User's Manual

R-300NP
19
Step 4: Wireless Setting
This page allows you to define Country, Channel and 802.11 mode for wireless connection.
Figure 13 Wireless Setting Screen
Item
Default
Description
Country
ETSI
Select Wireless region you located.
Channel
6
Enter the channel ID for wireless connection. You could
choose from Ch1 to Ch11.
802.11 Mode
802.11n+802.11g+802.11b
Enter the 802.11 Mode for wireless connection
802.11n+802.11g+802.11b
802.11n+802.11g
802.11g+802.11b
802.11n only
802.11g only
802.11b only
Item
Default
Description
Connect on Demand and Max Idle Time
Connect on Demand
Enable
You can configure your R-300NP to cut your connection with
your ISP after a specified period of time (Max Idle Time). If
you have been disconnected due to inactivity, Connect on
Demand enables your R-300NP to automatically re-establish
your connection as soon as you attempt to access the
Internet again.
Max Idle Time
10 Minutes
Keep alive and Redial Period
Keep alive
Disable
This option keeps your PPTP enabled Internet access
connected indefinitely, even when it sits idle.
Redial Period
30 sec.