User's Manual

Handlink AP-100
Commercially Confidential
64
5. Beacon Interval set beacon interval
6. Distance set target area distance
7. IGMP Snooping choose IGMP snooping mode if need
8. Multicast Traffic allow or block multicast traffic
9. Multicast Data Rate set multicast data rate
10. Click Submit
11. Click Save&Apply to apply
Warnings ： The default setting for advance is recommended.
6.2.3.1.4. 2.4G Wireless QoS Configuration
Figure 6-41 2.4G Radio QoS Parameters
QoS parameters configuration procedures：
1. Select Configuration->Wireless->Radio0(2.4G)->QoS
2. Set values for this Priority-WMM table
3. Click Submit
4. Click Save&Apply to apply