User's Manual

R-300NP
44
Country
ETSI
Wireless Region. You could choose “ETSI” or “FCC”.
Channel
6
Select the channel ID for wireless connection.
Channel Width
Auto 20/40 MHZ
You could chose “Auto 20/40 MHZ” or “20 MHZ”
Multiple ESSID Setting
ESSID
Wireless-XXXX
_1 ~4
The R-300NP has 4 ESSID. The ESSID is the unique name
that is shared among all points in a wireless network. It is
case sensitive and must not exceed 32 characters. Click
“Edit”, then you can configure more detail of ESSID settings.
The default ESSID name is Wireless-XXXX_1(to 4) “XXXX” is
the last 4 digit of R-300NP WLAN MAC.
Beacon Interval
200
This value valid range is 1 to 1000 indicates the frequency
interval of the beacon.
RTS Threshold
2342
This value valid range is 256-2342. This setting determines
the packet size at which the R-300NP issues a request to
send (RTS) before sending the packet. A low RTS Threshold
setting can be useful in areas where many client devices are
associating with the R-300NP, or in areas where the clients
are far apart and can detect only the R-300NP and not each
other.
Fragmentation
Threshold
2346
This setting determines the size at which packets are
fragmented. Enter a setting ranging from 256 to 2346 bytes.
Use a low setting in areas where communication is poor or
where there is a great deal of radio interference.
Preamble Type
Long Preamble
The preamble type is a section of data at the head of a
packet that contains information the R-300NP and client
devices need when sending and receiving packets. The
setting menu allows you to select a long, short or dynamic
preamble type.