User's Manual

Handlink AP-100

Commercially Confidential

Figure 6-21 STP Setting

Enable Safe Mode：By default, it is disabled.

Ping Host：Three ping hosts can be entered. AP will ping these hosts periodically at the ping

interval configured through its current backhaul link.

Ping Interval：Default setting is 10 seconds.

Procedures:

1 Select Configuration->Network->Sate Mode

2 Enable Safe Mode: Select it to enable safe mode function. By default, it is disabled.

3 Ping Host: at least input one host

4 Ping Interval: input the interval of ping

5 Click Submit

6 Click Save&Apply to apply

6.2.3. Wireless

Select Configuration -> Wireless to access wireless network configuration page. There is 1

interfaces, Radio0 (2.4G).