer to the online Help in Palm Desktop software for information about how to use the software.
One-Touch Mail One-Touch Mail is a wireless e-mail application that enables you to access your ISP (POP3 account) e-mail directly from your communicator. You may also be able to use One-Touch Mail to access your corporate e-mail; contact your System Administrator for assistance. To install One-Touch Mail, do one of the following: ■ Select the One-Touch Mail option when you configure the wireless communication features using the Handspring CD-ROM.
Chapter 2 Entering Data in Your Communicator This chapter explains how to enter data into your Treo™ 270 communicator using each of the following methods: ■ Using the communicator keyboard ■ Using the onscreen keyboard ■ Using your computer keyboard ■ Importing data Using the communicator keyboard The communicator keyboard is the primary method you’ll use to enter data into your communicator. Each letter key on the keyboard has three functions: Normal: Types a lowercase letter.
To type a single capital letter (Caps Shift): 1. Press Shift : When Caps Shift is active, an “up arrow” symbol appears in the lower-right corner of the Treo screen. If you accidentally activate Caps Shift, press Shift twice to cancel it, or if you do nothing for five seconds, it reverts to lowercase. Caps Shift 2. Type the letter you want to capitalize. To enter only capital letters (Caps Lock): 1. Press Shift twice.
Typing accented characters The ListType feature enables you to enter accented characters. You can enter the following accented letters: à á ä â ã å çè é ë ê ì í ï î ñ ò ó ö ô õ ù ú ü û ý ÿ To enter accented characters: 1. Type the letter (uppercase or lowercase) to which you want to add an accent. 2. Press ListType . 3. Use the scroll buttons to select the accent you want to apply. 4. Press Space Tip: to insert the accented character.
e T ~™†‡ + & E x × - _~•–— f ƒ X × / \÷¦ F ƒ y ¥ % ‰ l £ Y ¥ # = L £ 0 ‰º ( <[{‹ m µ 1 ¹¼½ ) >]}› M µ 2 ² o ø 3 ³ 3. Press ListType . 4. Use the scroll buttons to select the extended symbol you want to insert. 5. Press Space Tip: to insert the extended character. To enter a tab, press Shift and then press Space .
Using menus Menus on your communicator are easy to use. Once you have mastered them in one application, you can use them the same way in all other applications. The menus and menu commands that are available depend on the application. Also, the menus and menu commands vary depending on which part of the application you’re using. For example, in Memo Pad, the menus are different for the Memo list screen and the Memo edit screen.
To use keyboard shortcuts for menu commands: 1. Press Menu to open the menu bar. 2. Type the menu command shortcut letter. For example, to choose Copy in the Edit menu, press Menu Tip: followed by the letter “c.” When the menu bar is open, you can enter a shortcut letter for any menu item in the current application view, not just the ones that appear on the current menu. Using text ShortCuts ShortCuts make entering commonly used words or phrases quick and easy.
Using the onscreen keyboard You can open the onscreen keyboard anytime you need to enter text or numbers on your communicator. When used in conjunction with the backlight, the onscreen keyboard is especially useful for typing in the dark. To use the onscreen keyboard: 1. Open a record in an application that requires you to enter data (such as Memo Pad). 2. Press Menu . 3. Under Edit, select Keyboard (/K). 4. Tap the characters to enter text, numbers, and international characters.
Importing data If you have data stored in computer applications such as spreadsheets and databases, you can transfer the data to your Treo communicator without having to key it in manually. Save the data in one of the file formats listed below, import it into Palm Desktop software, and then perform a HotSync operation to transfer the data to your communicator. You can import data from any of the following PIM (personal information manager) products.
6. In the Import dialog box, check each field name to be sure the correct data moves into the correct fields. ■ To change the order of a field in the file you're importing into, move the pointer over a field name in the Fields In list. When the pointer changes to double arrow, drag the name to a new location. ■ To prevent information from being imported into a field, click the arrow between field names. The arrow changes to a dotted line.
Page 36 Entering Data in Your Communicator
Chapter 3 Managing Your Applications This chapter explains how to switch between applications on your Treo™ 270 communicator, how to change application settings so they are personalized to your work methods, and how to categorize applications so you view them in related groups. Using the Applications Launcher Your communicator is equipped with a variety of applications. All the applications installed on your communicator appear in the Applications Launcher.
Switching between applications When working in any application, press Option and then press Menu , or press an application button on the front panel of your communicator to switch to another application. Your communicator automatically saves your work in the current application and displays it when you return to that application. Categorizing applications The category feature enables you to manage the number of application icons that appear onscreen in the Applications Launcher.
Changing the Applications Launcher display By default, the Applications Launcher displays each application as an icon. As an alternative, you can choose to show a list of applications. You can also choose to view the same category of applications each time you open the Applications Launcher. To change the Applications Launcher display: 1. Press Option 2. Press Menu and then press Menu to access the Applications Launcher. again to open the menus. 3. Under Options, select Preferences(/R). 4.
Choosing preferences You can set options that affect an entire application in the application’s Preferences dialog box. To change preferences for an application: 1. Open an application. 2. Press Menu . 3. Under Options, select Preferences (/R). Note: Not all applications have a Preferences command. 4. Make changes to the settings. 5. Hold Option and press Return to finish.
Note: If the software you download is compressed, you need to decompress it into this folder. If you prefer to place the application into another folder, you need to navigate to that folder before you complete step 5. 2. Double-click the Palm Desktop icon on your desktop. 3. From the HotSync menu, choose Install Handheld Files. Tip: You can also access the Install Handheld Files dialog box by double-clicking any file with a PRC file extension. 4.
Note: Review the list of applications you selected in the Install Handheld Files dialog box. If you do not want to install an application, select it, and then click Remove From List. (This does not remove the application from your computer; it simply removes it from the list of applications to install.) 8. Close the Install Handheld Files dialog box. 9. Perform a HotSync operation to install the application(s) you selected in step 6. See the section that begins on page 74 for details.
Removing Palm Desktop software Removing Palm Desktop software also removes HotSync Manager. If you remove this software from your computer, you cannot synchronize your data. So, we highly recommend leaving Palm Desktop software on your computer. To remove Palm Desktop software: 1. Insert the Palm Desktop software CD-ROM into your computer’s CD-ROM drive. 2. Double-click the Handspring CD icon on the desktop. 3. Double-click the Installer icon. 4.
Assigning a password You can assign a password to protect your private records and to lock your communicator. To assign a password: 1. Press Option and then press Menu 2. Tap the Security icon to access the Applications Launcher. . 3. Tap the Password box. 4. Enter a password. 5. Hold Option and press Return . Tap here 6. Enter the same password a second time. 7. Hold Option and press Return to finish.
4. Do one of the following: ■ To change the password, enter the new password, and hold Option Return . ■ To delete the password, tap Delete. and press Locking your communicator You can also lock your communicator so that you need to enter your password to operate it. Important: If you lock your communicator, you must enter the exact password to re-activate your communicator. If you forget the password, you need to perform a hard reset to resume using your communicator.
Recovering from a forgotten password If you did not activate the Off & Lock feature and you forget your password, you can delete the password from your communicator. Deleting a forgotten password also deletes all entries and files marked as Private. Important: If you synchronize with your computer before deleting a forgotten password, your communicator restores your private entries the next time you perform a HotSync operation, but it does not restore the password. To delete a forgotten password: 1.
Chapter 4 Applications Overview This chapter briefly describes each application and how to open it.
PhoneBook PhoneBook enables you to make and receive telephone calls, and to keep names, addresses, phone numbers, and other information about your personal or business contacts. In PhoneBook, you can do the following: ■ Store thousands of names, addresses, phone numbers, e-mail addresses, and more, in your Contacts list. ■ Create up to 50 speed dial entries. ■ Dial numbers from the Dial Pad, your Speed Dial list, your Contacts list, or the Call History list on your communicator.
Date Book Plus Date Book Plus lets you quickly and easily schedule appointments or any kind of activity associated with a date and/or a time. In Date Book Plus, you can do the following: ■ Enter a description of your appointment and assign it to a specific time and date. ■ Display a chart of your appointments for an entire week to easily spot available times and any potential scheduling overlaps or conflicts, or display descriptions of your appointments for one or two weeks.
Blazer Web Browser Blazer is a wireless Internet browser that lets you browse your favorite web sites while you’re on the go. Note: To use Blazer, you must subscribe to data services from your wireless service provider, and you must have an account established with an ISP (Internet Service Provider). Many wireless service providers also provide ISP services.
SMS Messaging SMS Messaging provides a way for you to exchange short text messages with other people who use GSM mobile phones and subscribe to an SMS service. Some wireless service providers also provide a gateway to communicate with e-mail addresses. In SMS Messaging, you can do the following: ■ Send and receive short text messages. ■ Read incoming messages directly from the Inbox. ■ Create messages quickly with quick list address selection and boilerplate text.
To Do List To Do List is a convenient place to create reminders and prioritize the things that you have to do. In To Do List, you can do the following: ■ Make a quick and convenient list of things to do. ■ Assign a priority level to each task. ■ Assign a due date for any or all of your To Do items. ■ Assign To Do items to categories so that you can organize and view them in logical groups. ■ Sort your To Do items either by due date, priority level, or category.
Memo Pad Memo Pad provides a place to take notes that are not associated with records in other applications such as Date Book Plus, PhoneBook, or To Do List. In Memo Pad, you can do the following: ■ Take notes or any kind of message on your communicator. ■ Drag and drop memos into popular computer applications like Microsoft Word when you synchronize using Palm™ Desktop software and HotSync® technology. ■ Assign memos to categories so that you can organize and view them in logical groups.
CityTime CityTime helps you keep track of the time anywhere around the globe. In CityTime, you can do the following: ■ Select a home city as a point of reference. ■ Display the day and time in four other cities simultaneously. ■ Add a definition for any city that isn’t in the default list. ■ Display sunrise and sunset information for your home city. To open CityTime: 1. Press Option 2. Press Blazer Tip: Page 54 . . You can also open CityTime by tapping the CityTime icon Launcher.
Calculator Calculator enables you to perform addition, subtraction, multiplication, division and a variety of advanced math and scientific calculations. In Calculator, you can do the following: ■ Select a view to perform specific types of calculations including: math, trigonometry, finance, logic, statistics, weight/temp, length, area, and volume. ■ Store and retrieve values. ■ Display the last series of calculations, which is useful for confirming a series of “chain” calculations.
Expense Expense lets you keep track of your expenses. In Expense, you can do the following: ■ Record dates, types of expenses, amount spent, payment method, and other details associated with any money that you spend. ■ Assign expense items to categories so that you can organize and view them in logical groups. ■ Keep track of vendors (companies) and people involved with each particular expense. ■ Log miles traveled for a particular date or expense category.
SIM Book SIM Book enables you to view and manage the phone list on your SIM card. In SIM Book, you can do the following: ■ Copy entries from your speed dial list to your SIM card so you can access your phone numbers if you move your SIM card to another phone. ■ Copy entries from your SIM card to your speed dial list. ■ Delete entries from your SIM card. ■ Dial entries on your SIM card. To open SIM Book: 1. Press Option 2. Press Menu . . 3. Tap the SIM Book icon Chapter 4 .
SIM Services SIM Services enables you to access applications on your SIM card that are provided by your wireless service provider. Note: Some wireless service providers do not put applications on the SIM card. In SIM Services, you can do the following: ■ Access applications from your wireless service provider on your SIM card. To open SIM Services 1. Press Option 2. Press Menu . . 3. Tap the SIM Srvcs icon Page 58 .
Chapter 5 Common Tasks In addition to the wireless communication applications, your Treo™ 270 communicator also includes a full suite of personal information manager (PIM) applications: Date Book Plus, the Contacts view in PhoneBook, To Do List, Memo Pad, and Expense. This chapter provides instructions on how to do tasks that are common to several applications.
Editing records After you create a record, you can change, delete, or enter new text at any time. Two screen features tell you when your communicator is in editing mode: ■ A blinking cursor ■ One or more edit lines Blinking cursor Edit line Entering text For information on how to enter text using the keyboard on your communicator, the onscreen keyboard, or the keyboard attached to your computer, see Chapter 2. Edit menu The Edit menu is available with any screen where you enter or edit text.
Copy Copies the selected text and stores it temporarily in the memory of your communicator. You can paste the text that you copy into another area of the current application or into a different application. Paste Inserts the text that you cut or copied at the selected point in a record. The text you paste replaces any selected text. If you did not previously cut or copy text, Paste does nothing. Select All Selects all of the text in the current record or screen.
Other ways to delete records You can also delete records in the following ways: ■ In the Details dialog box of the application, tap Delete, and then hold Option Return to finish. ■ Delete the text of the record. Note: and press In Date Book Plus, if you delete the text of a repeating event, you delete all instances of that event. Purging records Over time, as you use Date Book Plus, To Do List, and Expense, you’ll accumulate records in these applications that have outlived their usefulness.
Categorizing records Categorize records in the Contacts view in PhoneBook, To Do List, Memo Pad, and Expense applications so that they are grouped logically and are easy to review. (You can also categorize applications. See page 37 for details.) When you create a record, your communicator automatically places it in the category that is currently displayed. If the category is All, your communicator assigns it to the Unfiled category. You can leave an entry as Unfiled or assign it to a category at any time.
To display a category of records: 1. Tap the category pick list in the upper-right corner of the list screen. Category pick list 2. Select the category you want to view. The list screen now displays only the records assigned to that category. To define a new category: 1. Tap the category pick list in the upper-right corner of the screen. Category pick list 2. Tap Edit Categories. 3. Tap New. 4. Enter the name of the new category.
5. Hold Option and press Return twice to finish. You can assign any of your records to the new category. To rename a category: 1. Tap the category pick list in the upper-right corner of the screen. 2. Tap Edit Categories. 3. Select the category that you want to rename, and then tap Rename. 4. Enter the new name for the category. 5. Hold Option Tip: and press Return twice to finish. You can group the records in two or more categories into one category by giving the categories the same name.
■ PhoneBook: The Instant Lookup feature lets you scroll immediately to a Contacts record in PhoneBook by entering the first few letters of a first or last name, or the first name initial and the first few letters of a last name. ■ Expense: The Lookup feature displays the Contacts in PhoneBook that have data in the Company field. You can add these names to a list of attendees associated with an Expense record.
Using Find You can use Find to locate any text that you specify, in any application. To use Find: 1. Press Option Tip: and then press Shift to open the Find dialog box. If you select text in an application before you opening the Find dialog box, the selected text automatically appears in the Find dialog box. 2. Enter the text that you want to find. Find is not case-sensitive. For example, searching for the name “davidson” also finds “Davidson.” Find locates any word that begin with the text you enter.
Note: The first initial and last name search in the PhoneBook Instant Lookup feature is not available in the Phone Number Lookup feature. Phone Number Lookup displays records that begin with the letters you enter based on the sort method in your Contacts view in PhoneBook. For example, if your Contacts are sorted by last name and you enter “su,” the list displays “John Sung” and “Mario Suarez.
Looking up names to add to expense records In Expense, Lookup displays the names of Contacts entries in Phonebook that have data in the Company field. You can add these names to a list of attendees associated with an Expense record. To add names to an Expense record: 1. Open the Expense record to which you want to add names. 2. Tap Details. 3. Tap Who. Tap here 4. Tap Lookup. The Attendees Lookup screen displays all the names of Contacts entries in Phonebook that have data in the Company field. 5.
Sorting lists of records You can sort lists of records in various ways, depending on the application. Sorting is available in applications that have list screens: Contacts view in PhoneBook, To Do List, Memo Pad, and Expense. Note: You can also assign records to categories. See page 63 for details. To sort records in To Do List and Expense: 1. Open the application to display the list screen. 2. Tap Show. 3. Tap the Sort by pick list and select an option. 4. Hold Option and press Return to finish.
Making records private In all PIM applications, except Expense, you can make individual records private. Private records remain visible and accessible, however, until you select the Security setting to hide or mask all private records. See the section that begins on page 43 for details. Hiding and masking private records You can hide records that you mark as private. When you hide records, they do not appear anywhere in the application.
To display all private records: 1. Press Option and then press Menu 2. Tap the Security icon to access the Applications Launcher. . 3. Tap the Current Privacy pick list. Tap here 4. Tap Show Records. If you do not have a password, private records become visible. If you have a password, the Show Private Records dialog box appears. Enter your password in this dialog box, and then hold Option and press Return to finish. To display a specific masked record: 1.
5. Tap Show Records. 6. Hold Option and press Return to finish. Attaching notes In all PIM applications except Memo Pad, you can attach a note to a record. A note can be up to several thousand characters long. For example, for an appointment in Date Book Plus, you can attach a note with directions to the location. To attach a note to a record: 1. Display the entry to which you want to add a note. 2. In Contacts view in PhoneBook only: Press Menu Contact (/E). , and under Record, select Edit 3.
Choosing fonts In all PIM applications except Expense, you can change the font style to make text easier to read. You can choose a different font style for each application. Small font Bold font Large font To change the font style: 1. Open an application. 2. Press Menu . 3. Under Options, select Font (/F). 4. Use the scroll buttons to select the font style you want to use. Bold font Small font 5. Hold Option Large font and press Return to finish.
Performing a HotSync operation for the first time The first time you synchronize your data, you need to enter user information on both the communicator and Palm Desktop software. After you enter this information and synchronize, the HotSync Manager recognizes your communicator and doesn’t ask for this information again. If you are a System Administrator preparing several communicators for a group of users, you may want to create a user profile.
Beaming information Your communicator is equipped with an IR (infrared) port that you can use to beam information to another Palm OS device that’s close by and also has an IR port. The IR port is located on the top of your communicator, between the power button and the ringer switch, behind the small dark shield.
3. Under Record, select one of the following: The Beam command for an individual record (/B) In the Contacts view in PhoneBook only: Beam Business Card (/M) Beam Category (/Y) 4. When the Beam Status dialog box appears, point the IR port directly at the IR port of the receiving communicator. Tip: For best results, the path between the two devices must be clear of obstacles. If you have difficulty beaming information, see the troubleshooting tips that begin on page 214. 5.
To receive beamed information: 1. Turn on your communicator. 2. Point the IR port directly at the IR port of the transmitting communicator to open the Beam Status dialog box. 3. When the Beam dialog box appears, select a category for the entry. Tip: If you do not select a category the entry is placed in the Unfiled category. 4. Hold Option and press Return for Yes.
Chapter 6 Application-Specific Tasks This chapter is organized by application and gives instructions on how to do tasks that are specific to each of the following applications: ■ PhoneBook ■ Date Book Plus ■ Blazer® ■ SMS Messaging ■ To Do List ■ Memo Pad ■ CityTime ■ Calculator ■ Expense ■ SIM Book ■ SIM Services Chapter 6 Page 79
PhoneBook PhoneBook is the application where you store name and address information about people or businesses, and where you place and receive telephone calls. PhoneBook has five main views. You can place and receive calls from within any view, and you can also receive calls when the screen is off (but wireless mode must be on). The sections that follow explain how to use each of these views.
Using the Speed Dial view You can store up to 50 phone numbers in the Speed Dial list. There are five pages of numbers that hold ten numbers per page. Tip: You can keep your Speed Dial list organized by storing different types of numbers on different pages. For example, create separate pages for family, business, friends, and emergency numbers. Defining a Speed Dial button For each Speed Dial button you can assign a name, phone number, and extra digits such as an extension.
Adding Contacts list entries to your Speed Dial list To save time while creating your Speed Dial list, you can add entries from your Contacts list. To add an entry from your Contacts list to your Speed Dial list: 1. Tap a blank Speed Dial button. 2. Tap Lookup. Tip: You can also use the Phone Number Lookup feature to locate the entry you want to add. See the section that begins on page 67 for details. Tap Lookup Tap Add 3.
4. Press Space Tip: to dial. You can also tap the Speed Dial button for the number you want to call, or roll the rocker switch to select the button and then press the rocker switch or Return to dial the number. Selected button Tip: During a call, if you are prompted to enter a menu selection, tap Dial Pad and then enter the numbers you want with the keyboard. If you defined any Extra Digits, such as an extension, tap Extra Digits. 5. Close the lid to end the call.
Deleting Speed Dial entries If your Speed Dial list becomes full, or you no longer need an entry, you can delete it. Note: You cannot delete the Speed Dial button for your wireless service provider’s voicemail service. To delete a Speed Dial entry: 1. From the Speed Dial view, press Menu . 2. Under Edit, select Edit Speed Dial (/E). 3. Tap the entry you want to delete. 4. In the Edit Entry dialog, tap Delete. 5. Hold Option and press Return twice to confirm deletion.
Using the Dial Pad view The Dial Pad view provides access to a more traditional phone interface. You can use this view to dial numbers that are not in your Speed Dial or Contacts list. To dial a number with the Dial Pad: 1. Make sure wireless mode is on. See page 18 for details. 2. Press PhoneBook to access the Dial Pad view . 3. Enter the number you want to dial.
To create a new Contacts entry: 1. Press PhoneBook 2. Press Menu repeatedly to access the Contacts view . . 3. Under Record, select New Contact (/N). Cursor at Last name 4. Enter the last name of the person you want to add to your Contacts list. 5. Press the bottom scroll button to move to the First Name field and then enter the person's first name. 6. Press the bottom scroll button to move to other fields and then enter the other information that you want to include in this entry.
Duplicating a Contacts entry You can duplicate existing entries, which can be helpful when you want to enter multiple people from a single organization. When you duplicate an entry, the word Copy appears next to the name in the First Name field. To duplicate an entry: 1. From the Contacts view, select the name you want to duplicate. 2. Press Menu . 3. Under Record, and select Duplicate Contact (/T). 4. Edit the entry as necessary. 5. Hold Option and press Return to finish.
Selecting types of phone numbers You can select the types of phone numbers or e-mail addresses that you associate with a Contacts entry. Any changes you make apply only to the current entry. To select other types of phone numbers in an entry: 1. Select the contact name for the entry that you want to change. 2. Press Space 3. Press Menu to open the entry. . 4. Under Record, select Edit Contact (/E). 5. Tap the pick list next to the label you want to change. Tap triangle 6. Select a new label. 7.
7. Select any of the following settings: Category Assign the entry to a category. Private Hide this entry when Security is turned on. 8. Hold Option and press Return to finish. Using the Call History view The Call History view provides quick access to the previous 1,000 incoming and outgoing calls. If you miss a call when your Treo is on and you remain in a coverage area, your missed calls appear in the Call History list and you receive a missed call alert message.
Calling a number in your Call History list In addition to viewing a list of your incoming, outgoing, and missed calls, you can use the Call History view to dial any number that appears on this view. To dial a number from the Call History view: 1. Make sure wireless mode is on. See page 18 for details. 2. Use the scroll buttons to select the number you want to call. Tap the entry you want to dial Tap Dial to call selected number 3. Press Space Tip: to dial.
Using the Active Call view After you dial and establish a connection, or receive an incoming call, the Active Call view icon appears in the lower left corner of the PhoneBook screen, and the Active Call view appears: Tap Dial Pad to enter extra numbers such as a PIN code or menu selection Note: If you dialed a Speed Dial entry that includes Extra Digits, the Dial Pad button changes to an Extra Digits button. Tap Extra Digits to dial the additional predefined numbers, such as an extension.
To end a call, do any of the following: ■ Close the lid (if the headset is not attached). ■ Press Backspace . ■ Press the button on the headset (if it is attached). ■ Tap Hang Up. Adjusting call volume You can adjust the volume level from the Active Call view when a call is in progress. To adjust the call volume, do one of the following: ■ Roll the rocker switch up, or press the top scroll button, to increase the volume.
Placing calls on hold You can place an active call on hold while you use other applications on your communicator or complete another task. To place a call on hold: 1. Place or answer a call. Call status indicator Tap Hold Tap Off Hold 2. Tap Hold to place the call on hold. 3. Tap Off Hold to return to the call. Handling Multiple Calls You can use the Active Call view to handle a variety of situations that involve multiple calls.
To dial another number while a call is in progress: 1. From the Active Call view, repeatedly press PhoneBook use. Tip: to access the view you want to You can also tap the Speed Dial, Dial Pad, Contacts, or Call History view icons. 2. Dial the number. 3. When the confirmation message appears, hold Option and press Return for Yes. To switch between two active calls, do any of the following: ■ Tap the call status line of the call you want to make active.
Forwarding calls If you need to turn off the wireless mode or know you will be traveling outside a coverage area, you can forward your calls to another number. Keep in mind that your wireless service provider will still charge you for your forwarded calls. Note: Because call forwarding information is stored by the network, it’s a good idea to check the current network settings both before and after you change the call forwarding option. To forward calls to another number: 1.
Returning a missed call When your Treo is on and you remain in a coverage area, any calls you miss appear in the Call History list and you receive a missed call alert message. When your phone is off or you travel outside a coverage area, your calls are forwarded to voicemail and they do not appear in the Call History list. ■ If you miss multiple calls, a message appears indicating the number of calls you missed. See page 90 for instructions on calling a number in your Call History list.
PhoneBook menus PhoneBook menus are shown here for your reference, and PhoneBook features that are not explained elsewhere in this guide are described here. See page 31 for information about choosing menu commands. The Record and Options menus differ depending on which view is active.
Preferences ■ Remember last category. Determines how the Contacts list appears when you return to it from another application. If you select this check box, the Contacts list shows the last category you selected. If you clear it, the Contacts list displays the All category. ■ List By. Determines how the Contact entries are sorted in the Contacts view, and also controls the PhoneBook Instant Lookup feature and SMS address lookup options. Call Preferences ■ Block outgoing caller ID.
■ Default country. Determines if North American hyphenation conventions are automatically applied to phone numbers, and whether the following two options are available: ■ When dialing, add this area code to 7 digit numbers. Inserts the area code you specify in front of 7-digit numbers before dialing. ■ Always dial 1 in front of the area code. Inserts a 1 in front of 10-digit numbers before dialing.
Phone Info ■ Number: Displays your SIM card’s phone number. Note: About PhoneBook Page 100 Not all wireless service providers include the phone number on the SIM. If the phone number is not on the SIM, this field displays “No number on SIM” instead of the number. ■ IMEI: Displays your communicator’s equipment ID number which uniquely identifies your communicator to your mobile service provider’s network.
Date Book Plus When you open Date Book Plus, the screen shows the current date and a list of times for a normal business day. Working in Day View Day View shows an hourly calendar for a particular date. If there are events scheduled on that date, they appear in the appropriate time slot. To view or select a date, do one of the following: ■ Use the scroll buttons or roll the rocker switch to move forward or backward one day at a time.
You can also schedule events that occur on a particular date but have no specific start or end times, such as birthdays, holidays, and anniversaries. These are referred to as “untimed events.” Untimed events appear at the top of the list of times, marked with a diamond. You can have more than one untimed event on a particular date. You can also schedule a repeating event, such as a weekly meeting, and continuous events, such as a three-day conference or a vacation. To schedule an event: 1.
4. Hold Option event. Tip: and press Return so that no start or end times are defined for the new You can also create a new untimed event by making sure no event is selected and then entering a description. 5. Enter a description of the event. New untimed event No time selected 6. Tap a blank area on the screen to deselect the untimed event. Note: If you create an event and decide later that there is no particular start or end time, you can easily change it to an untimed event.
Setting an alarm for an event The Alarm setting enables you to set an audible alarm for events in Date Book Plus. You can set an alarm to sound minutes, hours, or days before an event. The default Alarm setting is 5 minutes before the time of the event, but you can change this to any number of minutes, hours, or days. When you set an alarm, this icon appears to the far right of the event with the alarm. When the alarm tone sounds, a reminder message also appears onscreen. Note: Make sure the ringer is on.
Scheduling repeating or continuous events The Repeat function lets you schedule events that recur at regular intervals or extend over a period of consecutive days. A birthday is a good example of an event that repeats annually. Another example is a weekly guitar lesson that falls on the same day of the week and the same time of day. Typically, a continuous event is an untimed event such as a business trip or a vacation that continues for several days but doesn’t occur at a particular time of day.
Changing and deleting repeating or continuous events If you change or delete a repeating or continuous event you can apply the action to only the current event, to all instances of the event, or to the current event and instances that follow. To change or delete repeating events: 1. Select the record you want to change or delete. 2. Tap Details. 3. Enter the change. 4. Hold Option and press Return to accept the change, or tap Delete. 5. Tap one of the following: Current.
Changing the Date Book Plus view In addition to displaying the calendar for a specific day, you can also display a whole week in graph or text format, a month, a year, or a list of your appointments, as well as the current time. To cycle through Day, Week, Week with Text, Month, Year, and List views: ■ Repeatedly press Date Book Plus to display the next view. To display the current time: 1. Tap and hold the stylus on the date in the date bar to display the current time.
■ The Week View shows the time span defined by the Start Time and End Time in the Date Book Plus Preferences settings. If you have an event before or after this time span, a bar appears at the top or bottom of that day's column. Use the onscreen scroll arrows to scroll to the event. Working in Week View with Text The Week View with Text shows an entire week with a description of each scheduled event.
Working in Month View The Month View screen shows which days have events scheduled. Dots and lines in the Month View indicate events, repeating events, and untimed events. Previous/next month Dashed line indicates continuous or repeating event Dots on right or left side indicate events Dots below date indicate untimed events Month View icon You can control the dots and lines that appear in the Month View. See page 114 for details.
Tips for using Year View Keep the following points in mind: ■ Tap a day to display the date and events for that day in the title bar. A minus sign indicates only one event is scheduled on that day. A plus sign indicates multiple events are scheduled on that day. ■ Use the scroll buttons or rocker switch to move between days. You can also tap the scroll arrows in the lower-right corner to move forward or backward a day.
Spotting event conflicts With the ability to define specific start and end times for any event, it’s possible to schedule events that overlap (an event that starts before a previous event finishes). An event conflict (time overlap) appears in the Week View as overlapping bars. The Day View displays overlapping brackets to the left of the conflicting times. Event conflict Working with floating events Date Book Plus can include events that are a combination of a To Do item and a Date Book event.
■ Avoid scheduling a floating event that repeats daily. These events can accumulate quickly unless you complete them each day. ■ When viewing a floating event in a desktop application, the Note field will contain a series of characters: ##f@@@@@@ for an incomplete event and ##c@@@@@@ for a complete event. Do not remove or edit these characters. Working with To Do items Date Book Plus can create and display To Do items. To Do items appear in priority order at the top of the Day View screen.
Using templates You can use templates to create a list of standard events. You can then select an event from this list and add it to your calendar. Since Date Book Plus saves all the event attributes, including alarms and notes, templates can really save you time when entering reminder notices or events that recur on different days and times. To create a template: 1. Select the event you want to save as a template. 2. Press Menu . 3. Under Record, select tap Create Template (/V). 4.
Date Book Plus menus Date Book Plus menus are shown here for your reference, and Date Book Plus features that are not explained elsewhere in this guide are described here. See page 31 for information about choosing menu commands. Record menu List View Day View New To Do Creates a new To Do item and adds it to your Date Book Plus and To Do List database. Duplicate Item Creates a copy of the selected event and opens the Details dialog box for the new event.
Preferences (Day View) Chapter 6 ■ Start/End Time. Defines the start and end times for Date Book Plus screens. If the time slots you select do not fit on one screen, you can tap the scroll arrows to scroll up and down. ■ Event Duration. Defines the default duration for new events. ■ Week Start. Defines the first day of the week. This setting overrides the System Preferences setting for all Date Book Plus views. ■ Initial View. Defines the view that appears when you start Date Book Plus.
Display Options Page 116 ■ Show Time Bars. Activates the time bars that appear in the Day View. The time bars show the duration of an event and illustrate event conflicts ■ Compress Day View. Controls how times appear in the Day View. When Compress Day View is off, all time slots display. When it is on, start and end times display for each event, but blank time slots toward the bottom of the screen disappear to minimize scrolling. ■ Show PM Label. Displays a “p” after PM times. ■ Show End Times.
Alarm Preferences Chapter 6 ■ Alarm Sound. Sets the tone of the alarm. ■ Snooze Sound. Sets the tone of the snooze alarm. ■ Remind Sound. Sets the tone of the reminder alarm. The reminder alarm sounds when the snooze alarm is not acknowledged. ■ Play Sound. Defines how many tones the alarm emits before it stops. The choices are Once, Twice, 3 Times, 5 Times, and 10 Times. ■ Repeat Alarm. Defines how many times the alarm repeats when it is not acknowledged.
To Do Preferences ■ Show Categories. Displays the To Do items in the categories you select. ■ Priorities Displayed. Displays To Do items with the selected priority level. The choices are 1 only, 1-2, 1-3, 1-4, and 1-5. ■ Show Priority. Displays the priority level for To Do items. ■ Show Completed Items. Displays completed To Do items. ■ Show Undated Items. Shows all To Do items that have not been assigned a due date. ■ Show Dated Items. Shows all To Do items that have been assigned a due date.
Week Preferences ■ Time Format. Defines the format of the time display. The choices are No Time, 11p, 11:30p, 23, 23:30. ■ Display To Do. Defines where To Do items will appear on the Date Book Plus screen. The choices are Top, Bottom, and Hide. ■ Week Start. Defines the first day of the week for Week View with Text. ■ Wordwrap Single Entry. Wraps text in cells that contain a single event to display as much text as will fit in the cell. ■ Hide Untimed Floating Events.
Year Preferences ■ Hide Floating and Done Items. Removes floating events and completed To Do items from the Year View display. ■ Hide Untimed Events. Removes untimed events from the Year View display. ■ Hide Zero Duration Events. Removes events without a duration from the Year View display. ■ Hide Events <. Removes events that are shorter than the time you specify from the Year View display. The choices are 0.5, 1, 2, 4, 8, and 12. ■ Hide Daily Repeating Events.
Blazer If you can’t hold the world in the palm of your hand, at least you can hold the World Wide Web when you use Blazer to browse the Internet on your communicator’s screen. To use Blazer, you must subscribe to data services from your wireless service provider, and you must have an account established with an ISP (Internet Service Provider). Many wireless service providers also provide ISP services.
5. Enter the URL you want to view. 6. Hold Option and press Return to finish. While a page is loading, a Progress icon appears in the lower right corner of the screen. You can tap links to other pages as soon as they appear. You don’t need to wait until a page fully loads. To stop loading a page, tap the Stop icon in the lower left corner of the screen. Tap to go to home page 7.
Working with bookmarks The Bookmark view makes it easy for you to get to web sites you visit often. Viewing bookmarked pages Your communicator may come with a few bookmarks already in place. You can jump directly to any of the predefined bookmarks, or to any pages for which you’ve created a bookmark. To view a bookmark: 1. Make sure wireless mode is on. See page 18 for details. 2. Press Blazer twice to access the Bookmark view . 3. Tap the bookmark you want to view.
Tip: You can also add a bookmark by tapping an empty bookmark slot in the Bookmark view and entering a Name, Description, and URL for the page you want to bookmark. To define a bookmark: 1. From the Bookmark view, press Menu . 2. Under Bookmark, select Add Bookmark (/A). Tip: You can also open the New Bookmark dialog box by tapping an empty bookmark slot. 3. Enter a Name, Description, and URL for the page you want to bookmark. Tap an empty slot 4. Hold Option and press Return to finish.
Deleting bookmarks If your bookmark list becomes full, or you no longer need an entry, you can delete it. To delete a bookmark: 1. From the Bookmark view, press Menu . 2. Under Bookmark, select Edit Bookmark (/E). 3. Tap the entry you want to delete. 4. In the Edit Bookmark dialog, tap Delete. 5. Hold Option and press Return twice to confirm deletion. Arranging your bookmarks As your bookmark list grows, you may want to rearrange the entries or move entire pages.
To rearrange bookmark pages: 1. From the Bookmark view, press Menu . 2. Under Bookmark, select Edit Bookmark (/E). 3. Drag the page to the slot where you want it to appear. A grey line appears next to the page when it is in drag mode. When dropping a page on the top row, the grey line appears to the left of the slot where the page will appear. When dropping a page on the bottom row, the grey line appears to the right of the slot where the page will appear. Drag a page to another slot 4.
Properties Displays the Page Properties dialog box where you can view the Page Name, URL, Size (Bytes) and whether the page was loaded from the cache.
Preferences Browser tab: Home page. Displays the URL of the current home page selection. Tap this option to open the Set Home Page dialog box and select a different home page. To restore the factory default Home Page setting, tap Restore in the Set Home Page dialog box. ■ Note: Page 128 Some service providers may not support the default Home Page setting. ■ Initial view. Determines whether the Page view or Bookmark view appears when you start the Blazer application. The default option is Page view.
Preferences (continued) Advanced tab: ■ Cache Size (K). Displays the amount of memory that Blazer reserves to store recently viewed pages. The amount of free memory available on your communicator appears below this option. ■ Clear. Erases all the pages stored in the cache. You cannot cancel or undo this action. ■ Accept Cookies. Enables the receipt of Internet cookies. The default setting for this option is on. ■ Clear Cookies. Erases all the cookies stored on your communicator.
SMS Messaging In addition to dialing and receiving voice calls, you can use your Treo to send and receive short text messages. These text messages, also called SMS (Short Message Service) messages, are similar to e-mail messages that you send and receive from your computer, but are limited to 160 characters in length. The person receiving your message must also have a GSM mobile phone and a wireless service provider that supports text messages.
Receiving SMS messages When you receive SMS messages, the New SMS Messages alert appears. Note: You can receive SMS messages even if you don’t subscribe to your wireless service provider’s SMS service. Number of new messages Most recent message In the New SMS Messages alert dialog box, you can save or respond to the first message by tapping any of the following buttons: OK Saves the message in the SMS Messages Inbox category, dismisses the alert dialog box, and returns you to the previous application.
Message category pick list Current message Message header 2. Hold Shift Message text and use the scroll buttons to page through the messages. Tips: ■ If a message is too long to fit on one screen, press the scroll buttons to view additional screens in the current message. ■ If a message is longer than 160 characters, it is divided into sub-messages which appear as separate items.
5. Make sure wireless mode is on. See page 18 for details. 6. Hold Option and press Return to send the message. To call the sender: 1. From the SMS Messages Inbox, select the message from the person you want to call. 2. Press Menu . 3. Under Message, select Call Sender (/A). Creating SMS messages SMS Messaging enables you to create short text messages and to send them to a mobile phone number or an e-mail address.
Address by Mobile Number Enter a mobile phone number to send an SMS message to another GSM mobile phone. Address by Email Address Enter an e-mail address to send an SMS message to an e-mail address. To send a message to an e-mail address, you must subscribe to your wireless service provider’s SMS Email service and enter their SMS Email Center number in the SMS Preferences dialog. See page 130 for details.
Creating a message signature You can create a signature of up to 80 characters. Then, when you create a message, SMS Messaging automatically inserts your signature at the end of each message you create. If necessary, you can edit the default signature text when you create a message. Note: The signature text you define applies only to new messages. If you are editing a message or have messages in the Pending folder when you create the signature text, the signature text will not be added to those messages.
Copying and forwarding messages You can save time by copying text from your SMS messages, or forwarding messages. To copy text from an SMS message: 1. From any SMS Messaging list view, tap the text of the message you want to copy. 2. Press Menu . 3. Under Edit, select Select All (/S). Tip: To copy only a portion of the message, highlight the text you want to copy and select Copy (/C) instead of Select All. 4. Open the message or application where you want to insert the message. 5. Press Menu . 6.
Resending messages You can resend any messages in the Sent category. 1. In the Sent category, select the message you want to resend. 2. Press Menu . 3. Under Message, select Resend (/R). 4. If necessary, edit the message. 5. Make sure wireless mode is on. See page 18 for details. 6. Hold Option and press Return to send the message. Sorting messages 1. From any SMS Messaging list view, press Menu . 2. Under Options, select Sort. 3. Tap the Sort by pick list to select the sort method you want to use.
Deleting messages You can delete a single message or a group of messages from a particular category. To delete a single message: 1. From any SMS Messaging list view, select the message you want to delete. 2. Press Menu . 3. Under Message, select Delete (/D). 4. If prompted, hold Option Tip: and press Return to confirm deletion. You can also delete a message by selecting it and pressing Backspace . To delete a group of messages: 1.
Message menus Pending view Inbox view Sent view Message view Open Displays the selected message in single message view. Options menus Message views List views Preferences About SMS Chapter 6 ■ SMS Message Center number. Enables you to enter the number for your wireless service provider’s SMS message center. This number is stored on your SIM card. ■ SMS Email Center number. Enables you to enter the telephone number for your wireless service provider’s e-mail gateway.
To Do List To Do reminds you of tasks you have to complete. A record in To Do List is called an “item.” To create a To Do item: 1. Press Option and then press Date Book Plus Tip: . You can also access To Do List by tapping the To Do List icon Launcher. in the Applications 2. Enter the text of the To Do item. The text can be longer than one line. New To Do item 3. Press a scroll button to deselect the To Do item.
Setting a due date You can associate a due date with any To Do item. You can also sort the items that appear in the list based on their due date. To set a due date for a To Do item: 1. Tap the text of the item whose details you want to change. 2. Tap Details. 3. Tap the Due Date pick list. Tap here 4. Tap the date that you want to assign the item: Today Assigns the current date. Tomorrow Assigns tomorrow’s date. One week later Assigns the date exactly one week from the current date.
Tap here 4. Tap the category that you want to assign the item. 5. Hold Option Tip: and press Return to finish. If you turn on the Show Categories option in the To Do Show options dialog, you can tap directly on the category in the To Do list to assign categories. Checking off a To Do item You can check off a To Do item to indicate that you’ve completed it.
2. Select any of the following settings: Show Completed Items Displays your completed items in the To Do list screen. If you turn off this setting, your To Do items disappear from the list when you complete (check) them. Items that no longer appear on the list because you turn off this setting have not been deleted. They are still in the memory of your communicator. Purge completed items to remove them from memory.
Memo Pad A memo can contain up to 4,000 characters. The number of memos you can store is dependent only on the memory available on your communicator. A record in Memo Pad is called a “memo.” To create a new memo: 1. Press Option and then press PhoneBook Tip; . You can also access Memo Pad by tapping the Memo Pad icon Applications Launcher. 2. Enter the text you want to appear in the memo. Press Return in the memo.
Memo Pad menus Memo Pad menus are shown here for your reference, and Memo Pad features that are not explained elsewhere in this guide are described here. See page 31 for information about choosing menu commands. The Record and Options menus differ depending on whether you’re displaying the Memo list or an individual memo. Record menus Memo list Memo screen Options menus Memo list Memo screen Preferences Displays the Memo Preferences dialog box, where you define the sort order for memos.
CityTime CityTime enables you to display the day and time in your home city and in four other cities around the globe. Whether you’re travelling or at home, now it’s easy to keep track of the best time to reach your business associates, friends, and family in far away places. Note: CityTime does not automatically update the current time for Daylight Savings Time. Setting your home city The home city serves as a point of reference for your other city selections.
2. Tap the remaining pick lists and select the other three cities you want to display. Tip: You can temporarily display the day and time for any other city by tapping the city’s location on the map display. Adding cities If the city you want to display is not in the predefined list, you can use the Edit Cities command to add it. To add a city to the list: 1. Press Menu . 2. Under Options, select Edit Cities (/E). 3. Tap New. 4. Enter the city name and other information. 5.
Calculator Calculator includes two operating modes: Basic and Advanced. In Basic mode you can perform simple mathematical calculations. In Advanced mode you can access scientific functions and perform sophisticated math calculations. This section explains how to select the operating mode and use the buttons and menu options available in each mode. Selecting the Calculator mode The Toggle Mode command enables you to choose whether you want to work in Basic Calculator mode or Advanced Calculator mode.
Displaying Recent Calculations The Basic Calculator’s Recent Calculations command enables you to review the last series of calculations and is particularly useful for confirming a series of “chain” calculations. To display recent calculations: 1. Press Menu . 2. Under Options, select Recent Calculations (/I). 3. After you finish reviewing the calculations, hold Option and press Return to finish. Using the Advanced Calculator mode The Advanced Calculator screen consists of three regions.
Primary buttons Clears the entire calculation and enables you to begin a fresh calculation. Clears the last digit you entered. Use this button if you make a mistake while entering a number in the middle of a calculation. This button enables you to reenter the number without starting the calculation over. Enters an exponent symbol in the calculation. Opens the Constants dialog box where you can select a constant to include in the calculation.
Trigonometry buttons Calculates the sine of the current number. Calculates the cosine of the current number. Calculates the tangent of the current number. Calculates the hyperbolic sine of the current number. Calculates the hyperbolic cosine of the current number. Calculates the hyperbolic tangent of the current number. Calculates the arc (inverse) sine of the current number. Calculates the arc (inverse) cosine of the current number. Calculates the arc (inverse) tangent of the current number.
■ PV = 100,000 ■ FV = 0 2. Enter 12 and tap the P/Yr button to enter the number of payments per year. 3. Tap Edit. 4. Tap the Pmt line and erase all values on the line including zero. 5. Tap Solve. 6. Hold Option and press Return to finish. You can use a similar process to solve other financial equations by entering four of the variables to find the value of the fifth variable. Stores the current number as the total number of payments over the life of the loan.
Logic buttons Shifts the value to the left and fills the new places with zeros. Enters D in a hexadecimal calculation. Enters E in a hexadecimal calculation. Enters F in a hexadecimal calculation. Calculates bit-by-bit commonalities between two arguments. Calculates bit-by-bit unique occurrences in two arguments. Shifts the sign bit to the right in signed mode. Enters A in a hexadecimal calculation. Enters B in a hexadecimal calculation. Enters C in a hexadecimal calculation.
Generates a random number between 0 and 32767 and then divides this number by 32768 to generate a random fraction between 0 and .99997. Returns the number of combinations of n items taken m at a time. Returns the number of permutations of n items taken m at a time. Weight/Temp buttons Indicates the current value is entered in ounces. When you tap this button after tapping another unit of measure, it converts the value to ounces. Indicates the current value is entered in pounds.
Indicates the current value is entered in nautical miles. When you tap this button after tapping another unit of measure, it converts the value to nautical miles. Indicates the current value is entered in millimeters. When you tap this button after tapping another unit of measure, it converts the value to millimeters. Indicates the current value is entered in centimeters. When you tap this button after tapping another unit of measure, it converts the value to centimeters.
Volume buttons Indicates the current value is entered in teaspoons. When you tap this button after tapping another unit of measure, it converts the value to teaspoons. Indicates the current value is entered in fluid ounces. When you tap this button after tapping another unit of measure, it converts the value to fluid ounces. Indicates the current value is entered in cups. When you tap this button after tapping another unit of measure, it converts the value to cups.
8. From the Advanced Calculator screen, press Menu . 9. Under Program, select Import (/I). 10. Tap the pick list and select the view you modified. 11. Tap Import. 12. Tap Replace to change an existing definition, or tap Add to create an additional definition. 13. Hold Option and press Return twice to finish. Calculator menus Calculator menus are shown here for your reference, and Calculator features that are not explained elsewhere in this guide are described here.
Expense Expense enables you to record the date, expense type, and the amount that you spent. A record in Expense is called an “item.” You can sort your Expense items into categories or add other information that you want to associate with the item. To create an Expense item: 1. Press Option and then press Menu 2. Tap the Expense icon to access the Applications Launcher. . 3. Enter the amount of the expense. Cursor of new item Tap New 4.
To change the date of an Expense item: 1. Tap the Expense item you want to change. 2. Tap the date of the selected item. Tap date 3. Select the new date. 4. Hold Option and press Return to finish. Entering receipt details Expense provides a variety of options that you can associate with an item. These options appear in the Receipt Details dialog box. To open the Receipt Details dialog box: 1. Tap the Expense item to which you want to assign details. 2. Tap Details. 3.
Currency Enables you to choose the type of currency used to pay the Expense item. The default currency unit is defined in the Preferences dialog (see page 162). You can also display up to four other common types of currency. see the next section in this chapter for more information. Vendor and City Lets you record the name of the vendor (usually a company) associated with the expense and the city where the expense was incurred.
Tap a Country box 4. Enter the name of the country and the symbol that you want to appear in Expense. 5. Hold Option Note: and press Return twice to finish. If you want to use your custom currency symbol as the default for all Expense items, select the symbol in the Preferences dialog box. If you want to use your custom currency symbol only for a particular Expense item, select the symbol in the Receipt Details dialog box associated with that item.
Expense menus Expense menus are shown here for your reference, and Expense features that are not explained elsewhere in this guide are described here. See page 31 for information about choosing menu commands. Record menu Options menu Preferences About Expense Page 162 ■ Use automatic fill. Lets you select an expense type by entering the first letter of an expense type. For example, if you enter the letter “T,” it enters the “Taxi” expense type.
SIM Book In addition to storing your phone number and billing information, your SIM card also contains a phone list where you can store names and numbers that are separate from your Contacts and Speed Dial lists. By storing a phone list on your SIM card, you have immediate access to your phone list if you move your SIM card to another phone. The SIM Book application is a utility that enables you to view and manage the phone list on your SIM card.
Copying entries from your SIM card to your Speed Dial list Just as you can copy entries from your PhoneBook Speed Dial list to your SIM Book, you can also copy entries from your SIM card to your PhoneBook Speed Dial list. To copy entries from your SIM card to your Speed Dial list: 1. Tap SIM in the pick list in the upper-right corner. 2. Tap the entry you want to copy. Tip: To copy all the numbers in your Speed Dial list, press Menu select Copy All.
Dialing entries on your SIM card In addition to storing phone numbers on your SIM card, you can also dial numbers using SIM Book. To dial entries from your SIM card: 1. Tap SIM in the pick list in the upper-right corner. Tip: You can also dial entries from your Speed Dial list by tapping Speed Dial instead. 2. Select the entry you want to dial. Tip: You can also send a text message to an SMS-enabled mobile phone by tapping a mobile phone number and then tapping SMS instead of Dial.
SIM Services The SIM Services application provides an interface between your SIM card and your phone. It enables your SIM card to store applications from your wireless service provider that can control functions on your phone. For example, your wireless service provider might offer an application that provides a secure connection for online banking services. To use SIM Services 1. Press Option and then press Menu 2. Tap the SIM Services icon to access the Applications Launcher. . 3.
Chapter 7 Setting Preferences for Your Communicator The Preferences screens enable you to customize the configuration options on your Treo™ 270 communicator. In the Preferences screens, you can do the following: Buttons Assign different applications to many of the buttons and icons on your communicator and the HotSync® cable. Connection Configure your communicator for use with a HotSync cable, for infrared communication, or for wireless data communication.
Buttons Preferences The Buttons Preferences screen enables you to associate different applications with the application buttons on the front of your communicator and the HotSync button on the cable. For example, if you find that you seldom use SMS Messaging and often use To Do List, you can assign the SMS Messaging button to start To Do List. Any changes you make in the Buttons Preferences screen become effective immediately; you do not have to change to a different screen or application.
Connection Preferences The Connection Preferences screen lets you create configurations for communicating with other hardware devices: PC, Modem, or Infrared. Configurations, or profiles, once activated are available to applications on your communicator. The Connection Preferences screen displays a list of available configurations that you can modify as needed. This list will vary depending on the software you have added to your communicator.
Setting wireless modem configurations Wireless modem configurations enable you to use your communicator to communicate with your ISP or dial-in server. In most cases the configuration software on the Handspring CD will set up the Connection and Preferences settings you need to connect to your ISP or dial-in server.
7. Tap the Speed pick list and select 57,600. 8. Tap the Country pick list and select the country in which you are using your communicator. 9. Tap the Flow Control (Flow Ctl) pick list, and select Automatic, On (Xon), or Off (Xoff) flow control for the modem connection. 10. If needed, edit the Init String to change the modem setup string. 11. Hold Option and press Return twice to return to the Connection Preferences screen.
7. Enter the initialization string appropriate for your communicator. 8. Hold Option and press Return twice to return to the Connection Preferences screen. Digitizer Preferences The Digitizer Preferences screen opens the digitizer calibration screen. This is the same screen that appears when you start your communicator for the first time. You can recalibrate your screen after a hard reset, or if your digitizer drifts.
Time, date, week start, and numbers formats The Time setting defines the format for the time of day. The time format that you select appears in all applications on your communicator. To select the time, date, week start, and numbers format: 1. Tap the Time pick list and select a format. 2. Tap the Date pick list and select a format. 3. Tap the Week starts pick list, and select whether you want the first day of the week to be Sunday or Monday.
System, alarm, and game sounds Your communicator uses a variety of sounds. The System, Alarm, and Game Sound settings enable you to turn the sounds on or off, and to adjust the volume level. Note: If the ringer switch is set to no sound, the ringer setting overrides the sound settings and all sounds are turned off. The system, alarm, and game sounds are used when the ringer switch is set to the ring position. To set the system, alarm, and game sounds: 1.
To select a service: 1. Tap the Service pick list. Tap here to display a list of service templates 2. Tap the predefined service template. Note: If you want to enter a name for a new service template, see page 179 for details. Entering a user name The User Name setting identifies the name you use when you log into your Internet Service Provider or your dial-in server. Although this field can contain multiple lines of text, only two lines appear onscreen. To enter a user name: 1.
To enter a password: 1. Tap the Password field. 2. Enter the password you use to log into your server. Enter password here Tap here 3. Hold Option Note: and press Return to finish. The Password field updates to display the word “Assigned.” Selecting a connection The Connection Preferences settings tell your communicator about the hardware you are using for remote data connections.
Adding telephone settings When you select the Phone field, your communicator opens a dialog box in which you define the telephone number you use to connect with your ISP or dial-in server. In addition, you can also define a prefix, disable Call Waiting, and give special instructions for using a calling card. Note: The Phone Setup dialog box works correctly for AT&T and Sprint long-distance services.
Disabling Call Waiting Call Waiting can cause your session to terminate if you receive a call while you are connected. If your telephone has Call Waiting, you need to disable this feature before logging into your ISP or dial-in server. To disable Call Waiting: 1. Tap the Disable call waiting check box to select it. Select this box if you need to disable Call Waiting Enter your disable code here 2. Enter the code to disable Call Waiting on the Disable call waiting line.
Connecting to your service After you set your Connection and Network Preferences, establishing a connection to your Internet Service Provider (ISP) or your company’s network (dial-in server) is easy. To establish a connection: ■ Tap Connect to dial the current service and display the Service Connection Progress messages. Tip: To see expanded Service Connection Progress messages, press the bottom scroll button.
To select a connection type: 1. Tap the service field. 2. Tap Details. Select connection type 3. Tap the Connection type pick list and select one of the following connection types: PPP Point-to-Point protocol SLIP Serial Line Internet Protocol CSLIP Compressed Serial Line Internet Protocol Note: If you are not sure, try PPP; if that doesn’t work, ask your Internet Service Provider or your System Administrator for the correct connection type.
Defining primary and secondary DNS The Domain Naming System (DNS) is a mechanism in the Internet for translating the names of host computers into IP addresses. When you enter a DNS number (or IP address), you are identifying a specific server that handles the translation services. Each IP address has four sections, separated by periods. In the Details dialog box, you enter each section separately.
To enter a permanent IP address: 1. Tap the IP Address check box to deselect it and display a permanent IP address field below the check box. 2. Tap the space to the left of the first period then enter the first section of the IP address. Note: Each section must be a number from 0 to 255. 3. Tap and enter the remaining sections of the IP address. 4. Hold Option and press Return to finish. Creating a login script A login script is a series of commands, similar to an autoexec.
Send Transmits specific characters to the TCP/IP server to which you are connecting. Send CR Transmits a carriage return or LF character to the TCP/IP server to which you are connecting. Send User ID Transmits the User ID information entered in the User ID field of the Network Preferences screen. Send Password Transmits the password entered in the Password field of the Network Preferences screen. If you did not enter a password, this command prompts you to enter one.
Network Preferences menu commands The Network Preferences screen includes menu commands to make it fast and easy to create and edit service templates. TCP/IP application menus are show here for your reference. See page 31 for more information about choosing menu commands. Service menu Options menu TCP/IP troubleshooting If you are having a problem establishing a network connection using TCP/IP, check this section and try the suggestions listed.
Adding a DNS number If your ISP or dial-in server requires a DNS number and you did not enter that information in the Network Preferences screen, it will appear that you successfully logged into your network. When you try to use an application or look up information, however, the connection fails. If this occurs, try adding a DNS number. Ask your ISP or your System Administrator for the correct Primary and Secondary DNS IP numbers.
Ringer Preferences The Ringer Preferences screen controls the behavior of the ringer on your communicator. You can control the ring volume, select unique ring tones for incoming voice calls and SMS messages, and turn the vibrate option on and off for each of the two ringer switch positions. To select Ringer Preferences: 1. Tap the Ring Volume pick list and select the level you want to use for incoming voice calls and SMS messages. 2.
To create a ShortCut: 1. Tap New. 2. On the ShortCut name line, enter the letters you want to use to activate the ShortCut. Tap New 3. Tap the ShortCut Text area and enter the text that you want to appear when you type the ShortCut characters. Tip: You may want to add a space (space character) after the last word in your ShortCut text. This way, a space automatically follows the ShortCut text. 4. Hold Option Tip: and press Return to finish.
Page 188 Setting Preferences for Your Communicator
Chapter 8 Advanced HotSync® Operations HotSync® Manager enables you to synchronize data between one or more Palm OS® devices and Palm™ Desktop software. To synchronize data, you must connect your Treo™ 270 communicator and your desktop software either directly, by connecting your communicator to the HotSync cable attached to your computer or using infrared communication, or indirectly, with using the built-in wireless modem.
Enable HotSync software at system startup Starts Serial Port Monitor automatically when you start your computer. You must restart your computer before this option takes affect. If this option is not checked, you must enable Serial Port Monitor manually in this dialog box. Show more detail in HotSync Log Tip: Provides troubleshooting information in the log when you perform a HotSync operation. If you are having trouble synchronizing your communicator with your computer, choose this option.
Local Setup Modem Setup Specifies how the HotSync cable connects to your computer: ■ Speed. Determines the speed at which data transfers between your communicator and Palm Desktop software. Try the As Fast As Possible rate first, and adjust downward if you experience problems. This setting allows Palm Desktop software and your communicator to find and use the fastest speed. ■ Port. Identifies the port where you connected the HotSync cable. To connect using a USB cable, select Handspring USB port.
4. Select an application in the Conduit list. 5. Click Conduit Settings. 6. Click the direction in which you want to write data, or click Do Nothing to skip data transfer for an application. Note: Changing the HotSync setting from the default affects only the next HotSync operation. Thereafter, the HotSync Actions revert to their default settings. To use a new setting on an ongoing basis, click Make Default.
Configuring HotSync Manager for infrared communication Next you need to go to the HotSync Manager and configure it for infrared communication. To configure HotSync Manager for infrared communication: 1. Open Palm Desktop software. 2. From the HotSync menu, choose Setup. 3. In the HotSync Controls tab, select Enabled. 4. Click the Serial Port Settings tab. 5. Under Check for handheld connection using, select Local Setup. 6. Under Local Setup, select Infrared Port from the Port pop-up menu.
5. Position your communicator’s IR port within a couple of inches of your computer’s infrared port. 6. Tap the HotSync icon to start the IR HotSync operation. Returning to cable HotSync operations It’s easy to return to using the cable for HotSync operations. To return to cable HotSync operations: 1. If needed, connect the cable to your computer. 2. Open Palm Desktop software. 3. From the HotSync menu, choose Setup. 4. In the HotSync Controls tab, select Enabled. 5. Click the Serial Port Settings tab. 6.
Conducting a wireless HotSync operation Your communicator includes a built-in wireless modem which you can use for wireless synchronization when you are away from your computer. Note: The first HotSync operation must be local, using the cable. After that, you can perform a wireless HotSync operation.
Modem Identifies the modem type or manufacturer. Refer to your modem manual or face plate for its type or settings. If you’re not sure of your modem type or your modem doesn’t match any that appear in the list, select Hayes Basic. If you chose Custom from the Modem pop-up menu, a Custom field appears. Use this field to enter a custom modem setup string. Port Identifies the port for your computer modem. Speaker Turns the computer modem speaker on or off.
6. Enter the telephone number to access the modem connected to your computer. 7. If needed, enter a dial prefix (such as “9”) to access an outside line, and then tap the Dial Prefix check box. Tip: You can enter a comma in the field to introduce a “pause” in the dialing sequence. Each comma equals a two second pause. 8. Select the Disable call waiting check box to avoid an interruption during the wireless HotSync operation. 9.
Performing a wireless HotSync operation After you prepare your computer and your communicator, and select your Conduit Setup options, you are ready to perform a wireless HotSync operation. To perform a wireless HotSync operation: 1. Press Option and then press Menu to access the Applications Launcher. 2. Tap the HotSync icon . 3. Tap the Modem icon to dial the desktop modem and synchronize the applications. 4. Wait for the HotSync operation to finish.
5. Close the Users dialog box. 6. From the User pop-up menu, choose the profile name and create the data for the profile (e.g., company phone list, etc.). To use a profile for the first-time HotSync operation: 1. Connect the new communicator to the HotSync cable. 2. Press the HotSync button on the cable. 3. Select the profile that you want to load on the communicator, and click OK. 4. Click Yes to transfer all the profile data to the communicator.
Page 200 Advanced HotSync® Operations
Appendix A Maintaining Your Communicator This chapter provides information on the following: ■ Proper care of your Treo™ 270 communicator ■ Maximizing battery life ■ Resetting your communicator Caring for your communicator Your communicator is designed to be rugged and reliable and to provide years of trouble-free service. Please observe the following general tips when using your communicator: ■ Take care not to scratch the screen of your communicator. Keep the screen clean.
■ If the battery becomes low in the course of normal use, an alert appears on the communicator screen describing the low battery condition. If this alert appears, connect your communicator to the HotSync cable or travel charger to charge the battery. ■ If the battery drains to the point where your communicator does not turn on, it stores your data safely for about three days. In this case, there is enough residual energy in the battery to store the data, but not enough to turn on your communicator.
Performing a warm (or safe) reset A warm (or safe) reset bypasses system extensions on your communicator, such as HackMaster hacks or system patches. Performing a warm reset enables you to uninstall a third-party application that may be causing a problem. To perform a warm (or safe) reset: 1. Press and hold the top scroll button on the front panel of your communicator. 2. While holding down the top scroll button, use the reset tool (or similar object without a sharp tip) to gently press the reset button.
To restore your data after a hard reset: 1. Open Palm Desktop software. 2. From the HotSync menu, choose Conduit Settings. 3. From the User pop-up menu, select your user name. 4. Select an application in the Conduit list. 5. Click Conduit Settings. 6. Select Macintosh overwrites handheld. Note: Changing the HotSync setting from the default affects only the next HotSync operation. Thereafter, the HotSync Actions revert to their default settings.
Appendix B Troubleshooting Tips If you encounter a problem with your Treo™ 270 communicator: ■ Review this section to see if your problem is listed ■ Check our web site at www.handspring.com for the latest technical support information Note: Thousands of third-party add-on applications have been written for Palm OS® devices. Unfortunately, we are not able to support such a large number of third-party applications.
Operating problems Problem Solution My communicator won’t turn on. Try each of these in turn: ■ Adjust the display settings. ■ Make sure the battery is fully charged. ■ Perform a soft reset. See page 202 for details. ■ If your communicator still does not operate, try a hard reset. See page 203 for details. My communicator keeps turning itself off. Your communicator is designed to turn itself off after a period of inactivity. This period can be set at one, two, or three minutes.
Wireless communication problems Problem Solution I can’t use the wireless features ■ Make sure your Treo battery is charged. ■ Make sure wireless mode is on. To turn on wireless mode, press and hold the power button for at least two seconds, until you hear a confirmation tone. An ascending tone means wireless mode is now on, a descending tone means wireless mode is now off. ■ Make sure your SIM card is properly inserted.
My Treo won't register to the network I tried dialing a phone number, but my Treo just beeps at me ■ You are probably outside a network coverage area. Try using another GSM phone to verify whether coverage is available in your current location. ■ If coverage is available in your location, try your SIM card in another GSM phone. If it still doesn’t work, your SIM card may be malfunctioning. Contact your wireless service provider for another SIM card.
The Blazer® application won’t connect to the Internet ■ Confirm that you wireless service plan includes data services and not just voice minutes. ■ Check with your Internet Service Provider to confirm that your Network Preferences settings are properly configured. 1.Press Option and then press Menu the Applications Launcher. 2.Tap the Preferences icon to access . 3.Select Network from the pick list in the upper-right corner. 4.Check your Username, Password, and the phone number.
I get an error message when I send an SMS message to an email address Make sure you have subscribed to and enabled the SMS Email feature. You need to get the SMS Email Center number from your wireless service provider and enter it in the SMS Preferences dialog. This number is different from the SMS Message Center number you use to send messages to other mobile phone numbers. See page 130 for details.
Application problems Problem Solution I tapped the Today button, but it does not show the correct date. Your communicator is not set to the current date. Make sure the Set Date box in the General Preferences screen displays the current date. See page 22 and page 173 for details. I know I entered some records, but they do not appear in the application. ■ Check the Categories pick list (upper-right corner of the screen). Choose All to display all of the records for the application.
HotSync problems Problem Solution Why can’t I synchronize my communicator with my computer? Try each of these in turn. After each step, try to synchronize to see if the problem persists: ■ Make sure you installed the software that came with your communicator. You must install this software even if you upgraded from another Palm OS handheld. ■ Make sure there are no active calls on your Treo before you begin a HotSync operation.
I tried to do a wireless HotSync operation, but it did not complete successfully. Check the following on your computer: ■ Make sure your computer is turned on and that it does not shut down automatically as part of an energy-saving feature. ■ Make sure the modem connected to your computer is turned on and is connected to the outgoing phone line. ■ Make sure the HotSync Manager is enabled. Open Palm Desktop software, from the HotSync menu, choose Setup. Make sure that the Enabled option is selected.
Beaming problems Problem Solution I cannot beam data to another IR-equipped Palm OS device. ■ Confirm that your communicator and the other device are between ten centimeters (approximately 4") and one meter (approximately 39") apart, and that the path between the two devices is clear of obstacles. Beaming distance to other Palm OS devices may be different. ■ Check the General Preferences screen and make sure the Beam Receive setting is on. ■ Move your communicator closer to the receiving device.
Password problems Problem Solution I forgot the password, and my communicator is not locked. You can use Security to delete the password. If you do this, your communicator deletes all entries marked as private. You can, however, perform a HotSync operation before you delete the password: the HotSync process backs up all entries, whether or not they are marked private. In this case, the following procedure restores your private entries and lets you access them: 1.
Page 216 Troubleshooting Tips
Appendix C Non-ASCII Characters for Login Scripts The following information enables you to create custom login scripts that require non-ASCII characters. It is provided for advanced users who understand the use and requirements of such characters in a custom login script. Use of ^char You may use the caret ( ^ ) to transmit ASCII command characters. If you send ^char, and the ASCII value of char is between @ and _, then the character is automatically translated to a singlebyte value between 0 and 31.
Page 218 Non-ASCII Characters for Login Scripts
Appendix D Advanced Call Forwarding Options Some wireless service providers support advanced call forwarding options through the use of GSM feature codes. These advanced call forwarding options are turned on and off and configured by dialing specific code numbers with your communicator. Note: Not all wireless service providers support all of these codes. Contact your wireless service provider for more information about which services are available to you. To use the advanced call forwarding options: 1.
Forwarding calls that you do not answer Code What it does *61*number_to_ forward_to# Forwards all calls you receive and do not answer. This option is similar to the way that voicemail typically works. *#61# Reports whether or not you activated the call forwarding for calls you do not answer option. #61# Deactivates the call forwarding for calls you do not answer option, and the network stores the number to which you were forwarding calls.
Other Product Information FCC Statement This device may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the device if such interference cannot be eliminated. If you need assistance, contact Handspring Customer Care. This device complies with part 15 of the FCC rules.
Canadian RFI Statement This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada. Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. Read this information before using your integrated multi-service portable radio.
Audio Safety Some hearing aids may be affected by some digital wireless phones. You may want to consult your doctor in the event of you experience interference with your hearing aid while using Treo. When using the speakerphone feature, it is recommended that you place Treo at a safe distance from your ear. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy.
Acknowledgments We would like to thank the following developers whose contributions were an integral part of the Handspring product: ■ C.E. Steuart Dewar Pimlico Software, Inc. www.gorilla-haven.org/pimlico ■ Darren Beck Code City www.codecity.com.au ■ Rick Huebner www.probe.net/~rhuebner/index.
Index Numerics 3-way calling 94 A Accented characters entering 29 onscreen keyboard 33 Active call 91, 93 Add-on applications 40–42 Address Book.See PhoneBook Adjusting volume 14 Alarm preset 117 reminder 117 setting 104 sound 117, 174, 206 for untimed events 104 Anniversaries.
deleting 125 editing 124 Brightness control 14, 19 Business card for beaming 76 Buttons power 15 ringer 15 scroll 14, 85, 122, 132 Buttons preferences 168 C Cable connecting to computer 23 for local HotSync operations 74, 75 USB 24 Calculator Advanced mode 149 Area view 155 Basic mode 148 buttons explained 148, 149–156 Finance view 151 Length view 154 Logic view 153 Math view 150 memory 148 menus 157 opening 55, 148 overview 55 recent calculations 55, 149 selecting mode 148 Statistics view 153 Trigonometry
Communicator contrast control 14, 19 overview 11 turning on/off 18 Compressing Day view 116 Conduits 191 for connecting to PIMs 25 for modem HotSync operations 197 for synchronizing applications 212, 191–192 See also HotSync Conference calls 94 Conflicting events 111 Connecting headset 23 HotSync cable 23 service templates 179 to server or ISP 179 travel charger 17, 24 Connection preferences 169 Contact information.
Sunday or Monday to start week 173 switching views 107 templates 113 To Do List items 112 untimed events 102 Week view 107, 173, 211 Week View with Text 108 Year View 109 Dates Expense item 158 setting current 22, 211 To Do List record due 141, 141–142 Day (Date Book Plus view) 102, 116 Decimal point 173 Default categories 63 currency in Expense 162 settings.
type 159, 162 vendor 160 IR operation 192–194 local operation 75 modem operation 191, 195–198, 213 operations using IR port 192–194 problems with 212–213 setting options 189–191 for synchronizing data 24 F Finding applications 37 information in applications 65–69 phone numbers 67–68 using the Find application 67 Floating events 111 Fonts 74 Formats preferences 172 Forwarding calls 95, 219 SMS Email 130 SMS messages 136 Frozen communicator 206 G Games 174 General preferences alarm sounds 174 auto-off dela
IR port 15 See also Beaming information IR. See Infrared Items. See To Do List or Expense K Key Pad 83, 91 Keyboard accented characters 29 capital letters 27 computer 33 location 14 menu commands 31 moving the cursor 30 numbers 28 online Help 61 onscreen 33 ShortCuts for entering data 32, 186– 187 Keyboard backlight 18 L LED 15, 17 Letters font style 74 onscreen keyboard 33 Light, see LED 15 Linking with desktop software.
Modes handheld 18 wireless 18 Monday, to start week 173 Month (Date Book Plus view) 109 Moving Date Book Plus events 103 the cursor 30 Multi-day events.
private Contacts records 71 sorting Contacts records 70 Pick lists 20 PIM (personal information manager) using with communicator 25 PIN 207 Ports IR on communicator 192 Ports.
Screen blank 206 brightness control 14, 19 calibrating 19, 172 caring for 201 contrast control 14, 19 touching 14 Scroll bar 20 Scroll buttons 14, 21, 85, 122, 132 Searching. See Finding Secondary DNS 181 Security 43–46 changing password 44 deleting password 44 displaying owner’s name 185 forgotten password 46 locking the communicator 45 private records 71 Selecting date for event 101 phone numbers in Contacts list 88 text 60, 61 Sending data.
System requirements for Desktop software 12 System sounds 174 T Tapping 19, 206 Task. See To Do List TCP/IP 174, 184 Technical Support 215 Templates 135 for Date Book Plus 113 Text copying 61 cutting 60 entry.
W Warm reset 203 Web pages bookmarking 123 viewing 121 Web sites 25 Week (Date Book Plus view) 107–108, 173, 211 Week with Text (Date Book Plus view) 108 Wireless mode 18 indicator 80 troubleshooting 207–210 Y Year (Date Book Plus view) 109 Index Page 235
