Replacement Part List

4
Spike Adjustment
To adjust the Handozer MG spikes to a depth of 1.5”
1. Place the Handozer MG on a flat surface.
2. Place 2 x 4 block on edge under the middle of the spike bracket.
3. Loosen all of the V-bolts holding the harrow spikes.
4. Insert harrow spikes into holes evenly on the flat surface.
5. Tighten all the V-bolt securely.
6. This process is repeated after the harrow spikes wear down over time.
7. 2 x 4 wood blocks make perfect spacers.
2 x 4 Block
After spike adjustment use the “turn buckle” to make minor depth
adjustments for different soil conditions.
Turn Buckle