User's Manual

In Wall Box Access Point
10
2 Installation
The followings are instructions for setting up the In Wall Access Point. Refer to the illustration and
follow the simple steps below to quickly install your In Wall Access Point.
Step 1：Slide the Bracket to align with screw holes on the In Wall Access Point, and fasten the Bracket
tightly with screws on the In Wall Access Point
Step 2：Slide the WAP-001 into the Bottom Faceplate and fasten tightly into the Bottom Faceplate until
it’s flushed into the wall.
Step 3：Line-up and push the Top faceplate onto Bottom faceplate until snaps securely into place.