User's Manual

In Wall Box Access Point
23
Security Setting
Security Disable
Select disable to allow wireless station to communicate with
the device without any data encryption. Select enable to
enable WPA or WEP data encryption.
WPA/WPA2 /Mixed Mode Encryption Wi-Fi Protected Access Encryption
Pre-shared Key Empty Enter a pre-shared key from 8 to 63 case sensitive ASCII
characters.
Group Key
Re-Keying
86400 Seconds Enter a number in the field to set the force re-keying interval.
Pre-shared Key Empty Enter a pre-shared key from 8 to 63 case sensitive ASCII
characters.
Group Key
Re-Keying
86400 Seconds Enter a number in the field to set the force re-keying interval.
WEP
WEP Key 1
This selects which of the Keys the In Wall Box Access Point
uses when it transmits. You can change the selected encryption
key every now and then to increase the security of your network.
Note: You have to configure all WEP keys (1~4), and select one
of the four WEP key.
Enter 5 characters (case sensitive) for ASCII 64-bit WEP Key.
Enter 10 characters (case sensitive) for Hex 64-bit WEP Key.
Enter 13 characters (case sensitive) for ASCII 128-bit WEP Key.
Enter 26 characters (case sensitive) for Hex 128-bit WEP Key.
Click Apply button to save the new settings.
Figure 14 Restart Dialog Box
Click Apply button, the restart dialog box appears. Click on Apply to restart the system.