User's Manual

R-300NP
30
Connect on Demand and Max Idle Time
Connect on Demand
Enable
You can configure your R-300NP to cut your connection
with your ISP after a specified period of time (Max Idle
Time). If you have been disconnected due to inactivity,
Connect on Demand enables your R-300NP to
automatically re-establish your connection as soon as
you attempt to access the Internet again. If you wish to
activate Connect on Demand, click the radio button. If
you want your Internet connection to remain, click the
radio button of keep alive.
Max Idle Time
10 Minutes
Keep alive and Redial Period
Keep alive
Disable
This option keeps your PPTP enabled Internet access
connected indefinitely, even when it sits idle.
Click “Apply” button to save the new settings.
After click “Apply” button, the dialog box will appear as below. Click “back” button to go back to
previous page.
Figure 27 Dialog Box