User's Manual

R-300NP
17
 PPPoE (Mostly for ADSL modem users)
If “PPPoE” is selected, below setting screen will appear. Enter the username, password and other
major fields.
Figure 11 Internet Connection Setting Screen—PPPoE Setting
Item
Default
Description
Username
Empty
Enter the user name provided by your ISP.
Password
Empty
Enter the user password provided by your ISP.
PPP MTU Setting
1492
MTU (Maximum Transfer Unit) specifies maximum transmission unit
size.
TCP MSS Setting
1452
MSS (Maximum Segment Size) specifies maximum segment size.
Service Name
Empty
Enter the service name provided by your ISP.
Connect on Demand and Max Idle Time
Connect on
Demand
Enable
You can configure your R-300NP to cut your connection with your ISP
after a specified period of time (Max Idle Time). If you have been
disconnected due to inactivity, Connect on Demand enables your
R-300NP to automatically re-establish your connection as soon as you
attempt to access the Internet again
Max Idle Time
10 Min.
Keep alive and Redial Period
Keep alive
Disable
This option keeps your PPPoE enabled Internet access connected
indefinitely, even when it sits idle.
Redial Period
30 sec.