Replacement Part List

9
Assembly Instructions
1. Attaching Grading Rake
This is done by factory!
a. Insert 3/8” x 1” clevis pins into right and left top holes to desired
position, and attach clevis clip!
2. Attaching Harrow Spikes
Place 2 x 4 spacer under front spike bracket and place 5/8” x 8” harrow spikes
into diamond shaped hole spike down.
Place V-bolts into the holes from the spike side to the front, Place the V-bolts
as sown in diagram. Then twist on 3/8” lock nuts and tighten with wrench till
spikes are secure.
3/8” x 1” Clevis Pin
3/8” x 1” Bolt