User's Manual

Handlink AP-100
Commercially Confidential
42
Figure 6-20 Port Forwarding-02
Enable Flag：Enabled flag enables or disables the effect of the particular port forwarding entry. All
the added firewall entries are saved in system configuration file and only the enabled port
forwarding entries will be active.
Local IP Address：This control is used to specify the host which is connected to the internal
network and needs to be accessible from the external network.
Local Port：This control is used to specify the TCP/UDP port of the application running on the host
which is connected to the internal network. The specified port will be accessible from the external
network.
Protocol Type：This control is used to specify the L3 protocol (IP) type which need to be
forwarded from the internal network.
Global Port：This control is used to specify the TCP/UDP port of the AP-100 Wi-Fi Access
Point/Bridge based device which will accept and forward the connections from the external network
to the host connected to the internal network.
Description：This control is used to specify informal field for the comment of the particular port
forwarding entry. Few words about the particular port forwarding entry purpose are saved there
usually.
6.2.2.5. Safe Mode
Select Configuration -> Network -> Safe Mode to access Safe Mode configuration page.