User's Manual

Handlink AP-100
Commercially Confidential
32
z Gateway Mode
Figure 6-9 Network Mode
In Gateway mode, the AP-100 acts as a gateway. The Local IP Address and Local IP Address Mask
information must be provided to specify the IP address used to communicate to the wireless client
locally (i.e. IP address for 2.4GHz radio interface). The AP-100 would use another IP address to
communicate to the outside network (i.e. IP address for Ethernet interface). If a wireless client
sends a packet to the outside network, the packet would send to the AP-100 with its local IP address
in the local network. Then, the AP-100 will pass this packet to the outside network (Ethernet) using
its remote IP address.
Configuration procedures：
1 Select Configuration->Network->General to go to configuration page.
2 Network Setting: Gateway Mode.
3 Click Submit.
4 Click Save&Apply to apply changes.