User's Manual
Table Of Contents
- 1-1 Package Contents
- 1-2 Features
- 1-3 Precautions
- 1-4 Outlook
- 1-5 Technical Specifications
- 2 Installation
- 2-1 Installation Requirements
- 2-2 Getting Start
- 3 Configuring the GuestWiFi
- 3-1 Setting Wizard
- 3-2 Advanced Setup
- 3-3 System Status
- 3-4 System Tools
- Appendix A Signal Connection Arrangements
- Appendix B Regulations/EMI Compliance
- LIMITED WARRANTY
Easy Hotspot Kit
48
Item Default Description
Service Name Empty Enter the service name provided by your ISP. The service
name can consist of up to 64 alphanumeric characters and is
case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable You can configure your GuestWiFi to cut your connection
with your ISP after a specified period of time (Max Idle Time).
If you have been disconnected due to inactivity, Connect on
Demand enables your GuestWiFi to automatically
re-establish your connection as soon as you attempt to
access the Internet again. If you wish to activate Connect on
Demand, click the radio button. If you want your Internet
connection to remain, click the radio button of keep alive. The
Max Idle Time maximum value is 65535 minutes.
Max Idle Time 10 Minutes
Keep alive and Redial Period
Keep alive Disable This option keeps your PPPoE enabled Internet access
connected indefinitely, even when it sits idle. The Redial
Period maximum value is 65535 seconds.
Redial Period 30 Seconds