User's Manual
Table Of Contents
- 1-1 Package Contents
- 1-2 Features
- 1-3 Precautions
- 1-4 Outlook
- 1-5 Technical Specifications
- 2 Installation
- 2-1 Installation Requirements
- 2-2 Getting Start
- 3 Configuring the GuestWiFi
- 3-1 Setting Wizard
- 3-2 Advanced Setup
- 3-3 System Status
- 3-4 System Tools
- Appendix A Signal Connection Arrangements
- Appendix B Regulations/EMI Compliance
- LIMITED WARRANTY
2 Installation
The followings are instructions for setting up the GuestWiFi. Refer to the illustration and follow the
simple steps below to quickly install your GuestWiFi.
Wall-Mounting
The GuestWiFi can be wall-mounted on a wall by applying the two mounting brackets on screws.
Figure 4 Wall-Mounting Bracket - Bottom of GuestWiFi
Please refer to the following instructions for mounting a GuestWiFi on a wall or other surface.
1. Install two screws on a wall according to the relative positions shown below.
Figure 5
2. Hang GuestWiFi on the wall by sliding the two screws in the mounting brackets.
Note: If the screws are not properly anchored, the strain of the cables connected to the GuestWiFi rear
panel connectors could pull out the GuestWiFi from the wall.
Easy Hotspot Kit
11