User's Manual

In Wall Box Access Point
25
Item Default Description
Username admin The username can consist of up to 20 alphanumeric
characters and is sensitive.
Administrator
Setting
Password admin The password can consist of up to 20 alphanumeric
characters and is sensitive.
Date/Time
Date (Year/Month/Day) System Date
The system date of the In Wall Access Point. The valid
setting of year is from 2002 to 2035.
Time (Hour:Minute:Second) System Time The system time of the In Wall Access Point.
-
Click “Get from my Computer” button to correct the
system date and time.
-
Click “Get from NTP server” button to correct the
system date and time.
NTP Setting Disable
Enables or disables NTP (Network Time Protocol)
Time Server. Network Time Protocol can be utilized to
synchronize the time on devices across a network. A
NTP Time Server is utilized to obtain the correct time
from a time source and adjust the local time.
Server IP/Domain Name Empty
Enter the IP address/domain name of NTP server. The
maximum allowed characters length is 100.
Time Zone GMT-12:00 Select the appropriate time zone for your location.
Update Time 0 hours Enter the number of hours for update time.
Disable Enables or disables Daylight Saving Time (DST).
Daylight Saving Time
Month/Day
Set the Daylight Saving Time (DST) on the In Wall
Access Point. Adjust the begin time and end time.
LED Setting Disable Enable or Disable Device LED lighting.
Secure administrator IP
Addresses
Any
Options: Any and Specify. Administrator can specify 5
IP addresses or a range to allow remote control access
from network.
Allow remote user to ping
the device
Enable
This function allows remote user to ping the In Wall
Box Access Point through Internet. Ping is normally
used to test the physical connection between two
devices, to ensure that everything is working correctly.