User's Manual

R-300NP
14
3. Configuring the R-300NP
3-1 Wizard Setup
Step 1: Open your browser, and then enter the factory default IP address 10.59.1.1 in your browser’s
location box. Press Enter.
Figure 5 Web Browser
Step 2: The R-300NP login page will appear. Typing the factory default Username “admin” and
Password “admin” then click Login. If you are first time setting the system, the wizard setup
screen will appear as figure 7. You will be guided, step-by-step, through a basic setup
procedure.
Figure 6 R-300NP login page
Figure 7 Wizard Setup Screen
Note:
 This Web agent is best viewed with IE 9.0 or Chrome and above browsers.
 Username and Password can consist of up to 20 alphanumeric characters and are case sensitive.
 If for some reason your password is lost or you cannot gain access to the R-300NP Configuration
Program, please press the reset button to load the device to manufacturer defaults.
 If the R-300NP doesn’t send packet in 5 minutes (default), the R-300NP wills logout automatically.
Username: admin
Password: admin