User's Manual

In Wall Box Access Point
6
Figure 2 In Wall Box Access Point Front Panel
LEDs Indication
LED State Description
Off The In Wall Box Access Point not receiving electrical power. PWR
Green The In Wall Box Access Point receiving electrical power.
Off The In Wall Box Access Point status is defective.
Green The In Wall Box Access Point status is complete.
SYS
Green
(Blinking)
During firmware upgrades, this system LED will blink.
Off Port has not established any network connection.
Yellow A port has established a valid 10/100Mbps network connection.
LINK / WAN
Yellow
(Blinking)
10/100Mbps traffic is traversing the port.
Off Port has not established any network connection.
Green A port has established a valid 10/100Mbps network connection.
LAN
Green
(Blinking)
10/100Mbps traffic is traversing the port.
Off The Wireless is not ready. WLAN
Green The In Wall Box Access Point has established a valid wireless
1. RJ-45 Transparent Port
2. RJ-45 Ethernet Connector
3. WPS Button
4. Reset Button
5. WLAN
6. SYSTEM
7. POWER
8. LAN Port
9. LINK Port