User's Manual

R-300NP
24
Item
Default
Description
System/Host Name
Empty
The system name can consist of up to 50
alphanumeric characters.
Domain Name
Empty
The Domain name can consist of up to 50
alphanumeric characters.
Location Information
Empty
Key in your location information.
Date/Time
NTP Setting
Disable
Enables or disables NTP (Network Time Protocol)
Time Server. Network Time Protocol can be utilized to
synchronize the time on devices across a network.
Server IP/Domain Name
Empty
Enter the IP address/domain name of NTP server.
Time Zone
GMT+8:00
Select the appropriate time zone for your location.
Update Time
24 hours
Enter the number of hours for update time.
Daylight Saving Time
Disable
Enables or disables Daylight Saving Time (DST).
Month/Day
Set the Daylight Saving Time (DST) on the R-300NP.
Adjust the start date and end date.
NAT (Network Address Translation)
NAT
Enable
Enables or disables NAT Address Translation function.
Secure administrator IP
Addresses
Any
Options: Any or Specify. Administrator can specify 5 IP
addresses or a range to allow remote control access
from network.
Allow remote user to ping the
device
Enable
This function allows remote user to ping the R-300NP
through Internet. Ping is normally used to test the
physical connection between two devices, to ensure
that everything is working correctly.
Click “Apply” button to save the new settings.
After click “Apply” button, the dialog box will appear as Figure. Click “back” button to back to previous
page.
Figure 19 Dialog Box