User's Manual

Handlink AP-100
Commercially Confidential
74
Figure 7-12 Restore to Factory Default
Procedures:
Reset to Factory Default：Press this button to reset AP-100 to Factory Default Configuration.
Keep Network Address Settings: Select this if user doesn’t wish to reset the IP address
configuration to factory default. If this option is not selected, the IP address of AP-100 will be set
back to default IP address: 10.59.100.1.
Once restore to factory default configuration, user can login to the AP-100 with the following
information:
AP-100 default IP address：10.59.100.1
Username：admin
Password：admin
7.7. Backup/Restore
AP-100 supports Backup/Restore，Press Administration -> Backup/Restore to open the
configuration interface