User's Manual

Handlink AP-100

Commercially Confidential

Figure 6-23 2.4G Radio Parameters

Enable Radio: Enable or disable 2.4G radio, by default it is enabled.

Radio Mode: AP or Station or Repeater.

Country Code: ROW is default setting.

Wireless Mode: By default, it is 2.4GHz 300Mbps (802.11ng HT40+). 2.4GHz 130Mbps

(802.11ng HT20) is recommended.

Radio Frequency: By default, it is 2437MHz (Channel 6).

Transmit Power：By default, it is 20.

Maximum Clients：By default, it is 64.

Enable Inter-WLAN User Isolation：By default, it is disable.

Disable HT20/HT40 Auto Switch：In HT40 mode, enable or disable auto switch between HT40

and HT20.

Procedures:

Select Configuration->Wireless ->Radio0 (2.4G)->General

1 Enable Radio : Select to enable 2.4G Radio

2 Radio Mode: Select to AP mode

3 Country Code: Select your country code