User's Manual
Table Of Contents
- 1-1 Package Contents
- 1-2 Features
- 1-3 Precautions
- 1-4 Outlook
- 1-5 Technical Specifications
- 2 Installation
- 2-1 Installation Requirements
- 2-2 Getting Start
- 3 Configuring the GuestWiFi
- 3-1 Setting Wizard
- 3-2 Advanced Setup
- 3-3 System Status
- 3-4 System Tools
- Appendix A Signal Connection Arrangements
- Appendix B Regulations/EMI Compliance
- LIMITED WARRANTY
Easy Hotspot Kit
14
2-2 Getting Start
1. Connect the Ethernet cable to the guestWiFi’s LAN port.
2. Ensure that your modem and computer are both switched on.
3. Use the supplied cable to connect the guestWiFi 's WAN port to the modem. Check that the
Cable/xDSL Status LED lights.
4. Connect your computer to one of the 10/100 LAN ports on the guestWiFi. Check that the LAN Port
Status LED lights.
5. Configure the further parameters via a Web browser.