User's Manual

In Wall Box Access Point
13
Step 3：Launch your browser, and then enter the factory default IP address 10.59.1.254 in your
browser’s location box. Press Enter.
Step 4：.The WAP-001 login screen will appear. In the Username and Password field, type the factory
default user name admin and password admin and click Setup. The WAP-001 setup screen will
appear.
Note: It is important to remember your password. If for any reason you lose or forget your password,
press the reset button located on the top of the device. Reset action will re-initialize the
settings. All configurations, including username, password and IP address(s), will be reset,
and requires re-entering.
Example:
IP Address:10.59.1.109
Subnet Mask:255.255.255.0
Username: admin
Password: admin