User's Manual

Handlink AP-100

Commercially Confidential

IPv6 DNS Server：If AP-100 uses static IP, please set DNS IP address

Enable STP Mode：Enable or disable the STP service.

Ethernet/Radio0(2.4G)：LAN interface or WAN interface, only work in gateway mode.

Enable NAT Mode：If NAT Mode is set to "Disabled" then the AP will not perform any network

address translations and all IP traffic will be passed from the wireless clients to the DS (Ethernet)

port or wireless bridge (802.11a radio) without any modification. If NAT Mode is set to "Enabled"

then the AP will perform network address translations on all traffic being passed from the wireless

clients to the DS ( Ethernet) port or wireless bridge (802.11a radio). The NAT will translate IP

traffic address's between the wireless client subnet and the DS subnet.

LAN IP Address：IP address of local area network.

LAN IP Address Mask：IP address mask of local area network.

Ethernet Mode：Auto/manual mode.

Ethernet Duplex：AP Ethernet duplex mode (Full/Half).