User's Manual

Handlink AP-100
Commercially Confidential
28
Daylight Saving Time： By default, it is not selected.
Procedures：
1 Select Configuration->System， to go to system setting page.
2 Type in the system information if it is needed.
3 Add NTP IP address in NTP Server IP.
4 Set NTP Polling Interval
5 Choose local NTP Time Zone
6 Set Daylight Saving Time（Optional）
7 Click Submit
8 Click Save&Apply to commit changes.
6.2.2. Network Configuration
Please select Configuration -> Network to go to Network configuration page.
6.2.2.1. General Network Configuration
Please select Configuration -> Network -> General and start to configure general settings.